Publications

Principal: Dr.Shrinivasa Mayya D

Before joining SIT

  • Shrinivasa Mayya D and K.V.A. Balaji – “Organizational Culture in relation to Work behavior among the Teachers in engineering institutions : An Inter- Correlational Analysis” – Journal of Applied Psychology , Vol. 51, NO.1, pp 38 -42, 2011.
  • Shrinivasa Mayya D and K.V.A. Balaji – “Organizational Climate in relation to Work behavior among the Teachers in engineering institutions : An Inter- Correlational Analysis” – Journal of organizational Behavior, Vol. 51, NO.1, pp 38 -42, 2011.
  • Shrinivasa Mayya D and K.V.A. Balaji – “Quality Assurance Though Supportive Workplace Culture and Climate” – The Indian journal of technical education – Vol. 29, NO.1, pp 24 -27, 2006.
  • Shrinivasa Mayya D and K.V.A. Balaji – Perception of Organizational Climate by Government Aided Engineering College and Self Financing Engineering College Teachers- Indian Journal of Applied psychology vol. 26, pp34-37, 2008.
  • Shrinivasa Mayya D and K.V.A. Balaji – Organizational Climate and Its Effects on Work Behavior among the Government Aided Engineering College and Self Financing Engineering College Teachers’- The Indian journal of technical education – Vol. 31, NO.1, pp 34 -37, 2007.
  • Shrinivasa Mayya D and K.V.A. Balaji – Quality improvement through organization Climate – paper presented in National Conference on “Total quality mgt for continuous quality improvement in technical education” at NMAMIT Nitte, 2-3 March 2006.
  • Shrinivasa Mayya D and K.V.A. Balaji – The Impact of Technology to Culture in Engineering Institutions- paper presented in National Conference on “Building National Competitive Advantage Through Technical Education “ at Dr. AIT,Banglore, 28 -29 Nov 2004.
  • Chandrashekara K. G. and Srinivasa Mayya D. – “Virtual Reality in Flexible Manufacturing System”. National conference on “Emerging Trends in Engineering, Manufacturing system” in Sant Longowal Institute of Engineering and Technology, Longowal on 29th Jan 2004.
  • Chandrashekara K. G. and Srinivasa Mayya D. – “Virtual Environment for Handling Data sets in real time manufacturing system”. National conference on “Emerging Trends in Engineering, Technology and Management” in Adhiyamann Engineering College, Houser, Tamilnadu , Sep 2003.
  • Dr.Chandrashekara K. G. and Srinivasa Mayya D. – “Real time Manufacturing System” National conference on “Computer integrated Design and manufacturing” in Amritha institute of technology Coiambatore, Tamilnadu Nov. 2003.
  • Shrinivasa Mayya D. and K V. A. Balaji Presented a paper on “Quality Assurance Though Supportive work place culture and climate” in the national conference on “Integration of Strategies for Effective Quality Management in Techanical Education”, on 2nd and 3rd Dec. 2004 at NMAM Institute of technology, Nitte.
  • Shrinivasa Mayya D. and S.G. Gopalakrishna Presented a paper on “Curriculum development through Industry-Institution Interaction”” in the national conference on “Industry-institution interaction”, on 2nd Dec. 2003 at NITK, Surthkal.

After joining SIT

  • Dr. Shrinivasa Mayya D Ms. Chandrahas,. “ Fracture toughness of structural flow butt joint weld of low carbon steels”, International journal of engineering trends and technology , May 2016 (ISDN 2231- 5381)
  • Dr. Shrinivasa Mayya D. Ms. Guruprasad Pai, “ Total quality management in engineering institution”, International journal of engineering trends and technology , May 2016 (ISDN 2231- 5381)
  • Dr. Shrinivasa Mayya D, Ms. Sathyaprakesh,. “ A study on manufacturing culture in small and micro industry in india”, International journal of engineering trends and technology , May 2016 (ISDN 2231- 5381)
  • Mr. M Prabhu , Dr. Shrinivasa Mayya D. “ Automatic quantitative sorting milk packets on KMF shivamoga diary”, Proceedings of NCAMES 2016 (National Conference), SIT, Mangaluru .
  • Ms. Sathyaprakesh, Dr. Shrinivasa Mayya D. “ A study on manufacturing culture in small and micro industry in india”, Proceedings of NCAMES 2016 (National Conference), SIT, Mangaluru .
  • Ms. Chandrahas, Dr. Shrinivasa Mayya D. “ Fracture toughness of structural flow butt joint weld of low carbon steels”, Proceedings of NCAMES 2016 (National Conference), SIT, Mangaluru
  • Ms. Guruprasad Pai, Dr. Shrinivasa Mayya D. “ Total quality management in engineering institution”, Proceedings of NCAMES 2016 (National Conference), SIT, Mangaluru
  • Ms. Mahesh C, Dr. Shrinivasa Mayya D. “ Automatic ration dispensary system using HAN”, International Journal for Scietific research and development (IJSRD), , November 2015.
  • Ms. Shwetha N, Dr. Shrinivasa Mayya D. “ Design and Implementation of Accelerometer based Robot motion and speed control with Obstacle detection”, International Journal of Science, Engineering and Technology Research (IJSETR), Volume 2, Issue 3, March 2013.
  • Miss. Swetha N and Dr. Shrinivasa Mayya, “Design and Implementation of Accelerometer Based Robot Motion and Speed Control with Obstacle Detection,” in “A National level student technical paper presentation contest” (COGNIESCIENCE 2013) at NIE, Mysore on 11th May 2013.
  • Dr. Srinivasa Mayya D, Manjunath Prabhu and Dr. Ramacgandra C G, “Automated Quantitative sorting of milk packets in KMF shimoga Dairy” proceeding of National Conference On Advances in Mechanical Engineering Science-International Journal Of Emerging Trends in Technology(IJETT) ISSN 2231-5381, pp. 396-398, May-2016
  • Manjunath Prabhu, Dr. Srinivasa Mayya D and Dr. Ramachandra C G, “Automated Quantitative sorting of milk packets in KMF shimoga Dairy” in a Two Day National Level Conference On “Advances In Mechanical Engineering Sciences ” (NCAMES-2016) at Srinivasa Institute of Technology, Mangaluru on 6th & 7th May-2016
  • Dr. Shrinivasa Mayya D,  Ramakrishna B.B, Prashant Ankalkoti,. “Load Based Active Queue Management Mechanisms”, International Journal of Wireless Information Networks & Business Information System (WINBIS),  ISSN No : 2091-0266; 2013.
  • Dr. Shrinivasa Mayya D Ramakrishna B.B, Prashant Ankalkoti,. “A Survey on New Load Based Active Queue Management Mechanisms”,  International Journal of Scientific &      Engineering Research, Volume 3, Issue 10, October-2012, ISSN 2229-5518; 2012.
  • Srinivas Mayya D, Jerome Anthony, “Licence plate recognition using neural network” , Proceedings of ICETT 2012 (International Conference), Baselios Mathews II College of Engineering, Kollam
  • Shrinivasa Mayya D, Dilip Kumar K, Neelakanta V L & Appu Kuttan – “Dynamics of spring Back Effect of Aluminum Sheet Metal During L-Bending Operation”, Proceedings of ICAMB 2012(International Conference), VIT University, Vellore 632
  • Dilip Kumar K, AppuKuttan K K, Shrinivas Mayya D and Neelakantha.V.L, “Dynamics of Spring Back Effect Of Aluminum Sheet Metal During L-Bending Operation ”presented a paper in 2ndInternational Conference on Advances in Mechanical, Manufacturing and Building sciences ICAMB-2012 held at VIT University, Vellore  during 9-11 January 2012.
  • Shrinivas Mayya D, Mamatha Ajith Prasad, “Adoption of E-learning Systems in Engineering Institutions: A Case Study of Moodle Management System”, International Conference on Technology and Business Management organized at University of Wollongong in Dubai(UOWD), Conferences proceedings , March 26-28, 2012
  • Dilip Kumar K, Appukuttan K K, Shrinivas Mayya D and Neelakantha.V.L, “FEM Modeling Of Aluminum Sheet Metal During L-Bending”, NMD-ATM 2011, Lionoa International center for Exhibition, Hyderabad.Organized by IIM,13-16 November, 2011.
  • Dilip Kumar K, Appukuttan, Shrinivas Mayya D, Neelakantha V L “FEM Modeling Of Aluminum Sheet Metal During L-Bending ” ,NMD ATM 2011, 13-16 November,2011, Hyderabad.Organized by IIM.
  • Ramakrishna B.B, Prashant Ankalkoti, Dr. Shrinivasa Mayya D., “A Survey on New Load Based Active Queue Management Mechanisms “ International Conference on future computing 2012, Department of MCA, R.V College of Engineering, Bangalore, India. Conferences proceedings – 2012.
  • Srinivas Mayya D, Mamatha Ajith Prasad, “Adoption of E-learning Systems in Engineering Institutions: A Case Study of Moodle Management System”, International Conference on Technology and Business Management organized at University of Wollongong in Dubai(UOWD), Conferences proceedings , March 26-28, 2012

 

Computer Science & Engineering

Shivakumar G S

After joining SIT

1.International journals:

  [i].Shivakumar G.S, Dr.S. Natarajan, Dr.K SrikantaMurthy,”Effectiveness of various Supervised Classification Algorithms in Land Use Land Cover Classification”, International Journal of Computer Science and Technology (IJCST), Vol.4,Issue 1 Jan-March 2013. ISSN: 2047-3338 .

[ii].Shivakumar G.S, Dr.S. Natarajan, “  An assessment of various Active Learning Techniques for Classification of Remote Sensing Images”, International journal of Latest Trends in Engineering and Technology(IJLTET),Vol.5 Issue 1 ,Jan-Feb 2015 ,ISSN:2319-3778 .

 [iii].Shivakumar G S,Dr.S Natarajan, Dr.K SrikantaMurthy “Sparse Representation In Active Learning Methods For Remote Sensing Image Classification –A Survey” International Journal of Applied Engineering Research ( IJAER), Vol 10,No:3(2015) PP 6419-6430. ISSN: 0973-4562.

 iv].Shivakumar G S, Dr.Natarajan S, Dr.K Srikanta Murthy, “ Implementation of Multikernel Sparse Representation on Remote Sensing Image Classification”, IEEE Digital Xplore ,IEEE Part number :CFP15D66, ISBN:978-1-4673-92235/15.

[v].Shivakumar G S,Dr.S Natarajan ,Dr.K Srikanta Murthy, “A Novel Template Matching Implementation on Object Based Image Classification Based on Multikernel Fusion Sparse Representation” ARPN Journal of Engineering and Applied Sciences, Volume 11,Issue 11, June 2016, ISSN 1819-6608  .

 

2.International Conferences:

[i]. Shivakumar G.S, Dr.S. Natarajan, Dr.K SrikantaMurthy,” Remote Sensing Image Classification-A Performance Assessment”, International Conference on Advances in Engineering and Technology ICAET2013, Dr.MGR University, Chennai,Tamilnad held on 5th and 6th April 2013.

 [ii].Shivakumar G S, Dr.S. Natarajan S, Dr.K Srikanta Murthy, “ Implementation of multikernel sparse representation on Remote Sensing image Classification”, IEEE sponsored International Conference on Applied and Theoretical Computing and Communication Technology (iCATccT – 2015) , Bapuji Institute of Engineering & Technology (BIET), Davangere, Karnataka, India from 29 – 31 October 2015.

[iii]. Shivakumar G S, Dr.S. Natarajan S, Dr.K Srikanta Murthy, “A Novel Hard threshold based LORSAL algorithm  with MultiHypothesis Prediction for Semi Supervised Learning and Classification of Remote Sensing Images. IEEE sponsored 3rd International Conference on Electronic and Communication Systems -2016 (ICECS’16) held on 25th and 26th Feb 2016 at Karpagam College of Engineering Coimbatore. (Page no.:2969-2973)

 

Faculty Name: RAVISHANKARA K

After Joining SIT

 

  1. Ravishankara K, Vineeth G, “Secure Authentication using Image Steganography and Visual

Cryptography for E-Voting System”, International Journal of Research in Information

Technology (IJRIT), ISSN: 2001-5569, May 2014, Volume 2, Issue 5.

  1. Ravishankara K, Sangram More, “Secure Way of Storing Data and Public Auditing For Data

Storage” International Journal of Research in Information Technology (IJRIT), ISSN: 2001-5569,

May 2014, Volume 2, Issue 5.

  1. Ravishankara K, Thejashwini Anith, “Online book recommendation system for e-shopping using

hybrid association mining, content and personalisation filtering” International Journal of

Emerging Technology in Computer Science and Electronics(IJETCSE), Volume 14, Issue 2, Page

69, April 2015.

  1. Ravishankara K, Shridevi Avvanni, “Visual secret sharing scheme based on random grid method

for multiple secret shares” International Journal of Engineering Research-Online(IJOER) ISSN:

2321-7758, Volume 3, Issue 2, Page 397-401, March-April, 2015.

  1. Ravishankara K, Harsha K V, “An efficient traffic sign board recognition using HSV color

thresholding and Hough transform and its speech conversion” International Journal of Emerging

Research in Management and Technology(IJERMT) ISSN: 2278-9359, Volume:06 Issue: 05,

May 2017.

 

Faculty Name: Nagaraja Hebbar N

After Joining SIT

  • Nagaraja Hebbar ,” Removing Reflection Of Image Using K- Means Clustering”, ICETSE – 2017, ISBN: 978-93-84698-41-6, pp. 126-129, May. 2017.
  • Abhishek, Nagaraja Hebbar,”Embedding Auditing and Logging Mechanism within the Cloud and Security Enhancement”,International Conference on Recent Trends in Engineering & Technology (ICRTET),ISBN : 978-93-81693-88-18 , Bangalore, 24th March, 2013
  • Rohith Vaidya,Nagaraja Hebbar,Securing content based publish/subscribe system by adapting pairing based cryptography mechanism International Journal of Engineering Research Online,ISSN 2321-7758, March 2015
  • Namratha Shetty,Nagaraja Hebbar N ,”An Efficient HTAP Algorithm for Congestion Control in Wireless Sensor Networks”, SECOND NATIONAL CONFERENCE ON RECENT ADVANCES IN SCIENCE, ENGINEERING  AND TECHNOLOGY (NCRASET-14) National Conference NCRASET-14

 

Faculty name: Padmanayana, CSE Department

After joining SIT

PUBLICATIONS: INTERNATIONAL JORNALS

  • Published a article titled “ An AMD algorithm for monitoring suspicious activity in real time automated video survellance system”, in International Journal of Engineering Research & technology(IJERT), ISSN: 2278-0181.
    • Published a article titled “Stateless Multicasting in Ad-hoc Networks guided by motion estimation” in International Journal of Engineering Research and Applications “ (IJERA) , ISSN: 2248-9622.
    • Published a article titled, “Prediction based Channel selection for cognitive Radio Networks” in International Journal of Engineering Research and Applications “ (IJERA) , ISSN: 2248-9622.
    • Published a article titled “ Early detection and classification of pests using image processing”, in International Journal of innovative Research in Electrical,Electronics,Instrumentation and Control Engineering (IJIREEICE), e-ISSN: 2321-2004, p-ISSN: 2321-5526.
    • Published a article titled “Face recognition for obstructed image using AAM”,in International Journal of Innovative Research in Science, Engineering & technology (IJIRSET), ISSN: 2319-8753.
    • Published a article titled”Plant species Identification using color, texture and geometrical feature extraction using SVM classifier,” in International Journal of Emerging Research in Management & Technology(IJERMT)ISSN:2278-9359

 

H.Harshavardhan

Before Join:

Paper presented:

  1. Harshavardhan H, “Dynamics of Modeling in Data Mining: Interpretive Approach to Bankruptcy Prediction” In National Conference on Knowledge Based Computing Systems & Frontier Technologies-NCKBFT-07 held at MIT, Manipal, 19th and 20th

After Joining:

 

  1. H. Harshavardhan., Michell D’Souza., “Creation of MOSAIC IMAGE And DATA HIDING for transmission” International Journal of Emerging Technology in Computer Science and Electronics(IJETCSE), Vol 14, Issue I2, P-106, April-2015, ISSN :0976-1353 (Impact Factor :1.012)
  2. H. Harshavardhan., Sneha., “CP-ABE in Decentarlized Disruption Tolerant Military Networks for Secure Retrieval of Data”, International Journal of Innovative Technology and Research (IJITR), ISSN 2320-5547, April 2015, pp112-115.
  3. H. Harshavardhan., Lavina Jean Crasta., “Technical challenges in Mixed Service Syatems” International Journal of Innovative Technology and Exploring Engineering” (IJITEE), Vol-3, Issue-2,p:39-41 July 2013.
  4. H.Harshavardhan., Shruthi R., “Fuzzy Scheduling for ensuring QoS in VMAC VANET” International Journal of Engineering Research and Applications “ (IJERA) , ISSN: 2248-9622 , 05th July 2013. (Impact Factor 1.69)

 

 

Faculty Name: Aravind Naik

After joining SIT

PUBLICATIONS: INTERNATIONAL JORNALS

  • Aravind Naik and Nishmitha , “Comparison of three techniques of Image forgery detection” in  the International Journal of Emerging Technology in Computer Science and Electronics(IJETCSE), Volume 14, Issue I2, ISSN:0976-1353, April 2015.
  • Aravind Naik and Santhosh Kumar S “ Smart Data Server for Smart Shops”IOSR Journal of Computer Engineering(IOSR-JCE) e-ISSN:2278-0661,p-ISSN:2278-8727 Volume 11, Issue 2(May-June 2013), PP 51-56

 

Faculty Name: Mr. Sudarshan K

After joining SIT

  • Santhosh Kumar S, Sudarshan K.,” Binocular Search Engine Using Android” International Journal of Engineering Inventions e-ISSN: 2278-7461, p-ISSN: 2319-6491 Volume 2, Issue 7 (May 2013) PP: 27-33(Impact Factor:1.786).
  • Santhosh Kumar S, Sudarshan K, Aravind Naik, Athmaranjan K,”Smart Data Servers for Smart Shops” IOSR Journal of Computer Engineering (IOSR-JCE) e-ISSN: 2278-0661, p- ISSN: 2278-8727Volume 11, Issue 2 (May. – Jun. 2013), PP 51-56.
  • Swathi M,B, Sudarshan K.,” A Hybrid Graphical Password Security System Based On Captcha And Data Hiding”, International Journal of Engineering Research (IJOER), ISBN: 2321-7758, Vol.No-3, Issue-2, May-June 2015. PP 117-120.

 

Faculty Name: Rashmi M

After joining SIT

  • Rashmi M, Roshan Fernandes, “Video Retrieval Using Fusion of Visual  Features and Latent Semantic Indexing.” ,International Journal of Innovative Research in Computer  and  Communication Engineering, Vol. 2, Issue 5, May 2014 , pp. 4282-4277.
  • Navya D, Rashmi M, “Securing Remote Medical Sensor Data by  Adapting Paillier Cryptosystem Mechanism.”, International Journal of Innovative Research in Science,  Engineering and Technology, Vol. 5, Special Issue 10, May 2016 ,pp. 133-138.

 

Faculty Name: Manjesh R

After Joining SIT

  • Manjesh R.and Thofa Ayesha, “Inactive Method of Noncausal 2D Image Splice Recognition Model using Markov Model”, The International Journal of Computer Sciences and Engineering (IJCSE), ISSN:2347-2693, Vol No.4, Special Issue No.3, Page No 91-96, May 2016.
  • Manjesh R. and Ankitha Shetty, “Cluster Head Selection Algorithm Enhancement in Mobile Wireless Sensor Network”, The International Journal of Engineering Research (IJOER), ISSN 2321-7758, Vol No. 3, Issue No.2 (Mar-Apr) 2015, Page No. 261-266.
  • Manjesh R. and Sharanya P. S., “Synthesis of Image Content and Textual Details for Image Retrieval based on Association Rule Mining”, The International Journal of Emerging Technology in Computer Science and Electronics (IJETCSE), ISSN 0976-1353, Vol No.14, Issue No.2 (Mar-Apr) 2015.
  • Manjesh R. and Basavaraj Mirji,“Image Fusion based on Face and Iris Feature Vectors”, The International Journal of Research in Information Technology (IJRIT), ISSN 2001-5569, Vol No. 2, Issue No.5 May 2014.
  • Manjesh R. and Pretty Sebastian, “Extractive Caption Generation for News Images”, The International Scientific Journal on Science Engineering and Technology (ISJSET), ISSN 6814-4794, Vol No. 17, Issue No.4, May 2014.

 

Faculty Name: D.S.Rajesh

Before joining SIT

  • B.H.Shekar, D.S.Rajesh, Josef Kittler,“Affine Normalized Stockwell transform based Face Recognition”, in IEEE International Conference on Signal Processing, Informatics, Communication and Energy Systems (SPICES) held at NIT, Calicut, vol. pp 1-6, February, 2015
  • B.H.Shekar, D.S.Rajesh, “Affine Normalized Krawtchouk moments based Face Recognition”, Procedia Computer Science, vol.58, pp. 66-75, 2015, August.
  • B.H.Shekar, D.S.Rajesh, “Logarithmic dyadic wavelet transform based face recognition, Advances in Computing, Communications and Informatics (ICACCI), 2015 International Conference on, pp.1428-1435, 2015, August.
  • B.H.Shekar, D.S.Rajesh, “Approximate Radial Gradient Transform based Face Recognition, Advances in Computing, Communications and Informatics (ICACCI), 2015 International Conference on,2015, pp.1071-1077, 2015, August.
  • B.H.Shekar, D.S.Rajesh, “Reassigned Time Frequency Distribution Based Face Recognition, presented at International conference on computer vision & image processing CVIP (2016) held at IIT, Roorkee, Springer- Advances in Intelligent Systems and Computing Series. 26-28, 2016, February.

After joining SIT

  • B.H.Shekar, D.S.Rajesh, “Stockwell transform based face recognition“, 5th International Conference on Advances in Computing, Communications and Informatics ICACCI (2016), held in Jaipur, pp. 168 – 174, 2016, June .
  • D.S.Rajesh, B.H.Shekar, “Undecimated Dual Tree Complex Wavelet Transform (UDTCWT) based Face Recognition“, 5th International Conference on Advances in Computing,communications and informatics ICACCI, (2016), held in Jaipur, pp. 720 – 726, 2016, June .

 

Faculty name: Kavya Hegde

Before joining SIT

  • Kavya Hegde ,Dr.V R. Udupi. “An Effective Way to Increase Performance by Placement of storage nodes in Sensor Networks” In Mobile Communications.ICETE-12. At NMAMIT,Nitte.INDIA.15,16.May.2012. ISBN 978-81-923974-0-5.
  • Kavya Hegde. “SAGO to assign Maximum Bandwidth for QoS routing in MANETS” CEM-2011.ACEEE,IDES,at JNNC–Shimoga INDIA.27,28.Dec.2011.ISBN:978-90-819067-1-5.

After joining SIT:

  • Kavya Hegde, Abdul Jabbar, “Evaluation and Classifying Misbehaving Nodes in Manet”, ICISTSI2015.At Jain University, Bangalore.INDIA.22-23May 2015.ISBN: 978-981-09-4426-1

 

Faculty Name: Mohan K

After Joining SIT

  1. Mohan K, “GCM Service Driven Communication With An Android Application In Cloud Computing”, International Journal of Engineering Research & Technology (IJERT) ISSN: 2278-0181 Vol. 2 Issue 5, May – 2013

 

  1. Mohan K, Distributed Data Access Control Into Multi-Authority With A Central Certified Authority In Cloud Storage Systems”, International Journal of Ethics in Engineering and Management Education (IJEEE), ISSN: 2348-4748, Volume 1, Issue 4, April 2014.

 

  1. Mohan K, “Secure and Efficient Data Access Controlled by Multi authority In Cloud Storage Systems”, In International Journal of Research in Information Technology (IJRIT),ISSN 2001-5569, Volume 2, Issue 4, April 2014.

 

  1. Mohan K, “QuP – A Query Privacy preserving scheme for Smart Grid Information System”, IJRIT – International Journal of Research in Information Technology, vol. 2, issue 3, pg. 289-296, March 2014.

 

  1. Mohan K, “RaQP – A Range Query Privacy preserving scheme for Smart Grid Information System”, IJEEDC – International Journal of Electrical, Electronics and Data Communication, vol. 2, issue 5, pg. 58-64, May 2014.

 

  1. Mohan K, “Cloud Data Sharing in a Dynamic Group with a Dual Secure Technology”, International Organization of Scientific Research – Journal of Computer Engineering (IOSR-JCE), vol. 16, issue 2, Mar-Apr 2014.

 

  1. Mohan K, “Performance Evaluation of Route Repairing Mechanism and Comparison with AODV”, International Journal of Innovative Technology and Research (IJITR), ISSN 2320 5547, Volume 3 Issue 3,May 2015.

 

  1. Mohan K, “Packet Analysis with Network Intrusion Detection System”, International Journal of Science and Research (IJSR), ISSN (Online): 2319-7064, Volume 4 Issue 2, PP.2246-2249, February. 2015,

 

  1. Mohan K, “Cloud computing and enterprise resource planning (ERP) in cloud environment”, International Journal of advanced Research in computer science and software engineering (IJARCSSE), ISSN (Online): 2277128X, ISSN (Print): 2277- 6451, Volume 5, Issue 4, April-2015.

 

  1. Mohan K, “Autonomous Cloud Computation with Distribution Enactment and Proficient Data Veracity Process”, International Journal of Computer Science and Information Technologies, (IJCSIT), ISSN:0975-9646, Vol. 7 (2) , April 2016.

 

  1. Mohan K, “Self-Governing Cloud Reckoning With Dispersal Presentation and Capable Data Legitimacy Method”,International Journal of Combined Research and Development (IJCRD), eISSN:2321-225X; pISSN:2321-2241 Volume: 5; Issue:3; March -2016.

 

  1. Mohan K, “Independent Cloud Computation with Sharing Enactment and Proficient Data Veracity Process”, International Journal of Computer Engineering and Applications (ICCSTAR-2016), Special Issue, May 2016.

 

 

 

Faculty Name: Alwyn Edison Mendonca

After Joining SIT

  1. Alwyn Edison Mendonca, ” On-the-fly Context based definition fetcher”, IJARET – 2016, ISSN: 2395-2975, Sep. 2016.
  2. Alwyn Edison Mendonca,” Development of Android Based Appication ASKResults”, Scientific & Academic Publishing, p-ISSN: 2163-2944    e-ISSN: 2163-2979, 2017.
  3. Alwyn Edison Mendonca, “High Query Efficiency and High Replica Utilization in P2P File sharing system using EAD” ICCSIT – 2012, ICCSIT-15JUL2012-091.
  4. Alwyn Edison Mendonca, “SEED:Secure, Energy-Efficient and Dependable Routing Protocol using Trust for Clustered WSN’s” ICET – 2014, ICET-11MayBANGALORE-050.
  5. Alwyn Edison Mendonca, “Unusual Events Detective via Global Optical Flow and SVM” ICCSTAR – 2016.

 

Faculty Name: Shashidhara

After Joining SIT

  1. Shashidhara, ” On-the-fly Context based definition fetcher”, IJARET – 2016, ISSN: 2395-2975, Sep. 2016.
  2. Shashidhara, ” Development of Android Based Appication ASKResults”, Scientific & Academic Publishing, p-ISSN: 2163-2944    e-ISSN: 2163-2979, 2017.

 

Faculty Name: Vijetha

After joining SIT:

1.Vijetha, “Applying Blowfish algorithm on mosaicimage encryption and decryption for secure transmission”, International Journal of Recent Trends in Engineering and Research (IJRTER), Volume 2, Issue 5; May 2016.

 

 

 

Electronics & Communications

  • Faculty name: Chinmaya kukkety
 

Before joining SIT: NIL
After joining SIT

  • Published a paper titled “Implementation and performance analysis of DCT-DWT-SVD based water marking algorithms for color images” in National conference on emerging trends in engineering and technology(NCETET-14).
  • Published a article titled “A Review of Block Truncation Coding Using Digital Halftoning” Of IJIRCCE, Volume 2, Issue 8, August 2014ISSN (Online): 2320 – 9801 ISSN (Print): 2320 – 9798
  • Published a article titled “Single switch three level buc conveter with effective LED dimming for low power lighting application ” Of ICETES, Ref no. VOL14I2P6.
  • Faculty Name: Soorya Krishna K

Before joining SIT

  • Soorya Krishna K, Pramod M and M.S. Bhat, “Modeling of Single, Coupled, L and T type interconnects using State Space approach ”, International Journal of Signal and Imaging Systems Engineering from Inderscience Publishers, vol. 2, no. 4, pp. 216-223, ISSN: 1748-0701, October-December 2009.
  • Soorya Krishna K and M.S. Bhat, “Minimization of Via Induced Signal Reflection in On-Chip High Speed Interconnect Lines”, Circuits, Systems and Signal Processing from Springer publications, vol. 31, no. 2, pp. 689-702, ISSN: 1531-5878, April 2012.
  • Soorya Krishna K and M.S. Bhat, “Impedance Matching for the Reduction of Via Induced Signal Reflection in On-Chip High Speed Interconnect Lines”, International Conference on Computer and Communication Technology (ICCCCT-2010) at St. Xavier Catholic College of Engineering, Kanyakumari, pp. 120-125, IEEE, 2010.
  • Soorya Krishna K and M.S. Bhat, “Impedance Matching in Multi- Layer Interconnect Structures to Minimize Signal Reflections in High Speed Applications”, Third International Conference on Signal Acquisition and Processing in Singapore, February 26-28, pp. 250 -54, IEEE, 2011.

After joining SIT

  • Soorya Krishna K and M.S. Bhat, “Impedance Matching in Multi-Layer Interconnect Structures to Minimize Signal Reflections in High Speed Applications”, International Journal of Computer and Electrical Engineering, vol. 4, no. 3, pp. 345-349, May 2013.
  • Colin David Karat and Soorya Krishna K, “ imulation of 8T SRAM Array for Low Power Sensor Application”, IJCA Proceedings on National Conference “Electronics, Signals, Communication and Optimization”, No. 3, 2015.
  • Colin David Karat and Soorya Krishna K, “Design of SRAM Array using 8T Cell for Low Power Sensor Application”, 5th Nirma University International Conference on Engineering (NUICONE), 26 Nov – 28 Nov 2015.
  • Faculty namae: Prof. Ganapathi sharma .K

After Joining SIT.

  • Ganapathi sharma, “Control and monitoring of Robot with smart phone using Raspberry Pi ” Of IJRET volume 3 Issue 6, June 2015. Ref no. ISSN-2001-5569.
  • Ganapathi sharma, “Design of Boost converter for RGB LED’s in Lighting System ICETES Volume 14I2P192 April 2015.ISSN-0976-1353.
  • Ganapathi sharma “An efficient security alarm system using Raspberry Pi and internet of things ” Of IEAE special  Issue 6, June 2016.
  • Faculty Name : Marina Chandy

Before joining SIT :

  • Paper entited:” Crypt mark : A secure invisible watermarking technique for double layer protection of Color Images “ published in proceedings of 11th IEEE International Symposium on Consumer Electronics”( ISCE 2007)
  • Presented technical paper titled “ Walsh Hadamard based Image watermarking scheme” at NATIONAL conference on Image Processing held in Mumbai (11th ,12th February 2005)

After joining SIT :

  • “Submodule distributed Maximum Power point tracking for Solar Photo voltaic Applications” published in International Journal RIT journal Vol3, Issue 5, May 2015
  • “ FPGA Implementation of Image steganography using X bix mapping” National Conference NCEEE-2014 ON 6TH June 2014 held at HKBK College of Engineering, Bangalore
  • Faculty Name : Rakesh Malyya

Before Joining SIT: NIL

After joining SIT

  • Rakesh Malyya, “Design-and-Implementation-of-Single Phase Closed Loop Pure Sine Wave Inverter for Photo Volatoic Applications”, ISSN -0976-1353
  • Faculty Name : Uday J, Asst. Professor, Department of ECE

Before joining SIT

  • Uday J, G H Asha, “Implementation of Modulo 2n+1 Adder and Multiplier”, IJECT, Vol. 5, Issue 2, April-June 2014.

After joining SIT

  • Uday J. et al “Edge Detection of Degraded Stone Inscription Kannada Character”, in Proceedings of IC3T-2016, Springer-AISC Series, Vol 542, pp 11-20, ISSN 2194-5357, 2017.
  • Uday J. et al, “Read and recognition of old Kannada stone inscriptions characters using novel algorithm”, in Proceedings of IEEE Conf. on ICCICCT 2015, pp 284-288, ISBN-978-1-4673-9825-2/15/, 2015.
  • Uday J, G H Asha, “Implementation 32-bit Area Efficient Hybrid Modulo 2n+1 Adder and Multiplier”, in Proceedings of IEEE Conf. on ICCICCT 2014, pp 651-658, ISBN-978-1-4799-4190-2/14, 2014.
  • Faculty Name: Nagalakshmi B Naik

After joining SIT

  • Nagalakshmi B Naik, “Analysis of FMRI Data Based on Prediction of Neural Response Using MVPA” IOSR Journal of Electronics and Communication Engineering (IOSR-JECE) e-ISSN: 2278-2834,p- ISSN: 2278-8735.Volume 11, Issue 3, Ver. IV (May-Jun .2016), PP 45-46.
  • Faculty Name: Deeksha
  • Faculty Name: Deeksha

Before joining SIT

  • Deeksha, “A Switched Inductor Multilevel Boost Converter for Renewable Energy Sources” National Conference on Advances In Electrical Engineering.April 12-13, 2013.

After joining SIT

  • Deeksha, “Analysis of FMRI Data Based on Prediction of Neural Response Using MVPA” IOSR Journal of Electronics and Communication Engineering (IOSR-JECE) e-ISSN: 2278-2834,p- ISSN: 2278-8735.Volume 11, Issue 3, Ver. IV (May-Jun .2016), PP 45-46.
  • Deeksha, et al.“Solar Powered Switched Mode Power Supply to Run Raspberry PI” International Journal of Research in Engineering and Technology e-ISSN: 2319-1163,p- ISSN: 2321-7308.Volume 6, Issue 6,June 2017
  • Faculty Name: Clitus Neil D’Souza

Before Joining SIT,

  • Clitus Neil D’Souza, ChinmayaRaj k, Shivaprasad,”Image Fusion and Enhancement for 2D Images”, ICETE-13, May 15 2013, Proceedings PP.254-257, NMAMIT.
  • Clitus Neil D’Souza,ChinmayaRaj K,Shivaprasad,”Image Fusion and Linear contrast Stretching of 2D color Images”CCSO-2013,10 May 2013 ,Proceedings PP.6-9 ,AIT Bangalore

After Joining SIT.

  • Clitus Neil D’Souza, ChinmayaRaj K, Shivaprasad,”Wavelet Based ALEMH Technique for Fusion of Color Images”, NCACSP-2013, 13 August 2013, Proceedings PP.69-72, SJEC Mangalore
  • Clitus Neil Dsouza”Comparative Study of Different Moving Object Detection and Real Time Implementation Using IOT Based System”IJETCSE, Vol.14, April 2015
  • Clitus Neil Dsouza,Shivaprasad “Gray scale and Color Image Enhancing using Adaptive Bi-Histogram Equalization and Contrast Stertch”IJIR,Vol.3,Feb 2017.
  • Faculty Name: Ms. Flavita Janice Pinto

Before Joining SIT

  • Flavita Janice Pinto, and Rashmi H, “A comparative study on compression and compressed sensing of speech signals,” International Journal of Engineering Research and Technology conference proceeding, vol. 3, pp. 25-28, April 2015.
  • Flavita Janice Pinto,”A comparative study on speech processing based on spoken data in voice characterization “, International Conference on Innovative Research and Solutions,paper id: JJT-IC-049-2015, April 2015.

After Joining SIT

  • Flavita Janice Pinto and Vidya K M, “Solar Powered Logging Detection Using Mobile Phones”, International Journal of  Innovative Research in Computer and Communication Engineering, vol. 4, pp.16674-16679, September 2016.

Information Science & Engineering

  • Faculty name: Mr. Janardhana Bhat K

After joining SIT

  • Saranya Balaram and Janardhan. K , ”Cell Density based Traffic Information system on vehicular Adhoc networks” International Journal of Innovative Research in Electrical,Electronics, Instrumentation and control Engineering, Vol no-3,Special issue-1, April 2015.
  • Faculty Name: Mr. Athmaranjan K

After joining SIT

  • Athmaranjan K , Santhosh Kumar S, Sudarshan K, Aravind Naik “Smart Data Server for Smart Shops ”,  IOSR Journal of Computer Engineering, Volume 11Issue 2, pp- 51-56, 2013.
  • Athmaranjan K, Santhosh kumar S, Lohith, Basavanagouda Patil., “Smart Message Communication for Warrior”, International Journal of Computational Engineering Research, Vol. 3, Issue No. 5, Paper ID 34261, 2013.
  • Faculty Name: Mahiba T

After joining SIT

  • Mahiba T, on “Live Virtual Machine Migration in Dynamic Resource Management of Virtualized Cloud Systems”, International Journal of Latest Trends in Engineering & Technology, vol.1, july, 2013.
  • Mahiba T, Jeyashree, “A Review On Resource Management In Cloud Computing”, the International Conference on Cloud Computing and Computer Science (ICCCS), May 2013.
  • Faculty Name: Ms. Swathi

Before joining SIT

  • Sharmila M Kumari and Swathi Salian. “Appearance based Techniques for Face Recognition: A Comparative Study”, IJCA Proceedings on International Conference on Information and Communication Technologies ICICT(5):1-7, October 2014.
  • Sharmila Kumari , Swathi Salian, “Discriminative DCT Based Face Recognition: An Efficient and Accurate Approach”, International Journal of Innovative Research in Computer and Communication Engineering (IJIRCCE), Vol.2, Special Issue 5, ISSN (Print): 2320-9798, 2014.

After joining SIT:

Electrical & Electronics

  • Faculty name: Sulthan Mohyuddin

After joining SIT:

  • Sulthan Mohyuddin, “Simulation and analysis of electric field distribution on porcelain disc insulators under dry and clean conditions using finite element method”, International Journal of Science Technology & Engineering in Volume 2, Issue II, May 2016.
  • Sulthan Mohyuddin, “Eco-friendly grass cutter”, International Journal for Scientific Research & Developments in Volume 4, Issue III, May 2016.
  • Sulthan Mohyuddin, “Analysis of electric potential distribution on ceramic disc insulators under dry and clean conditions using ANSYS”, International Journal for Scientific Research & Developments in Volume 4, Issue III, May 2016.
  • Sulthan Mohyuddin, “Automatic grass cutter”, International Journal of Science Technology & Engineering in Volume 2, Issue II, May 2016.
  • Sulthan Mohyuddin, “Simulation of potential and electric field distribution for different parts of insulator using FEM”, International Journal of Informative & Futuristic Research Volume 3, Issue 9, May 2016.
  • Sulthan Mohyuddin, “FPGA based reconfigurable radix 4 and radix 22 FFT architecture for WiMAX”, International Research Journal of Engineering and Technology in Volume 3, Issue 7, July 2016.
  • Sulthan Mohyuddin, “A programmable logic controller based power factor controller for a single phase induction motor”, International Journal of Engineering Science and Computing in Volume 7 Issue No.2, Feb 2017.
  • Sulthan Mohyuddin, “Controlling of P.F. for induction motor by using PIC controller”, International Journal of Advanced Research in Electrical, Electronics and Instrumentation Engineering in Volume 6, Issue 3, March 2017.
  • Faculty name: Vinay BK

After joining SIT:

  • A Zero Voltage Transition based Boost Converter for Power Factor Correction and its Application IJSRD – International Journal for Scientific Research & Development| Vol. 4, Issue 10, 2016 | ISSN (online): 2321-0613 Page no. 281-284
  • Resonant Circuit with Soft-Switching Performance of a Boost Converter for PFC with ZVS and/or ZCS IJSTE – International Journal of Science Technology & Engineering | Volume 2 | Issue 06 | December 2015 ISSN (online): 2349-784X Page no. 113-118
  • Resonant Circuit with Soft-switching Performance of a DC-DC Converter for PFC with ZV Switching SS International Journal of Multidisciplinary Research, ISSN: 2395-7964, Volume-2, issue-09 Dec-2015. Page no. 72
  • Faculty name: Harshith K

After joining SIT:

  • Published a paper titled, “Simulation of Potential and Electric Field Distribution for Different Parts of Insulator Using Finite Element Method “, in International Journal of Informative & Futuristic Research(IJIFR), Vol 3/E9/056, May 2016, PP 3448-3454. ISSN: 2317-1697
  • Published a paper titled, “FPGA based Reconfigurable FFT Architecture for Communication System “, in International Journal of Innovations in Engineering and Technology (IJIET), Vol 7, Issue- 1, June 2016 , ISSN: 2319-1058
  • Published a Paper Titled, “ Bladeless Wind Power Generation” in International Journal for Scientific Research & Development (IJSRD), Vol 4, Issue 3 in May 2016, ISSN: 2321-0613
  • Published a paper Titled “FPGA based Reconfigurable Radix 4 and Radix 2 2 FFT Architecture for WiMAX” in International Research Journal of Engineering and Technology (IRJET), Vol 3, Issue 7, July 2016, e-ISSN: 2395-0056, p- ISSN: 2395-0072.
  • Published a paper Titled “Single phase dual stator windings synchronous generator” in International Journal of Engineering Science and Computing (IJESC), Vol 7, Issue 3, March 2017, e-ISSN: 2250-1371.
  • Published a paper Titled “Single phase permanent magnet dual stator Induction generator” in International Journal of Advanced Research in Electrical, Electronics and Instrumentation Engineering (IJAREEIE), Vol 6, Issue 3, March 2017, p-ISSN: 2320-3765.

Automobile

  • Faculty Name: Dr. Ramakrishna N. Hegde

Before Joining SIT

International Journals:

  • Ramakrishna Hegde, Shrikantha S. Rao, R. P. Reddy, “Flow visualization, critical heat flux enhancement and transient characteristics in pool boiling using nanofluids”, Journal of ASTM International (JAI), Vol. 9, No. 5,2012, Paper ID JAI104443.
  • Ramakrishna Hegde, Shrikantha S.Rao, R.P.Reddy “Investigations on boiling induced nanoparticle coating, transient characteristics and effect of pressure in pool boiling heat transfer on a cylindrical surface”, Experimental Heat Transfer, Taylor & Francis, (2014 Impact factor 0.425, 5-Year Impact factor 0.802, H –INDEX – 20).
  • Ramakrishna Hegde, Shrikantha S. Rao, R. P. Reddy, “Boiling induced nanoparticle coating and its effect on pool boiling heat transfer on a vertical cylindrical surface using CuO nanofluids”, Heat and Mass Transfer, Springer – Verlag Publications, DOI 10.1007/s00231-012-0996-8, published online: 07 April 2012 ( 2014 Impact factor 0.929, H –INDEX – 35).
  • Ramakrishna Hegde, Shrikantha S. Rao, R. P. Reddy, “Investigations On Heat Transfer Enhancement In Pool Boiling With Water-CuO nanofluids” Journal of Thermal Science, Springer -Verlag publications, 21(2), 179 -183, 2012( 2014 Impact factor 0.348, H –INDEX – 12).
  • Ramakrishna Hegde, Shrikantha S. Rao, R. P. Reddy, “Flow visualization and study of CHF enhancement in pool boiling with Al2O3 – water nano-fluids”, Thermal Science – International Scientific Journal, DOI: 10.2298/TSCI100511095H (2014 Impact factor 0.962, H –INDEX – 12).
  • Ramakrishna Hegde, Shrikantha S.Rao, R.P.Reddy, “ Studies on Nanoparticle Coating due to Boiling Induced Precipitation and Its Effect on Heat Transfer Enhancement on a vertical cylindrical surface”, Experimental thermal and Fluid Science- Elsevier publications, 38, 229 –236, 2012 (2014 Impact factor 1.267, 5-Year Impact factor 2.08, H –INDEX – 54).
  • Ramakrishna Hegde, Shrikantha S. Rao, R. P. Reddy, “Experimental studies on CHF enhancement in pool boiling with CuO-water nanofluid”, Heat and Mass Transfer, Springer-Verlag Publications, DOI 10.1007/s00231-011-0955-9, published online: 03 Jan 2012 ( 2014 Impact factor 0.929, H –INDEX – 35).
  • Ramakrishna Hegde, Shrikantha S. Rao, R. P. Reddy, “ Experimental Study On CuO Nanoparticles in Distilled Water and its Effect On Heat Transfer”, International Journal Of Nanoparticles, Inderscience Publications-Switzerland, 5(1), 16-36, 2012( H –INDEX – 5).
  • Ramakrishna Hegde, Shrikantha S. Rao, R. P. Reddy, “Experimental study on CuO nanoparticles and its effect on heat transfer on a vertical surface”, Journal of Mechanical Science and Technology, Springer -Verlag publications, 25 (11) 2927~2934, 2011. (2014 Impact factor 0.932, 5-Year Impact factor 1.200, H –INDEX – 20).
  • Ramakrishna Hegde, Shrikantha S.Rao, R.P.Reddy, “Role of surface roughness in pool boiling with alumina-water nanofluid on a horizontal wire surface”, Journal of Heat and Technology, 29(1):165-171, 2011, ETS printers, Italy. (2014 H –INDEX – 14).
  • Ramakrishna Hegde, Shrikantha S. Rao, R. P. Reddy, ” Behavioural study of Alumina nanoparticles in pool boiling heat transfer on a vertical surface”, Heat Transfer Asian Research, Wiley- Blackwell, International Journal, 40(6), 483–576, 2011. (2014 – H –INDEX – 12).
  • Ramakrishna Hegde, Shrikantha S. Rao, R. P. Reddy, “ A Comparative Study Of Heat Transfer Enhancement in Pool Boiling with CuO and Alumina Nanofluids”, International Journal of Nanotechnology and Applications, , RI publications, 5(1), 2011.
  • Ramakrishna Hegde, Shrikantha S. Rao, R. P. Reddy, “Critical heat flux enhancement in pool boiling using Alumina Nanofluids”, Heat transfer Asian Research, Wiley- Blackwell, International Journal, 39(5), 323 – 331, 2010. (2014, H –INDEX – 12).
  • Ramakrishna Hegde, Shrikantha S. Rao, R. P. Reddy, “Pool boiling heat transfer characteristics and flow visualization of Al2O3 – water nano-fluids”, International Journal of Mechanical and Automotive Engineers, 8(3), 34-39, 2010.

International Conferences:

  • Ramakrishna Hegde, Shrikantha S. Rao, R. P. Reddy, “Experimental Investigations of Pool Boiling Heat Transfer Characteristics on a Vertical Surface Using CuO Nanoparticles in Distilled Water”, International Conference On Thermal Energy and Environment, INCOTEE 2011,Kalasalingam University, Tamilnadu, March 24 – 26, 2011
  • Ramakrishna Hegde, Shrikantha S. Rao, R. P. Reddy, “ Heat transfer performance of a newly designed compact heat exchanger using alumina nanofluid” International Conference On Design and Advances in Mechanical Engineering, ICDAAME-2011, SKP Engineering College, Tiruvannamalai, Tamilnadu, December 16 – 17, 2011
  • Ramakrishna Hegde, Shrikantha S. Rao, R. P. Reddy, “Investigations on heat transfer enhancement using CuO –Water nanofluids” ,International conference at Chennai , ICFET-2010 ,Saveetha University, Chennai, April 29,30 2010
  • Ramakrishna Hegde, Shrikantha S. Rao, R. P. Reddy, “Experimental investigation on heat transfer enhancement using Alumina –Water Nanofluids” International conference on Frontiers In Mechanical Engineering, FIME 2010, May 20, 21,22 2010
  • Ramakrishna Hegde, Shrikantha S. Rao, R. P. Reddy, “Flow visualization in pool boiling with Al2O3 – water nanofluid on a horizontal test surface and its effect on CHF enhancement” International Conference AMMMT-2010, SIT Tumkur,Nov,18-19-2010
  • Ramakrishna Hegde, Shrikantha S. Rao, R. P. Reddy, “ A Comparative Study Of Heat Transfer Enhancement in Pool Boiling with CuO and Alumina Nanofluids” International conference,ICTT-2010,College of Engineering, Trivandrum, Nov 24,25,26-2010
  • Ramakrishna Hegde, Shrikantha S. Rao, R. P. Reddy, “Forced convection heat transfer of Nanofluids-Current research Scenario” International conference On Emerging research and advances in mechanical Engineering, ERA-2009, Velammal College of Engineering, Chennai, March 19-21, 2009

After joining SIT

Journal publication:

  • Niranjan Rai, Ramakrishna N. Hegde, “ Investigations on Heat Transfer Enhancement in Helical Coil Heat Exchanger Using CuONanofluid”, International Journal Of Engineering Trends andTechnology, ISSN: 2231-5381, Special Issue, May 2016, pp52-55,
  • Ramakrishna N. Hegde, Ashok Gond, “Characterization and Suitability of MahuaCotton Seed Oil Blends as an Alternate Fuel for CI Engine”, International Journal Of Engineering Trends andTechnology, ISSN: 2231-5381, Special Issue, May 2016, pp56-62,
  • Ramakrishna N. Hegde, Jagadish B., “Performance and Emission Characteristics of Cotton seed and Simarouba Oil Blend on a Single Cylinder Four Stroke CI Engine”, International Journal Of Engineering Trends andTechnology, ISSN: 2231-5381, Special Issue, May 2016, pp 130-135.
  • Manjunath S., Ramakrishna N. Hegde, “Performance and Emissions characteristics of Biodiesels in IDI Diesel Engines – A review”, International Journal Of Engineering Trends andTechnology, ISSN: 2231-5381, Special Issue, May 2016, pp 179-183.
  • Ramakrishna Hegde, Shrikantha S.Rao, R. P. Reddy, “Experimental investigations of pool boiling heat transfer characteristics on a vertical surface using CuO nanoparticles in distilled water”,  Heat Transfer Engineering (HTE), Taylor and Francis Journal, Volume 35Issue 14-15, 2014, pp- 1279-1281, (2014 Impact factor 0.902, 5-Year Impact factor 1.200, H –INDEX – 34).
  • Srinath J., Ramakrishna N. Hegde, “Technologies of sulphur dioxide reduction in coal fired thermal power plant”, International Journal of Mechanical Engineering & Technology (IJMET), Volume 5, Issue 9, 2014
  • Dr Ramakrishna N. Hegde, Jagadeesh Bantwal, “ Characterization of Cotton Seed and Simarouba Oil Blend and Exploration of its Suitability as an Alternate Fuel for CI Engine”, Asian Journal of Engineering and Technology (ISSN: 2321 – 2462) Volume 03 – Issue 04,468-479, Special issue for ICETTAS’15

Conference publication

  • Niranjan Rai, Ramakrishna N. Hegde, “ Investigations on Heat Transfer Enhancement in Helical Coil Heat Exchanger Using CuONanofluid”, National Conference on Advances in Mechanical Engineering Science (NCAMES-2016), Srinivas Institute of Technology, Mangalore, May 2016, pp52-55,
  • Niranjan Rai, Ramakrishna N. Hegde, “Characterization and Suitability of MahuaCotton Seed Oil Blends as an Alternate Fuel for CI Engine”, National Conference on Advances in Mechanical Engineering Science (NCAMES-2016), Srinivas Institute of Technology, Mangalore1, May 2016,, pp52-55,
  • Ramakrishna N. Hegde, Jagadish B., “Performance and Emission Characteristics of Cotton seed and Simarouba Oil Blend on a Single Cylinder Four Stroke CI Engine”, Srinivas Institute of Technology, Mangalore1, May 2016,, pp 130-135.
  • Ramakrishna N. Hegde and Jagadeesh Bantwal, “Characterization of Cotton Seed and Simarouba Oil Blend and Exploration of its suitability as an Alternate Fuel for CI Engine”, 2nd International Conference on Emerging Trends in Technology & Applied Sciences, SAINTGITS CLLEGE OF ENGINEERING, Kottaym, Kerala, India, 2nd May 2015.
  • Ramakrishna N. Hegde, Jitin, M., “ Innovative Wind Energy Generation by INVELOX” International conference on Mechanical and Production Engineering (ICMPE), pp. 158-162, Cochin, 19th April, 2015.
  • Ramya, M., Ramakrishna N. Hegde,“ Performance evaluation and optimization Of ZGM123n coal mill at thermal power Plant” in Proceedings of the 2nd International Conference on Current Trends in Engineering and Management ICCTEM-2014 17 – 19, pp. 362-367, July 2014, Mysore, Karnataka, India.
  • Ramya, M., Ramakrishna N. Hegde, “Study on Setting the Performance Parameters of Coal Mill for Optimum Results” International Conference on Emerging Trends in Engineering (ICETE -2014) , pp. 151-157, NITTE 15th – 17th May, 2014
  • Srinath J., Ramakrishna N. Hegde, “Evaluation of Effectiveness and Flue Gas – Liquid Transfer in Flue Gas Desulphurization Plant” ,in International Conference on Emerging Trends in Engineering (ICETE -2014) , pp. 158-162, NITTE 15th – 17th May, 2014
  • Faculty Name: Deepak Raj P. Y

After Joining SIT

  • Deepak Raj P. Y and Subodh H. M “Design, Analysis and Testing of Wing spar for Optimum Weight” in IJRSI, ISSN: 2321 – 2705, Vol. 4 – Issue VII: pp. 104 – 112, July – 2017.
  • Deepak Raj P. Y and Sandeep Duvani “Design, Fabrication and Aerodynamic Analysis of a modified Archimedes Wind turbine” in IJRSI, ISSN: 2321 – 2705, Vol. 4 – Issue VS: pp. 55 -59, May – 2017.
  • Deepak Raj P. Y and Rajashekarareddy H. G “Experimental and Computational study of Incompressible flow over a NACA 642-215 airfoil” in “National Conference on Advanced Mechanical Engineering and Sciences”, pp. 137 -138 at SIT, Mangalore, D.K, India on 7th May 2016.
  • Deepak Raj P. Y and Devaraj K “Numerical Heat Transfer Analysis of a Flat Plate using Combined Jet Impingement and Film cooling with Flow Patterns” in International Journal of Engineering Research and Technology, ISSN: 2278 – 0181, Vol. 2 – Issue 11: pp. 2078 – 2086, Nov- 2013.
  • Faculty Name: Jagadeesh B

Before Joining SIT

  • Dr. Ramakrishna N. Hegde and Jagadeesh Bantwal “Characterization of Cotton Seed and Simarouba Oil Blend and Exploration of its suitability as an Alternate Fuel for CI Engine” in Asian Journal of Engineering and Technology 2015, ISSN:2321-2462, Vol 3: pp. 467- 479.
  • Dr. Ramakrishna N. Hegde and Jagadeesh Bantwal “Characterization of Cotton Seed and Simarouba Oil Blend and Exploration of its suitability as an Alternate Fuel for CI Engine”, in“a2nd International Conference on Emerging Trends in Technology & Applied Sciences” at SAINTGITS CLLEGE OF ENGINEERING, Kottaym, Kerala, India on 2nd May 2015.
  • Dr. Ramakrishna N. Hegde and Jagadeesh Bantwal “Characterization and Performance studies of cotton seed and Simarouba oil blend on a four stroke single cylinder diesel engine”, in “ A National Conference on Green Energy: Potentials &Applications” at VCET, Puttur, D.K, India on 14thMay 2016.

After Joining SIT

  • Dr. Ramakrishna N. Hegde and Jagadeesh Bantwal “Performance and Emission Characteristics of Cotton seed and Simarouba oil bend on a Single Cylinder Four Stroke CI Engine”, in “ A National Conference on Advances in Mechanical Engineering Sciences” at SIT, Mangalore, D.K, India on 7thMay 2016.
  • Dr. Ramakrishna N. Hegde and Jagadeesh Bantwal “Investigations on Engine performance and emission with CSS and CSM oil blends as a Partial replacement Bio – fuel”, in “a International conference on Design and Advances in Mechanical Engineering” at SKP Engineering college, Tiruvannamalai, Tamil nadu, on 2nd February.
  • Faculty Name: Pavana K

After Joining SIT

  • Pavana K. “Aerodynamic Performance of A Ducted Propeller” in International Conference on Emerging Research in Management and Technology and published in the International Journal of Emerging Research in Management & Technology (IJERMT), ISSN: 2278-9359,Vol. 6 – Issue 5, May 2017.
  • Faculty Name: Girish A R

Before Joining SIT

  • Girish A R, Modeling & Simulation of Thermal Hydraulic Systems” under TEQIP-II on 15th& 16th April 2013 at Dr.AIT, Bangalore.

After joining SIT

  • Girish A R, “Review on Experimental Analysis of Pulse Detonation Engine and Its Merits”, International Journal of Engineering Trends and Technology, ISSN: 2231-5381, May 2016, Page 144-148.
  • Girish A R, “CFD Simulation of Centrifugal Blower Using ANSYS CFX”, International Journal of Engineering Trends and Technology (IJETT), ISSN: 2231-5381, May 2016, Page 34-38.
  • Girish A R, “Experimental Investigation of Biolubricant Formulated from Chemically Modified Castor Oil”, Topical Transcend in Mechanical Technology (TTMT), “International Digital library of technology and research” (Scopus Indexed), May 2017.
  • Faculty Name: Jerome Anthony

Before Joining SIT

  • Jerome Anthony and Dr. Shrinivas Mayya D “license plate recognition using neural network” Baselios Mathews emerging technology, ICETT . 529-551 Feb 2012

After Joining SIT

  • Jerome Anthony “Chassis Dynamometer” in “National Conference on Advanced Mechanical Engineering and Sciences”, pp. 136 -137 at SIT, Mangalore, D.K, India on 7th May 2016.
  • Faculty Name: Amit Kumar H

After Joining SIT

  • Amitkumar.H. “Energy Absorption Analysis of Rupd.” The International Journal of Research in Engineering and Technology, vol. 04, e-ISSN:2319-1163, p-ISSN:2321-7308, Feb. 2015.
  • Faculty Name: Ramaswamy M P

Before Joining SIT

  • Ramaswamy M P, Assoc prof Mahesh B Davangeri, “Investigation on the effect of heat treatment on impact, hardness and tribological behavior of AISI 316L DSS ”, International Conference on Mechanical & Industrial Engineering, 02nd June-2013, Bengaluru, ISBN: 978-93-83060-05-4.
  • Ramaswamy M P, Assoc prof Mahesh B Davangeri, “Investigation on the effect of heat treatment on impact, hardness and tribological behavior of AISI 2507 DSS ”, National Conference on Innovation in Mechanical Engineering “NCIME”, 21nd and 22rd June-2013, madanapalle.

After Joining SIT

  • Ramaswamy M P . “Investigation on the Effect of Heat Treatment on Microstructure and Tribological Behavior of AISI 2507 DSS” The International Journal of engineering trends and  technology (IJETT), vol. ISSN, pp. 2231-5381, 6th and 7th MAY. 2016, Srinivas Insitute of Technology, Mangaluru

Department of Mechanical Engineering (I Shift)

  • Faculty Name: Dr. Thomas Pinto, Professor &Head

Before Joining SIT

  • Thomas Pinto, S. George Milton, Experimental investigation on the effect of some vegetable oil based coolants on tool life and surface integrity in turning IS2062 and C-45 grade steels using HSS and WC tools, National Conference on Advances in Mechanical Engineering, AME-09, 5th Oct, 2009, VVIET, Mysuru.
  • Thomas Pinto, S. George Milton, Cooling aspects of vegetable oil based cutting fluids in metal cutting, Proceedings of national conference on emerging trends in industrial Engineering and management, BMS college of Engineering, Bangalore, Feb 27-28, 2009.
  • Thomas Pinto, S. George Milton, Effect of Bio-based Coolants on Tool life Criteria in Turning of Steels, Proceedings of International Conference on Recent Advances in Material Processing Technology, National Engineering College, Kovilpatti, Tamilnadu, Feb, 25-27, 2009.
  • Thomas Pinto, S. George Milton, A study on cooling aspects of Bio-based coolants in turning of Steels, Proceedings of the National Conference on Advances in Mechanical Engineering-2008, Oct 28-30, 2008, Manipal Institute of Technology, Manipal University.
  • Thomas Pinto, S. George Milton, Economical Aspects with use of Bio-based coolants in Metal cutting Applications, Proceedings of International Conference on Total Engineering Analysis and Manufacturing Technologies 22-24, Sept-2008, Indian Institute of Science, Bengaluru.
  • Thomas Pinto, S. George Milton, Use of vegetable oil based coolants for Cost Effectiveness in Manufacturing processes, 23rd National Convention of Production Engineers, Bengaluru, May 2008.
  • Thomas Pinto, S. George Milton, Experimental investigation on surface roughness with distilled water as coolant in turning operation, TEAMTECH-2007, International Conference at IISc., Bengaluru, Oct 2007
  • Thomas Pinto, T.R. Hemanth Kumar, D. Ramesh, Micro drilling using advanced Techniques, proceedings of National Conference on World class Manufacturing BEC, Bagalkot, April 2007.
  • Thomas pinto, S. George Milton, Biodegradable Cutting Fluids – National Conference on Bio Fuels on 23,24, 25th Match 2006 , NITK, Suratkal.
  • Thomas Pinto, Dry Machining, Proceedings of First National Conference on Development and Challenges in Manufacturing Engineering, 18th, 19th, 20th March 2004, Manipal Institute of Technology, Manipal.
  • Thomas Pinto, S. George Milton, Effect of Vegetable oil Based Coolants on Surface Roughness in Turning Ferrous and Nonferrous Materials, Journal of Manufacturing Technology Today, Vol. 8, No. 5,May ‘09, pp 3-7.
  • Thomas Pinto, S. George Milton, An Experimental Study of the Effect of Bio-based Coolants in Turning of Steels using HSS and Uncoated WC Tools, Journal of Cooperation among University, Research and Industrial Enterprises, BITS, Pilani, Vol.2, Issue 4, January 2010
  • Thomas Pinto, S. George Milton, Experimental Investigation on Performance of Crop Based Cutting Fluids in Turning IS2062 and EN8 Steel Using HSS and Uncoated Tungsten Carbide Tools, Manufacturing Technology & Research – An International Journal, Vol.5, No.3-4, July-Dec 2009

After joining SIT

  • Mr. Rudresh Gowda K.G, Dr. Thomas Pinto, Development and Interfacing of Quick ChangRobot for Tool Change Between Two CNC Machine and Reduction of Tool Changing Time, National Conference on Advances in Mechanical Engineering Sciences, SIT, Mangaluru, 6-7 may 2016
  • Palayat Roshen Hemanth, Thomas Pinto, Automation of an Industrial Grade Steam Generatio System Using GSM Technology, National Conference on Advances in Mechanical Engineering Sciences, SIT, Mangaluru, 6-7 may 2016
  • Dr. Thomas Pinto Innovative and Best Practices in Teaching-Learning Process of HigherEducation – A Case of Technical Education, National Seminar on Curriculum Design for Studendt Centric Learning, SIMS, Mangaluru, 25-26 March 2016
  • Shahsank S, Dr. Thomas Pinto, Mahendra S B, Comparative Study on Casting Pattern Using Conventional Method and Rapid Prototyping, National Conference on Advances in Mechanical Engineering Sciences, SIT, Mangaluru, 6-7 may 2016
  • Naveen C R, Dr. Thomas Pinto, Machanability of Hybrid Metal Matrix Composites- A Review National Conference on Advances in Mechanical Engineering Sciences, SIT, Mangaluru, 6-7 may 2016
  • Nithin Joshuva, Dr. Thomas Pinto, A Study on Analysis of Condition Based Maintainance for General Purpose Machineries for Fault Diagnostics – A Review, National Conference on Advances in Mechanical Engineering Sciences, SIT, Mangaluru, 6-7 may 2016
  • Naveen C R, Dr. Thomas Pinto, Ranganath Y H, Production & Characterization of As Cast and Heat Treated Al2024/SiC/Gr Hybrid Metal Matrix Composites, International Conference on Advances in Mechanical Sciences(ICAMS-2017), Malnad college of Engg., Hassan, March 3rd to 5th 2017
  • 8. Naveen C R, Dr. Thomas Pinto, Kiran Holla, EDS Analysis and Mechanical Testing of Alumina and Graphite Particulate Aluminium Metal Matrix Composite , International Conference on Advances in Mechanical Sciences(ICAMS-2017), Malnad college of Engg., Hassan, March 3rd to 5th 2017
  • 9. Lokesh K.S, Dr.Thomas Pinto, Arjun Kumar, Chetan.G, Pranav.S, Prathibha, Comparative Study on Tensile behaviour of E-glass (woven & chopped) Fibre Reinforced with Epoxy Composites, International Conference on Advances in Mechanical Sciences(ICAMS-2017), Malnad college of Engg., Hassan, March 3rd to 5th 2017
  • Thomas Pinto, Centralized Smart Road Transport Automation Using Radio Communication And Identification, International Journal & Magazine of Engineering, Technology, Management and Research, vol.2,Issue No. 6, June 2015, pp.303-305
  • Thomas Pinto, Bi-Directional control of Three Stage Induction Motor Used in Industries to Drive Conveyor Belt, International Journal for Scientific Research & Development, vol. 3, Issue. 7, Sept 2015,
  • Thomas Pinto, Automation of Stator Insulation Process in Alternator Manufacturing Industries, International journal of science, engineering and technology research, vol. 3, Issue. 6, June 2014, pp. 1801-1810.
  • Mr. Rudresh Gowda K.G, Dr. Thomas Pinto, Development and Interfacing of Quick Change Robot for Tool Change Between Two CNC Machine and Reduction of Tool Changing Time, International Journal of Engineering Trends and Technology – Volume X Issue Y- Month 2016
  • Palayat Roshen Hemanth, Thomas Pinto, Automation of an Industrial Grade Steam Generation System Using GSM Technology, International Journal of Engineering Trends and Technology – Volume X Issue Y- Month 2016
  • Dr. Thomas Pinto Innovative and Best Practices in Teaching-Learning Process of Higher Education – A Case of Technical Education,
  • Shahsank S, Dr. Thomas Pinto, Mahendra S B, Comparative Study on Casting Pattern Using Conventional Method and Rapid Prototyping, International Journal of Engineering Trends and Technology – Volume X Issue Y- Month 2016
  • Naveen C R, Dr. Thomas Pinto, Machanability of Hybrid Metal Matrix Composites- A Review , International Journal of Engineering Trends and Technology – Volume X Issue Y- Month 2016
  • Nithin Joshuva, Dr. Thomas Pinto, A Study on Analysis of Condition Based Maintainance for General Purpose Machineries for Fault Diagnostics, A Review, International Journal of Engineering Trends and Technology ,Volume X Issue Y- Month 2016
  • Naveen C R, Dr. Thomas Pinto, Ranganath Y H, Production & Characterization of As Cast and Heat Treated Al2024/SiC/Gr Hybrid Metal Matrix Composites, International Journal of———– – Volume X Issue Y, Month 2017
  • Naveen C R, Dr. Thomas Pinto, Kiran Holla, EDS Analysis and Mechanical Testing of Alumina and Graphite Particulate Aluminium Metal Matrix Composite,International Journal of——— – Volume X Issue Y, Month, 2017
  • Vinayaka Kannantha, Dr. Thomas Pinto, Darshith S, Lokesh K.S, A Review on Concepts of JIT, Lean Manufacturing, Agile Manufacturing and TQM , Abhiyantrika, Vol.1, Issue 1, Jan.2017
  • 17. Lokesh K.S, Dr.Thomas Pinto, Arjun Kumar, Chetan.G, Pranav.S, Prathibha, Comparative Study on Tensile behaviour of E-glass (woven & chopped) Fibre Reinforced with Epoxy Composites, International Journal of——— – Volume X Issue Y, Month, 2017
  • 18. Lokesh K.S, Dr.Thomas Pinto, Dr. Ramachandra C.G, Effect Of Tool Wear & Machinability Studies On Polymer Composites- A Reveiew, International Journal Of Engineering And Information Systems, vol.1, issue5, july-2017, pp.71-77
  • Faculty Name: Dr.Shankar K S, Professor

Before joining SIT

  • Nayak Vighnesha, K. S. Shankar, P. Dinesha & P. Mohanan (2017): Cycle by cycle variations of LPG-gasoline dual fuel on a multi-cylinder MPFI gasoline engine, Biofuels, DOI:
  • 10.1080/17597269.2017.1302669
  • Vighnesha Nayak, K. S. Shankar, P. Dinesha & P. Mohanan (2017), “An experimental investigation on performance and emission parameters of a multicylinder SI engine with gasoline–LPG dual fuel mode of operation”, Biofuels, Vol 8(1), DOI:10.1080/17597269.2016.1211396, pp. 113-123.
  • K Rahul Pai, Dr.Shankar K. S, (2016), “A Review on Hydrodynamic Cavitation as a Technology for Biodiesel Production”, International Journal of Engineering Trends and Technology, ISSN: 2231-5381, pp: 279-283. http://ijettjournal.org/special-issues/ncames-number-2
  • P. Dinesha, Vighnesha Nayak, K.S. Shankar, P. Mohanan (March 2015), “Studies on the environmental emission and performance of a single cylinder CI engine with enhanced intake air oxygen combustion”, Biofuels , Vol,5(6), DOI:10.1080/17597269.2015.1016374, pp.1-9.
  • Shankar K. S, Mohanan P (Jul. 2011), “MPFI gasoline engine combustion, performance and emission characteristics with LPG injection”, International Journal of Energy and Environment (IJEE), Volume 2, Issue 4, 2011, pp.761-770.
  • http://www.ijee.ieefoundation.org/vol2/issue4/IJEE_18_v2n4.pdf
  • Shankar K. S, Mohanan P (Dec. 2010), “The effect of LPG injection on Combustion, Performance and Emission Characteristics of a MPFI Engine”, Journal of Middle European Construction and Design of CArs (MECCA), No. 3+4, Dec 2010, Vol. VIII, pp. 40-48.
  • http://www.bozek.cvut.cz/mecca/2010/34_10-shankar-en.pdf
  • Vighnesha Nayak, Shankar K. S, Dinesha P., Mohanan P (July 2015), “Performance and Emission Characteristics of LPG-Gasoline Dual Fuel on A Multi-Cylinder MPFI Gasoline Engine”, Proceedings of 10th Asia-Pacific Conference on Combustion, Beijing, China, July 19 – 22, 2015, Paper # 173.
  • Shankar K. S, Mohanan P (May 2013), “Performance and Emission Studies of a LPG Fueled Spark Ignition Engine with Steam Induction”, Proceedings of 9th Asia-Pacific Conference on Combustion, Gyeongju Hilton, Gyeongju, Korea, 19-22 May 2013, Session 38.
  • Shankar K. S, Mohanan P (Feb. 2013), “Combustion and emission studies of a LPG fueled spark ignition engine with steam induction”, Proceedings of the International Conference on Alternative Fuels for I. C. Engines, MNIT, Jaipur, India, 6-8 February, 2013, pp.86-91.
  • Bhimao Patil, Vighnesha Nayak, Shankar K. S, Mohanan P, (Feb. 2013), “Performance and emission characteristics of MPFI multi-cylinder gasoline engine using LPG with vaporized water methanol induction”, Proceedings of the International conference on Alternative Fuels for I.C Engines (ICAFICE 2013), Malaviya National Institute of Technology Jaipur Rajasthan, India, 6th-8th Feb. 2013, pp. 331-336.
  • Harish Kumar, K. Pruthviraj Jois, Prashanth Pai M, Chandrakanth V Pujar, Shankar K. S (Jan. 2012), “Engine Performance Studies with Diesel Vapour Induction in a Stationary Diesel Engine”, Proceedings of the Golden Jubilee International Conference on Recent Advances and Challenges in Energy-2012 (RACE-2012), Manipal Institute of Technology, Manipal, Karnataka, India, January 4th–6th, 2012, ISSN 0974-5904, Volume 05 No 01 SPL, pp 182-187.
  • Prashanth Pai M, Prabhuswamy M S, Chandrakant V Pujar, Shankar K. S (May 2011), “Failure Data Analysis and Preventive Maintenance of Three Roll Calendar in a Tyre Industry”, Proceedings of the International Conference on Emerging Trends in Engineering (ICETE-11), NMAM Institute of Technology, Nitte, Karnataka, India, 4th-5th May 2011, ISBN: 978-93-81195-07-9, pp. 743-747.
  • Shankar K. S, Vishal A. S, Mohanan P (Dec. 2010), “MPFI Gasoline Engine Performance and Emission Characteristics with LPG Injection”, Proceedings of the 8th Asia Pacific Conference on Combustion (8th ASPACC), Hyderabad, India, Sl. No. 213, p. 340; (pp.1390-1397 in CD)
  • Natesh M, Shankar K. S, Suresh Kumar Y, Mohanan P (Dec. 2010), “Experimental Analysis of Diesel Vapour Induction on Four Stroke Single Cylinder C.I.Engine”, Proceedings of the 8th Asia Pacific Conference on Combustion (8th ASPACC), Hyderabad, India, Sl. No. 88, p. 169; (pp.520-529 in CD).
  • Prakash H Jadhav, George Varghese, Shankar K. S, Mohanan P (Dec. 2010) “Analysis of A C.I Engine Fuelled With WCO Biodiesel Oxygenated with Diethyl Ether and NOX Reduction Using EGR Technique”, Proceedings of the 8th Asia Pacific Conference on Combustion (8th ASPACC), Hyderabad, India, Sl. No. 159, p. 267; (pp.1024-1029 in CD).
  • Shankar K. S, Mohanan P (May 2010), “Effect of operating variables on the cycle-by-cycle combustion variations and emissions of a multi-cylinder S. I. Engine fueled with blends of gasoline with ethanol”, Proceedings of the International Conference on ‘Frontiers in Mechanical Engineering (FIME 2010), National Institute of Technology Karnataka, Surathkal, Karnataka, India.
  • Shankar K. S, Vijay Desai, Mohanan P (Dec. 2007), “The effect of injection pressure on the performance and emission characteristics of a biodiesel fueled direct injection single cylinder 4-S diesel engine”, Proceedings of the International Conference & XX National Conference on Internal Combustion Engines and Combustion (ICONICE-2007), JNTU, Hyderabad, India, pp. 27-33.
  • Shankar K. S, Vighnesha Nayak, Mohanan P (Oct. 2015), “Analysis of Effect of Steam Induction on the Performance and Emissions of an S.I Engine Fueled with LPG Compared to E20” Proceedings of the 24th National Conference on IC Engines and Combustion (24th NCICEC), University of Petroleum and Energy Studies, Dehradun, Uttarakhand, India, 30th Oct.-1st Nov. 2015, Paper #: UPES/NCICEC/0086
  • Shankar K. S, Vighnesha Nayak, Mohanan P (Dec. 2013), “Experimental study of inlet manifold steam induction on the performance and emissions of a LPG Fueled SI Engine at Wide Open Throttle”, Proceedings of the 23rd National Conference on IC Engines and Combustion (23rd NCICEC) SVNIT-Surat, Gujarat, India, 13th -16th December, 2013, Paper No: 2013NCICEC0121.
  • Vighnesha Nayak, Shankar K. S, Mohanan P (Dec. 2013), “Comparison of Performance and Emission Characteristics on LPG Fueled Multi-cylinder SI Engine with Steam and Water Methanol Induction”, Proceedings of the 23rd National Conference on IC Engines and Combustion (23rd NCICEC) SVNIT-Surat, Gujarat, India, 13th -16th December, 2013, Paper No: 2013NCICEC0111.
  • Naik Nithesh, Naveen B. T, Prashanth Pai M, Shankar K. S, C V Pujar, (March 2012), “Development and Characterization of Biofibres Sandwich Structure”, Proceedings of the National Conference on Emerging Trends in Materials for Advanced Technology (NETMAT) K.V.G College of Engineering, Kurunjibhag, Sullia, Karnataka, March 20-21, 2012, Page 18.
  • Shankar K. S, Vighnesha Nayak, Mohanan P (Dec. 2011), “Performance and Emission Characteristics of a MPFI Engine with E15, E20 and LPG Injection”, Proceedings of the 22nd National Conference on IC Engines and Combustion (22nd NCICEC) NIT-Calicut, Kerala, India, 10th -13th December, 2011, Paper No: 1-030, pp. 109-115.
  • Shankar K. S, G. N. Kumar , Mohanan P (Dec. 2011), “Experimental Analysis of Single Cylinder C.I Engine with Diesel Vapour Induction and EGR”, Proceedings of the 22nd National Conference on IC Engines and Combustion (22nd NCICEC) NIT-Calicut, Kerala, India, 10th -13th December, 2011, Paper No: 1-024, pp. 59-65.
  • Vighnesha Nayak, Shankar K. S, Suresh Kumar Y , Mohanan P (Dec. 2011), “Performance analysis and emission characteristics of LPG injected MPFI four cylinder petrol engine using steam induction”, Proceedings of the 22nd National Conference on IC Engines and Combustion (22nd NCICEC) NIT-Calicut, Kerala, India, 10th -13th December, 2011, Paper No: 1-029, pp. 157-162.
  • Prashanth Pai M, Shankar K. S, Chandrakant V Pujar, Prajwal, Faheem Mukthar (Oct. 2011) , “Preventive Maintenance of Critical Machines”, Proceedings of the National Conference on Modern Trends in Science and Technology (MTST-’11), Dr. M.V. Shetty Institute of Technology, Moodbidri, Karnataka, 14th-15th October 2011, pp 40.
  • Prashanth Pai M, Shankar K. S, Chandrakant V Pujar, Mohammed Yaasir, Muhammed Thazim G (Oct. 2011), “Condition Monitoring of Rolling Element Bearings in a Critical Machine”, Proceedings of the National Conference on Modern Trends in Science and Technology (MTST-’11), Dr. M.V. Shetty Institute of Technology, Moodbidri, Karnataka, 14th-15th October 2011, pp 34.
  • Shankar K. S, Vighnesha Nayak, George Varghese, Mohanan P (May 2011), “MPFI Gasoline Engine Performance and Emission Characteristics with Ethanol-Gasoline Blends and LPG Injection”, Proceedings of the National Conference on Recent Trends in Alternate Sources of Energy and Pollution Control (RASE),KVG College of Engg., Sullia Karnataka, 13th & 14th May 2011.
  • Shankar K. S, Haridas Rathod, Mohanan P (Dec. 2009), “Cyclic combustion variations of a multi-cylinder S.I. engine fueled with blends of gasoline with ethanol”, Proceedings of the XXI National Conference on Internal Combustion Engines and Combustion (20th NCICEC), BIET, Davangere, Karnataka, India, pp. 137-142.
  • Shankar K. S, Raghavendra Bhat B, Sudhir C. V, Mohanan P (Dec. 2005) “Effect of blend ratios of Coconut Methyl Ester & Diesel on the performance and emissions of I. C engine”, Proceedings of the 19th National Conference on Internal Combustion Engines and Combustion (19th NCICEC), Annamalai University, Chidambaram, Tamilnadu, India, pp. 59-63.
  • Sudhir C. V, Raghavendra Bhat B, Shankar K. S, Mohanan P (Dec. 2005), “Experimental investigations on the performance and emission characteristics of a C.I Engine with blends of esterified sunflower oil”, Proceedings of National Conference Recent Advances in Mechanical Engineering (README’ 05), P. A .College of Engineering, Mangalore, Karnataka, India, p. 16.

After Joining Sit

  • Shankar K. S, Vighnesha Nayak, Mohanan P (Dec. 2017), “Combustion analysis of LPG along with steam induction compared with E20 in a MPFI engine”, 25th National Conference on IC Engines and Combustion (25th NCICEC) NITK Surathkal, India. (Paper submitted)
  • Faculty Name : Ravinarayana Bhat N., Associate Professor

Before joining SIT: Nil

After joining SIT:

  • Sudesh Bekal, Ravinarayana Bhat N, “ Bio-lubricant as an Alternative to Mineral oil for CI Engine – An Experimental Investigation with Pongamia Oil as Lubricant”, Energy Sources, Part A: Recovery, Utilization, and Environmental Effects, 34:1016–1026, 2012. ISSN: 1556-7036 print/1556-7230 online. DOI: 10.1080/15567031003735303
  • G.Shruti, Ravinarayana Bhat and Gangadhar Sheri, “Performance Evaluation And Optimization of Air Preheater in Thermal Power Plant”, International Journal of Mechanical Engineering & Technology (IJMET).Volume:5,Issue:9, September 2014, Pages:22-30
  • Naresh R and Ravinarayana Bhat N., ” Experimental Investigation Of Heat Transfer On An Inclined Plate Impinged With Cold Air Jet”, International Journal of Science, Engineering and Technology Research (IJSETR), Volume 3, Issue 6, June 2014, pp 1843-1849.
  • Nishanth V Kamat, Sudesh Bekal, Ravinarayan Bhat N., “Use of Multi-hole Nozzle in CI Engine-A Comparison of Efficiency”, Journal of Emerging Technologies and Innovative Research (JETIR) , ISSN-2349-5162, Volume 2, Issue 4, April 2015, pp 1304-1311.
  • Ravinarayana Bhat N, “A Study on the use of Karanja Oil as Lubricant in Compression Ignition Engines”, IJETT, ISSN 2331- 5381, 2016, pp 229-232
  • Ravinarayana Bhat N., “Influence of injector nozzle hole number and size on the performance of a supercharged direct injection diesel engine”, NMAMIT annual research journal, ISSN 2249-0426, December 2016, pp 23-27.
  • Faculty Name: Gangadhara Rao, Associate Professor

Before joining SIT: NILL

After joining SIT:

  • Influince of Injection Pressure On Performance of Simarouba Biodiesel Engine, International Journal of Scientific & Engineering Research,2013, Vol4, Issue 7,pp668-672.
  • Effects of Additives on Biodiesel/Diesel Performance, Emission Characteristics and Properties, International Journal of Engineering Trends and Technology, Special issue NCAMES May 2016, pp-22-27
  • Faculty Name: U Narayana Baipadithaya, Associate Professor

Before joining SIT: NILL

After joining SIT:

  • SERVQUAL ANALYSIS ON A TECHNICAL INSTITUTION – a case study U,N,Baipadithaya , Dr. Subrahmaya Bhat , Dr. Rashmi Kodikal IJETT-MAY-2016,P-ISSN:2349-0918
  • Faculty Name : Sandesh M Prabhu., Associate Professor

Before joining SIT:

  • Paper titled “ Heat treatment and Mechanical characterisation of dual phase (ferrite-martensite) medium carbon low alloy steels” published in International Journal for Technological Research in Engineering – volume 3, issue 8, April 2016

After joining SIT: Nill

  • Faculty Name : Mohammed Gowspeer., Assistant Professor

Before joining SIT: Nill

After joining SIT:

  • Stress analysis of circumferential splice joint and prediction of life to crack initiation published in “National conference on advances in Mechanical Engg. Science (NCAMES-2016)
  • Faculty Name: Mr. Shankara Murthy H M

Before Joining SIT

Shankara Murthy.H.M1, Madhukeshwara.N2, S.Kumarappa3, “Assessment of boundary layer flow modelling approaches in computational fluid dynamics for compressible external aerodynamics using NACA-64618 Airfoil”, International Journal of Innovative Research in Science, Engineering and Technology, ISSN: 2319-8753, Vol. 2, Issue 7, July 2013

After Joining SIT

  • Shankara Murthy.H.M1, Dr. Ramakrishna.N.Hegde2, “A critical review of combined augmentation techniques used for heat transfer enhancement in heat exchangers”, National Conference on Advances in Mechanical Engineering Science (NCAMES-2016), ISSN: 2231-5381, 268-274.
  • Ramakrishna N.Hegde1, Shankara Murthy.H.M2, “Heat Transfer Augmentation of Double Tube Heat Exchanger with Twisted Tape Inserts and AL2O3/Water Nanofluid: An Experimental Study and Correlation Development” (communicating).
  • Faculty Name: Mr. Lokesh K S

Before Joining SIT: Nill

After Joining SIT:

  • Published Paper in International Journal of Engineering &Information Systems, ISSN: 2000-000X, Vol.1, Issue 05, july-2017,Effect of tool wear & machinability studies on polymer composites; A Review
  • Published Paper in International Journal of Engineering &Information Systems, ISSN: 2000-000X, Vol.1, Issue 04, june-2017, Evaluation of Mechanical Properties and Wear Characterization of Polymer Composites under Varying Temperature Conditions: A Review
  • Published paper in International Journal of Science and Research (IJSR), volume 06, Issue 05, May-2017 with paper entitled “A Review on methods of extraction of various kinds of bio-fuels”.
  • Published Paper in International Journal of Engineering &Information Systems, ISSN: 2000-000X, Vol.1, Issue 02, April-2017. Experimental Investigation of Flexural Strength of E-glass/epoxy Composites.
  • Published paper in International Journal of Engineering sciences & Research Technology, ISSN: 2277-9655, ICAMES-2017 with paper entitled Comparative study on Tensile behavior of E-glass (woven & chopped) fibers reinforced with Epoxy composite.
  • Published paper in International Journal of Engineering Trends and Technology, ISSN: 2231-5381,NCAMES-2016 with paper entitled Effect of E-waste filler on tensile and flexural behavior of E-glass/Epoxy composites.
  • Published paper in International Journal of Engineering Trends and Technology, ISSN: 2231-5381,NCAMES-2016 with paper entitled Fabrication of Semi Automatic Feeding Mechanism for Small Scale Poultry Farm.
  • Published paper in International Journal of Engineering Trends and Technology, ISSN: 2231-5381, NCAMES-2016 with paper entitled CFD Simulation of Centrifugal Blower Using ANSYS CFX.
  • Published paper in International Journal of Engineering Trends and Technology, ISSN: 2231-5381,NCAMES-2016 with paper entitled Review on Experimental Analysis of Pulse Detonation Engine and Its Merits.
  • Published paper in Shiv Rudraksha International Journal of Advanced Research in Engineering and Management (SRIJAREM), Volume 1, Issue 2,January 2016 with paper entitled A Review on Tribological study and Mechanical Charecterization of E-glass/Epoxy Composites.
  • Published paper in International Journal of Engineering Research and Technology (IJERT), Volume 3, Issue 17,NCERAME-2015 with paper entitled Effect of Oxygenated Fuel on Performance & Emission Characteristics of Diesel Engine.
  • Published paper in International Journal of Research in Engineering and Science (IJRES), Volume 3, Issue 2,Feb-2015 with paper entitled Experimental Evaluation of effect of filler on tensile behavior of E- glass/epoxy composites
  • Faculty Name: Mr. Shashank S, Assistant Professor

Before Joining SIT: NIL

After joining SIT:

  • “Design and development of milling attachment for CNC TURNING CENTER” National conference on advances in Mechanical Engineering Sciences,NCAMES-2016 on 6th May, 2016 at S.I.T Mangaluru.ISSN:2231-5381
  • “Comparative study on casting pattern using Conventional Method and Rapid Prototyping” National conference on advances in Mechanical Engineering Sciences,NCAMES-2016 on 6th May, 2016 at S.I.T Mangaluru. ISSN:2231-5381
  • “Study of sound Pressure Level, Design and development of Noise Attenuation of Blanket” National conference on advances in Mechanical Engineering Sciences,NCAMES-2016 on 6th May, 2016 at S.I.T Mangaluru.ISSN:2231-5381.
  • Faculty Name: Ravi S.M. Assistant Professor

Before joining SIT:

  • “Effect of Oxygenated Fuel on Performance & Emission Characteristics of Diesel Engine” International Conference on Advanced Materials, Manufacturing, Management & Thermal Sciences on May 3rd& 4th, 2013 at S.I.T, Tumkur

After joining SIT:

  • Effect of Oxygenated Fuel on Performance & Emission Characteristics of Diesel Engine” in NCERAME-2015, IJERT conference proceeding, volume 3, Issue 17, REVA Institute of Technology and Management, Bangalore – 560 064 on March 27th& 28th, 2015 at R.I.T, Bengaluru.
  • “Analysis of technical and financial systems to improve function of repairs and maintenance system and reduce costs of organization” Published in SRIJAREM Journal, Volume 1 – Issue 2, January 2016
  • “Investigation on Effect of Oxygenated Additive on single cylinder Diesel Engine Performance and Emission Characteristics” National Conference on Advances in Mechanical Engineering Sciences,NCAMES-2016, on 6th May, 2016 at S.I.T Mangaluru.ISSN: 2231-5381
  • “A Review on Methods of Extraction of Various Kinds of Bio-Fuels” in International Journal of Science and Research (IJSR), Volume 6 Issue 5, May 2017, paper ID: ART20171121, ISSN: 2319-7064
  • “A Deterministic behavior of Globally Asynchronous Locally Synchronous Microprocessor Architecture” in International Journal of Application or Innovation in Engineering & Management (IJAIEM), Paper Id: IJAIEM-2017-06-30-73, Volume 6, Issue 6, June 2017, ISSN 2319 – 4847
  • “A Deterministic behavior of Globally Asynchronous Locally Synchronous Microprocessor Architecture” in National & International Editorial board and the Expert review committee of IJAETMAS Paper Id: IJ17M0713, V0LUME-4, June 2017, ISSUE-7, ISSN: 2349-3224
  • “Evaluation of Mechanical Properties and Wear Characterization of Polymer Composites under Varying Temperature Conditions: A Review” in International Journal of Engineering and Information Systems (IJEAIS), Vol. 1 Issue 4, June– 2017, ISSN: 2000-000X
  • Faculty Name: Yashawantha K M, Department of Mechanical Engineering.

After joining SIT

  • J. Pasha, M. K. Ramis, and K. M. Yashawantha, “The Effect of Sonication Time on Alumina Nanofluids with Paradoxical Behavior,” Nano Trends A J. Nanotechnol. Its Appl., vol. 16, no. 3, pp. 31–40, 2014.
  • Faculty name: Sathyaprakash A, Assistant Professor

Before joining SIT:

  • Published and Presented Review Paper titled “Hybrid Energy System(HES) for fulfilling Energy need of 21st Century: A review” in Proceedings of NATIONAL CONFERENCE ON RENEWABLE ENARGY SYSTEMS AND ENGINEERING” at Vivekananda College of Engineering and Technology on 7th and 8th Nov 2014. Page no.115-117 ISBN : 978-93-5196-379-0
  • Published and Presented Research Paper titled “Hybrid Damping Property in Sand Cast Al-Si LM28 Alloy” in Proceedings of “ Terends and Innovation in Automation, Materials and Thermal Engineering(TIAMTE-2015) at VTU Belagavi/ Visvesaraya Technological University, Mysuru 570029
  • Published Research Paper Titled “Effect on mechanical efficiency in CI engine for the Cashew Nut Shell oil blended fuel” in Proceedings of NATIONAL CONFERENCE ON RENEWABLE ENARGY SYSTEMS AND ENGINEERING” at Vivekananda College of Engineering and Technology on 7th and 8th Nov 2014. Page no.123-125 ISBN : 978-93-5196-379-0
  • Published and Presented Research Paper titled “Study on compaction behavior in hypoeutectic, eutectic & hypereutectic al-si alloys for the powder metallurgy process ” in Proceedings of “ Terends and Innovation in Automation, Materials and Thermal Engineering(TIAMTE-2015) at VTU Belagavi/ Visvesaraya Technological University, Mysuru 570029

After Joining SIT:

  • Presented Paper on “ Comparison of damping property in sand cast Al-Si alloy” in National Conference on Advances in Mechanical engineering NCAMES-2016
  • Presented Paper on “ A study on Manufacturing Culture in Small and Micro Industry in India” in National Conference on advances in mechanical engineering NCAMES-2016
  • Presented Paper on “ Crank Movement and Gap Analysis of Connecting Rod in Semi-Automated Crank Action Multi Die Noodle making machine by using MATLAB” in National Conference on advances in mechanical engineering NCAMES-2016
  • Presented Paper on “ Multi die Crank operated Rice Noodle Maker- A New Product Design” in National Conference on advances in mechanical engineering NCAMES-2016
  • Presented Paper on “ Compression Behaviour of Al6061/Al2O3/Graphite hybrid composite material” in National Conference on advances in mechanical engineering NCAMES-2016
  • Published and Presented Research Paper titled “Influence of silicon on cold compaction behaviour of hyper eutectic al-si alloys” in Proceedings of “ Terends and Innovation in Automation, Materials and Thermal Engineering(TIAMTE-2015) at VTU Belagavi/ Visvesaraya Technological University, Mysuru 570029
  • Published research paper in Jnanasangama-2017 A national level conference on “Development of new product hypothesis for thermal desalination unit using industrial exhaust gas”
  • Published research paper in Jnanasangama-2017 A national level conference on “Analysis on composite connecting rod”
  • Faculty Name: Mr. Vasudeva Bhat P, Assistant professor

Before Joining SIT

  • Vasudeva Bhat, B Vishwash, Rounaq Ahmed and Melwyn R Castelino,” ARTIFICIAL NEURAL NETWORK BASED GEAR FAULT DIAGNOSIS USING VIBRATION SIGNAL: A COMPARISON OF FEATURE EXTRACTION TECHNIQUES”, International Conference on Emerging Trends in Engineering (ICETE)-2015, NMAMIT, Nitte, Udupi, Karnataka, India, ISBN: 978-93-84935-30-6.
  • Vasudeva Bhat, Srinivasa Pai P and Rounaq Ahmed ” GEAR FAULT DIAGNOSIS USING HOELDER EXPONENT”, Jnanasangama-2015 National Conference VCET, Puttur, ISBN: 978-81-930416-1-1.
  • Mahesh B Davangeri, Vinay B U& Vasudeva Bhat,” DEVELOPMENT AND EVALUATION OF MECHANICAL PROPERTIES OF ASBESTOS POWDER FILLED EPOXY/GLASS COMPOSITE”, International journal of Metallurgical and Material science and Engineering(IJMMSE) ISSN(P):2278-2516; ISSN(E):2278-2524.volume 4, issue1(2014).

After joining SIT

  • Puneet N P, Vasudeva Bhat P , Sohan P P, Sudarshan K,” Optimization of surface roughness and flank wear of AISI 304 stainless steel in CNC turning”, Journal of Materials Science & Surface Engineering, 5(6): 657-660 ISSN (Online): 2348-8956; 10.jmsse/2348-8956/5-6.4
  • Vasudeva Bhat P, Puneet N P, Sohan P P, Sonik B, “ Optimization of flank wear and cutting zone temperature of AISI 4340 steel in CNC turning”, International Conference on Adavances in Mechanical Engineering Sciences- April 2017, PES college of Engineering Mandya.
  • Vasudeva Bhat P, Puneet N P, Akshay kumar B V, “ EVALUATION OF CUTTING ZONE TEMPERATURE IN TURNING OF AISI 4340 STEEL USING VARIOUS TOOL INSERTS”, National Conference on advances in mechanical Engineering and science –May(2016), SIT, Valachil, Mangalore.
  • Puneet N P, Vasudeva Bhat P, Junaid Abdulla M, “A FLANK WEAR ANALYSIS IN TURNING OF EN8 STEEL FOR DIFFERENT TOOL INSERTS”, National Conference on advances in mechanical Engineering and science –May(2016), SIT, Valachil, Mangalore.
  • Rounaq Ahmed, Amit Anil Deshpande, Vasudeva Bhat, “GEAR FAULT DETECTION USING VIBRATION SIGNAL ANALYSIS AND CONTINUOUS WAVELET TRANSFORM”, National Conference on Condition Monitoring -October 2015
  • Faculty Name: Mr. Vinayaka Kannantha, Assistant professor

Before Joining SIT

  • Vinayaka Kannantha, Dr. Ramachandra C G , Dr. T R Srinivas, “Automatic distance measurement and breaking for automobile / AVG using ultrasonic waves and accident detection by GSM”, IJETT, ISSN: 2231- 5381.

After joining SIT

  • Uploaded a Munual script on “First pass yeild improvement in fuel injection pump ( pf -33) delivery valve assembly”, by Vinayaka Kannantha, Dr. C G Ramachandra, Lokesh K S, in International Journal on thermal science and international journal on Mechanical Engineering from Elsevier.
  • Lokesh K S, Vinayaka Kannantha, “ Effect of tool wear and manchinability studies on ploymer composite; A review, IJEIS , ISSN: 2000- 000X, volume 1, issue 04 , July 2017.

Department of Mechanical Engineering (II Shift)

  • Faculty name: Dr. Ramachandra C G B.E, M-Tech, Ph.D, MIE, MISTE, MSSRJ, P.Eng, FSET(Malaysia)

FISME, MIAENG, MSSI, MISSE, MIIER, MICSR

Publications- Before Joining SIT

National Conference – Papers Presented

  • Ramachandra C G and Rishi J P, “Recent Trends in Condition Monitoring of Machinery”, AICTE sponsored National Conference, NMAMIT Nitte, 21st and 22nd March 2002.
  • Ramachandra C G and Rishi J P, “Recent Trends in Condition Monitoring of Machinery”, AICTE sponsored National Conference, NMAMIT Nitte, 21st and 22nd March 2002
  • Ramachandra C G and Rishi J P, “Recent Trends in Condition Monitoring of Machinery”, AICTE sponsored National Conference, NMAMIT Nitte, 21st and 22nd March 2002

Publications-After Joining SIT

International Journal – Papers Published

  • C.G. Ramachandra and T.R.Srinivas, “Maintenance Management Information System Used in Maintaining the Maintenance Activities of a Board Manufacturing Industry”, International Journal of Industrial Engineering and Technology (IJIET) ISSN 0974-3146,International Research Publication House, Volume 3, Number 2, July-December 2011, Page No. 163-172.
  • Ramachandra C G and T.R.Srinivas, “Acceptance and Usage of Management Information System in Small Scale and Medium to Large Scale Industries”, Advances in Engineering Science and Management, ISBN: 978-1-4673-0213-5,IEEE Explorer – March 2012, Page No. 31-35.
  • Ramachandra C G and T.R.Srinivas, “Acceptance and Usage of Management Information System (MIS) in Small Scale Industries”, International Journal of Research in Commerce & Management (IJRCM) ISSN 2231-5756, Volume 2, Issue 3, March-2012, Page No. 78-82.
  • Ramachandra C G and T.R.Srinivas, “Study On Usage Of Management Information System (MIS) In Medium Scale Industries”, International Journal of Business Research and Manufacturing Management(IJBRMM),ISSN 2231-5439 Business Management Research (BMR), Volume 2, Number 1, April-2012, Page No. 21-26.
  • Ramachandra C G and T.R.Srinivas, “Comparative Study on usage of Management Information System (MIS) in Small Scale and Medium Scale Industries in India”, International Journal of Management Research and Technology (IJMRT), ISSN 0974-3502, Serials Publications, Volume 6, Number 2, July-December 2012, Page No. 165-174.
  • Ramachandra C G and T.R.Srinivas, “Management Information System (MIS) applied to Small Scale Industries”, International Journal of Business Research and Manufacturing Management (IJBRMM) ISSN 2231-5349 (Online) Business Management Research (BMR), Volume 2, Number 3, October-2012, Page No. 01-07.
  • Ramachandra C G and T.R.Srinivas, “Management information system applied to mechanical department of an engineering college”, International Journal of Research in Commerce & Management (IJRCM) ISSN 2231-5756 Volume 2, Issue 11, November-2012, Page No. 21-26.
  • Ramachandra C G and T.R.Srinivas, “Case Study on Comparison of Usage and Acceptance of Management Information System (MIS) in Medium Scale and Large Scale Organizations”, International Journal of Engineering, Science and Innovative Technology (IJESIT) ISSN: 2319-5967 Volume 1, Issue 2, November-2012, Page No. 125-134.
  • Ramachandra C G and T.R.Srinivas, “A Study on Development and Implementation of a Computerized Maintenance Management Information System for a Process Industry”, International Journal of Engineering and Innovative Technology (IJEIT)ISSN: 2277-3754 Volume 2, Issue 5, November-2012, Page No. 93-99.
  • Ramachandra C G and Vaishak N L, ”Development of ARM Based embedded system for robot application” International Journal of Engineering Science and Innovative Technology (IJESIT) ISSN: 2319-5967 Volume 1, Issue 2, November 2012
  • Ramachandra C G and Vaishak N L, “Embedded Robot Control System based on an Embedded Operating System, the Combination of RISC Microprocessor, DSP & ARM Linux”, International Journal of Engineering and Innovative Technology (IJEIT)ISSN: 2277-3754 Volume 2, Issue 6, December-2012. Page No. 143-147.
  • Ramachandra C G and T.R.Srinivas, “A Study on usage of Management Information System (MIS) in Medium to Large Scale Industries”, International Journal on Recent Trends in Engineering and Technology (IJRTET), ISSN 2158-5563 (Online) ISSN 2158-5555 (Print), Association of Computer Electronics and Electrical Engineers (ACEEE), Vol. 8, No. 1 January-2013, Page No. 60-63.
  • Ramachandra C G and Rizawan N Shaikh, “Prototype Model of Multi-load AGV for Material Supply in Manufacturing System”, International Journal of Inventive Engineering and Sciences (IJIES), ISSN: 2319-9598 Volume 1, Issue 8, July 2013. Page No. 01-05.
  • Ramachandra C G, Sharun Mendonca and John Paul Vas, “Influence of injection pressure on performance of Simarouba biodiesel engine”, International Journal of scientific and engineering research (IJSER) ISSN 2229-5518 volume 4, issue 7, July 2013, Page No. 668-672.
  • Ramachandra C G and Vaishak N L, “Based on the Combination of Advanced RISC Machines and ARM-Linux Development of ArM based Embedded System for Robot Applications”, International Journal of Science, Engineering and Technology Research (IJSETR) ISSN: 2278-7798 Volume 2, Issue 7, July-2013, Page No. 1469-1474.
  • Ramachandra C G and Vaishak N L, “Embedded Robot Control System using ARM for Robot Application”, Research & Technology In The Coming Decades (CRT-2013) ISBN: 978-1-84919-868-4, IEEE Explorer – Sept 2013, Page No. 01-05.
  • Ramachandra C G and T.R.Srinivas, “Design, Development and Implementation of Computerized Maintenance Management Information System (CMMIS) for a Selected Medium Scale Industry”, International Journal of Science, Engineering and Technology Research (IJSETR) ISSN: 2278-7798, Volume 2, Issue 8, August-2013, Page No. 1634-1643.
  • Ramachandra C G and T.R.Srinivas, “Application Of Computerized Management Information System(CMIS) For A Paint Manufacturing Industry”, International Journal of Advances in Engineering Research (IJAER) ISSN: 2231–5152 Volume-6, Issue-3, Sept-2013, Page No. 01-12.
  • Ramachandra C G and Rohini M, “Optimization of Process Parameters For The Production of LH Channel Using CNC Milling”, International Journal of Advances in Engineering Research (IJAER) ISSN: 2231–5152 Volume-6, Issue-4, Oct-2013, Page No. 01-10.
  • Ramachandra C G and Adarsh Kumar H K, “GPS Based Remote Black Box for Airborne Vehicles”, International Journal of Advances in Engineering Research (IJAER) ISSN: 2231–5152 Volume-6, Issue-4, Oct-2013, Page No. 11-25.
  • Ramachandra C G and Krishna Pavana, “Design and Fabrication of Automotive Hydraulic Jack System for Vehicles”, International Journal of Advances in Engineering Research (IJAER) ISSN: 2231–5152 Volume-6, Issue-4, Oct-2013, Page No. 26-39.
  • Ramachandra C G and Rishi J P, “A Study On Implementation Of Lean Manufacturing Practices For An Automobile Industry”, International Journal of Advances in Engineering Research (IJAER) ISSN: 2231–5152 Volume-7, Issue-1, Jan-2014, Page No. 01-09.
  • Ramachandra C G and T.R.Srinivas, “A Survey Conducted to Analyze the Factors Influences the Non-Usage of Management Information System (MIS) in Selected Large Scale Industries” International Journal ELSEViER ISBN: 2978-93-5107-222-5 March-2014.
  • Ramachandra C G and Shruthi Y C, “Productivity Improvement of Castings, Switching to Shell Mould Process from Green Sand Mould Process”, International Journal of Research in Engineering and Technology (IJRET), eISSN: 2319-1163, pISSN: 2321-7308, Volume-3, Issue-5, May 2014, Page No. 594-598.
  • Ramachandra C G and Aaron Christopher Monis, “Automated CVD Reactor Cleaning System Using Relay”, International Journal of Science, Engineering and Technology Research (IJSETR) ISSN: 2278–7798 Volume-3, Issue-6, June-2014, Page No. 1764-1771.
  • Dr. Ramachandra C G and Srinath Pai, “Study of Fuel Injection Pressure and Injection Timing Effect on A Diesel Engine Performance And Emission”, International Journal of Research in Science And Technology (IJRST) ISSN: 2249–0604 Volume-4, Issue-3, July-Sept 2014, Page No. 71-80
  • Dr. Ramachandra C G and Manjunatha B, “Waste Minimization Initiatives and Energy Conservation in Hotel Industries”, International Journal of Research in Science And Technology (IJRST) ISSN: 2249–0604 Volume-4, Issue-3, July-Sept 2014, Page No. 81-89.
  • Dr. Ramachandra C G and T.R.Srinivas, “Condition Monitoring Of Dump Mill Of A Banbury Machine”, International Journal of Advances in Engineering Research (IJAER) ISSN: 2231–5152 Volume-9, Issue-1, Jan-2015, Page No. 32-39.
  • Dr. Ramachandra C G and Shruthi Y C, “Improvement In Productivity Of Castings By Switching From Green Sand Mould Process To Shell Mould Process”, International Journal of Advances in Engineering Research (IJAER) ISSN: 2231–5152 Volume-9, Issue-2, Feb-2015, Page No. 01-11
  • Dr. Ramachandra C G and Sandesh Hegde, “Cost Optimization Of Heating Ventilation Air Conditioning System (HVAC) By Using Building Management System”, International Journal of Advances in Engineering Research (IJAER) ISSN: 2231–5152 Volume-9, Issue-1, Jan-2015, Page No. 58-68.
  • Dr. Ramachandra C G and T.R.Srinivas, “A Study To Verify The Possible Reasons For The Non-Usage Of Management Information System (MIS) In Selected Medium Scale Industries”, International Journal of Transformations in Business Management (IJTBM) ISSN: 2231–6868 Volume-5, Issue-1, Jan-Mar 2015, Page No. 09-17.
  • Dr. Ramachandra C G and Sandeep Acharya, “Optimization Of Automated Granite Processing Plant”, International Journal of Research in Science And Technology (IJRST) ISSN: 2249–0604 Volume-5, Issue-1, Jan-Mar 2015, Page No. 04-14.
  • Dr. Ramachandra C G and Dr. T.R.Srinivas, “Vibration Monitoring Of Blower In A Tyre Manufacturing Industry”, International Journal of Advances in Engineering Research (IJAER) ISSN: 2231–5152 Volume-9, Issue-3, Mar-2015, Page No. 24-35.
  • Dr. Ramachandra C G and Rohini M, “Design Of CNC Milling Fixture For An Aluminum Aerospace Component”, International Journal of Research in Science And Technology (IJRST) ISSN: 2249–0604 Volume-5, Issue-1, Jan-Mar 2015, Page No. 57-67
  • Dr. Ramachandra C G and Sandesh Hegde, “Heating Ventilation Air Condi- toning System Energy cost optimization by Using Building Management System”, International Journal For Scienti_c Research & Development (IJSRD) ISSN: 2321-0613 Volume No.3 Issue No. 2, April 2015 Page No.2303-2306.
  • Dr. Ramachandra C G and Sandeep Acharya, “Study and Optimization of Granite Processing Plant”, International Journal For Scientific Research & Development (IJSRD) ISSN: 2321-0613 Volume No.3 Issue No. 2, April 2015 Page No.2307-2311.
  • Dr. Ramachandra C G and Sandesh Hegde, “Central Heating Ventilation Air Conditioning System Energy cost optimization”, International Journal For Scientific Research & Development (IJSRD) ISSN: 2321-0613 Volume No.3 Issue No. 2, April 2015 Page No.2312-2316.
  • Dr. Ramachandra C G and Randesh Ramanath Kochrekar, “Design and Development of Multifunctional Robot using Rigid and Flexi-body Concept”, International Journal of Multidisciplinary Research and Modern Education (IJMRME) ISSN (Online): 2454-6119 Volume No.1 Issue No. 1, 2015 Page No.376-383
  • Dr. Ramachandra C G and Manjunatha B, “Ecotel concept for energy conservation & waste reduction in hotel industries”, International Journal of Computer Applications (IJCA) ISSN: 0975-8887, Proceedings on NCPSIA-15, Number.01, December 2015 Page No.22-24
  • Dr. Ramachandra C G and Raghavendra M J, “A Review on Tool Flank Wear Monitoring by Tool Condition Monitoring System using Various Approaches”, Global Research and Development Journal for Engineering (GRDJE) ISSN: 2455-5703 Volume No.1 Issue No. 4, March 2016 Page No.07-13.
  • Dr. Ramachandra C G and Prashanth Pai M, “Effect of Total Productive Maintenance (TPM) Implementation in Manufacturing and Service Industries – A Review”, Proceeding of National Conference on Advances in Mechanical Engineering Science-International Journal of Emerging Trends in Technology (IJETT) ISSN: 2231-5381, May-2016 Page No.346-350.
  • Dr. Ramachandra C G and Raghavendra M J, “A Study on Different Tool Condition Monitoring System Available to Monitor Tool Flank Wear”, Proceeding of National Conference on Advances in Mechanical Engineering Science-International Journal of Emerging Trends in Technology (IJETT) ISSN: 2231-5381, May-2016 Page No.359-364.
  • Dr. Ramachandra C G and Rudresh Gowda K G, “Development of Interfacing of Quick Change Robot for Tool Change between Tow CNC Machines & Reduction of Tool Changing Time”, Proceeding of National Conference on Advances in Mechanical Engineering Science-International Journal of Emerging Trends in Technology (IJETT) ISSN: 2231-5381, May-2016 Page No.380-382.
  • Dr. Ramachandra C G and Sandesh Hegde, “Permanent Magnet Propelled Vertical-Axis Wind Turbine”, Proceeding of National Conference on Advances in Mechanical Engineering Science-International Journal of Emerging Trends in Technology (IJETT) ISSN: 2231-5381, May-2016 Page No.383-386.
  • Dr. Ramachandra C G and Majnunatha Prabhu, “Automatic Quantitative Sorting of Milk Packets on KMF Shimoga Dairy”, Proceeding of National Conference on Advances in Mechanical Engineering Science-International Journal of Emerging Trends in Technology (IJETT) ISSN: 2231-5381, May-2016 Page No.396-398.
  • Dr. Ramachandra C G and Manjunatha B, “Management Information System (MIS) in Hotel Industries to Improve Overall Efficiency”, Proceeding of National Conference on Advances in Mechanical Engineering Science-International Journal of Emerging Trends in Technology (IJETT) ISSN: 2231-5381, May-2016 Page No.399-405.
  • Dr. Ramachandra C G and Palayat Roshen Hemanth, “Automation of an Industrial Grade Steam Generation System using GSM Technology”, Proceeding of National Conference on Advances in Mechanical Engineering Science-International Journal of Emerging Trends in Technology (IJETT) ISSN: 2231-5381, May-2016 Page No.74-76.
  • Dr. Ramachandra C G and Chandrahas Bekal, “Fracture Toughness of Structural Flaw Butt Joint Weld of Low Carbon Steels”, Proceeding of National Conference on Advances in Mechanical Engineering Science-International Journal of Emerging Trends in Technology (IJETT) ISSN: 2231-5381, May-2016 Page No.95-99.
  • Dr. Ramachandra C G and Vinayaka Kannantha, “Permanent Automatic Distance Measurement and Breaking for Automobile/AGV (Automated Guided Vehicle) Using Ultrasonic Waves and Accident Detection by GSM”, Proceeding of National Conference on Advances in Mechanical Engineering Science-International Journal of Emerging Trends in Technology (IJETT) ISSN: 2231-5381, May-2016 Page No.100-103.
  • Dr. Ramachandra C G and Rahul E K, “Automated Railway Signalling and Interlocking System Design Using PLC and SCADA”, Proceeding of National Conference on Advances in Mechanical Engineering Science-International Journal of Emerging Trends in Technology (IJETT) ISSN: 2231-5381, May-2016 Page No.01-05.
  • Dr. Ramachandra C G and Lokesh K S, “Effect of E-Waste Filler on Tensile and Flexural Behavior of E- Glass/Epoxy Composites”, Proceeding of National Conference on Advances in Mechanical Engineering Science-International Journal of Emerging Trends in Technology (IJETT) ISSN: 2231-5381, May-2016 Page No.184-188.
  • Dr. Ramachandra C G and Neetha K, “A Study on Implementation of Total Quality Management (TQM) in Hospital to Improve Service Quality”, Proceeding of National Conference on Advances in Mechanical Engineering Science-International Journal of Emerging Trends in Technology (IJETT) ISSN: 2231-5381, May-2016 Page No.22-25.
  • Dr. Ramachandra C G and Rishi J P, “Keys to Succeed in Implementing Total Preventive Maintenance (TPM) and Lean Strategies”, International Journal for Modern Trends in Science & Technology (IJMTST) ISSN: 2455-3778, Volume No.2 Issue No. 7, July-2016 Page No.25-30.
  • Dr. Ramachandra C G and Rishi J P, “Implementation of Lean Strategies in an Automobile Axle Plant”, International Journal of Engineering Technology, Management & Applied Sciences (IJETMAS) ISSN: 2349-4476, Volume No.4 Issue No. 8, August-2016 Page No.74-81.
  • Dr. Ramachandra C G and Prashanth Pai M, “OEE – A Tool to Measure the Effectiveness of TPM Implementation in Industries – A Review”, Global Research and Development Journal for Engineering (GRDJE) ISSN: 2455-5703 Volume No.1 Issue No. 12, November 2016 Page No.92-96.
  • Dr. Ramachandra C G and Rishi J P, “Implementation of Lean Strategies in an Automobile Axle Plant”, International Journal of Advances in Scientific Research & Engineering (IJASRE) ISSN: 5454-8006, Volume No.2 Issue No. 10, November-2016 Page No.01-07.
  • Dr. Ramachandra C G and Prashanth Pai M, “Optimal Inspection Frequency of a Critical Machine in a Machine Tool Manufacturing Unit”, Journal of Engineering Technological Research (JETR) ISSN: 2229-9262, Volume No.8, March 2017 Page No.179-182.
  • Dr. Ramachandra C G and Raghavenra M J, “Determination of Flak Wear of a PVD Coated Carbide Tool by Condition Monitoring”, Journal of Engineering Technological Research (JETR) ISSN: 2229-9262, Volume No.8, March 2017 Page No.108-113.
  • Dr. Ramachandra C G and Sandesh Hegde, “Efficiency Improvement of the Vertical Axis Wind Turbine by Implementing Permanent Magnet Propelling Phenomena”, Journal of Engineering Technological Research (JETR) ISSN: 2229-9262, Volume No.8, March 2017 Page No.235-238.
  • Dr. Ramachandra C G and Rishi J P, “Development of Framework for Lean Manufacturing Implementation in SMEs”, Journal of Engineering Technological Research (JETR) ISSN: 2229-9262, Volume No.8, March 2017 Page No.243-248.
  • Dr. Ramachandra C G and Prashanth Pai M, “Total Productive Maintenance – A Performance Enhancement Strategy for Manufacturing Industries”, Journal of Engineering Technological Research (JETR) ISSN: 2229-9262, Volume No.8, March 2017 Page No.305-311.
  • Dr. Ramachandra C G and T R Srinivas, “Vibration Monitoring of Thread Line Mill in a Tyre Manufacturing Industry”, Journal of Engineering Technological Research (JETR) ISSN: 2229-9262, Volume No.8, March 2017 Page No.174-178.

National Journal – Papers Published

  • Ramachandra C G and T.R.Srinivas, “Maintenance Management Information System applied to a Process Industry”, Journal of Advances in Mechanical Engineering NAME-10, ISBN 978-81-8424-623-0 pp.480-485 Allied Publishers Pvt. Ltd. New Delhi-2010.
  • Ramachandra C G and T.R.Srinivas, “Computer Aided Maintenance Management Information System for A Tyre Manufacturing Industry”, Proceeding of International Conference on Advances in Manufacturing Technology (ICAMT-2012), June 2012.
  • Ramachandra C G and T.R.Srinivas, “Comparative Study on usage of Management Information System (MIS) in Small Scale and Medium Scale Industries in India”, Proceedings of International Conference on Current Trends in Engineering ICCTEM-2012,ISBN 978-93-5051-905-9, July 2012.
  • Ramachandra C G and Vaishak N. L, “Embedded Robot Control System based on an embedded operating system along with ARM for Robot Application”, Proceeding of International Conference on Control, communication and Computer Technology (ICCCCT), ISBN: 978-93-82208-41-9, 2012, Page no. 34-38.
  • Ramachandra C G and T.R.Srinivas, “A Study to Find Out the Influencing Factors for Non-Usage of Management Information System in Selected Small Scale Industries”, Indian Journal of Mechanical Engineering and Research (IJMER) ISSN: 2223-5329, Vol-1, No-1, Aug-2013.

International Conference – Papers Presented

  • Ramachandra C G and T.R.Srinivas, “Maintenance Management Information System Used in Maintaining the Maintenance Activities of a Process Industry” International Conference on Operational Excellence for Global Competitiveness ICOEGC – 2011, R.V. College of Engineering, Bangalore, 3-5th February 2011.
  • Ramachandra C G and T.R.Srinivas, “Acceptance and Usage of Management Information System in Medium to Large Scale Industries”, International Conference on Mechanical Engineering Technology ICOMET-2012, St. Joseph’s College of Engineering & Technology. Kottayam, 20th and 21stJanuary 2012.
  • Ramachandra C G and T.R.Srinivas, “Acceptance and Usage of Management Information System in Small Scale and Medium to Large Scale Industries”, IEEE International Conference on Advances in Engineering, Science and Management IEEE-ICAESM-2012, EGS Pillay Engineering College, Nagapattinam, 30th and 31stMarch 2012.
  • Ramachandra C G and T.R.Srinivas, “Study on Usage of Management Information System (MIS) in Medium Scale Industries”, International Conference on ‘Recent Advances in Mechanical Engineering INCRAME-2012, Dr. M.G.R Educational and Research Institute University, Chennai, 19th and 20thApril 2012.
  • Ramachandra C G and T.R.Srinivas, “Computer Aided Maintenance Management Information System for A Tyre Manufacturing Industry”, International Conference on Advances in Manufacturing Technology ICAMT-2012, Chennai Institute of Technology, Chennai, 15-17thJune 2012.
  • Ramachandra C G and T.R.Srinivas, “Comparative Study on usage of Management Information System (MIS) in Small Scale and Medium Scale Industries in India”, International Conference on Current Trends in Engineering ICCTEM-2012, VidyaVardhaka College of Engineering, Mysore, 12-14thJuly 2012.
  • Ramachandra C G and T.R.Srinivas, “Management Information System (MIS) applied to Small Scale Industries”, International Conference on Application of Optimization Techniques in Engineering ICAOTE-2012, Kodaikenal, 27th and 28thSeptember2012.
  • Ramachandra C G and Vaishak N. L, “Embedded Robot Control System based on an embedded operating system along with ARM for Robot Application”, International Conference on Control, communication and Computer Technology (ICCCCT) held at Bangalore-2012.
  • Ramachandra C G and T.R.Srinivas, “Application of Computerized Management Information System (MIS) For A Paint Manufacturing Industry”, IEEE International Conference on Research and Development Prospects on Engineering and Technology IEEE-ICRDPET-2013, EGS Pillay Engineering College, Nagapattinam, 29th and 30thMarch 2013.
  • Ramachandra C G and T.R.Srinivas, “A Survey Conducted to Analyze the Factors Influences the Non-Usage of Management Information System (MIS) in Selected Large Scale Industries”, International Conference on Recent Trends in Engineering and Technology ELSEVIER-ICRTET-2014, SNJB’s Late Sau K.B. Jain College of Engineering, Chandwad, 28th to 30th March 2014.
  • Ramachandra C G and Shruthi Y C, “Productivity improvement of castings switching to shell mould process from greensand mould process”, 2nd International Conference on Current Trends in Engineering and Management (ICCTEM-2014) organized by Vidyavardhaka College Of Engineering Mysore during 17- 19 July 2014.
  • Ramachandra C G and Rishi J P, “A Study on Implementation of Lean manufacturing Practices with Special Reference to Automobile Industry”, 2nd International Conference on Current Trends in Engineering and Management (ICCTEM-2014) organized by Vidyavardhaka College Of Engineering Mysore during 17- 19 July 2014.
  • Dr. Ramachandra C G and Prashanth Pai M, “Optimal Inspection Frequency of a Critical Machine in a Machine Tool Manufacturing Unit”, International Convention on Dissemination of Innovative Research in Science, Engineering Technology & Management Applications in association with Society of Professional Engineers, Kuala Lumpur, Malaysia on 11th & 12th March 2017.
  • Dr. Ramachandra C G and Raghavenra M J, “Determination of Flak Wear of a PVD Coated Carbide Tool by Condition Monitoring”, International Convention on Dissemination of Innovative Research in Science, Engineering Technology & Management Applications in association with Society of Professional Engineers, Kuala Lumpur, Malaysia on 11th & 12th March 2017.
  • Dr. Ramachandra C G and Sandesh Hegde, “Efficiency Improvement of the Vertical Axis Wind Turbine by Implementing Permanent Magnet Propelling Phenomena”, International Convention on Dissemination of Innovative Research in Science, Engineering Technology & Management Applications in association with Society of Professional Engineers, Kuala Lumpur, Malaysia on 11th & 12th March 2017.
  • Dr. Ramachandra C G and Rishi J P, “Development of Framework for Lean Manufacturing Implementation in SMEs ”, International Convention on Dissemination of Innovative Research in Science, Engineering Technology & Management Applications in association with Society of Professional Engineers, Kuala Lumpur, Malaysia on 11th & 12th March 2017.
  • Dr. Ramachandra C G and Prashanth Pai M, “Total Productive Maintenance – A Performance Enhancement Strategy for Manufacturing Industries”, International Convention on Dissemination of Innovative Research in Science, Engineering Technology & Management Applications in association with Society of Professional Engineers, Kuala Lumpur, Malaysia on 11th & 12th March 2017.
  • Dr. Ramachandra C G and T R Srinivas, “Vibration Monitoring of Thread Line Mill in a Tyre Manufacturing Industry”, International Convention on Dissemination of Innovative Research in Science, Engineering Technology & Management Applications in association with Society of Professional Engineers, Kuala Lumpur, Malaysia on 11th & 12th March 2017.

National Conference – Papers Presented

  • Ramachandra C G and T.R.Srinivas, “Management Information System in Maintenance an Approach”, National Seminal on Changing Frontiers of Industrial Development in India”, Srinivas Institute of Technology Mangalore, 26th and 27th April 2009
  • Ramachandra C G and T.R.Srinivas, “Maintenance Management Information System applied to a Process Industry”, National Conference on Advances in Mechanical Engineering, NAME-2010, Jawaharlal Nehru National College of EngineeringShimoga, 24th and 25th September 2010
  • Ramachandra C G and T.R.Srinivas, “Maintaining the Maintenance Activities by using Maintenance Management Information System”, National Conference on Advances in Mechanical Engineering AIMEngg-2011, Manipal Institute of Technology Manipal, 3rd -5th January 2011
  • Ramachandra C G and T.R.Srinivas, “Design and Development of Maintenance Management Information System”, National Seminar on Emerging Trends in Indian Service Sector, Srinivas Institute of Technology Mangalore, 26th and 27th April 2011.
  • Ramachandra C G and T.R.Srinivas, “Design and Development of Computer Aided Maintenance Management Information System for a Tyre Manufacturing Industry”, National Research Conference on Innovative Paradigms in Contemporary Management PINNACLE– 2012, S.B. Jain Institute of Technology Nagpur, 28th January 2012
  • Ramachandra C G and T.R.Srinivas, “A Study on Implementation of Maintenance Management Information System for Indian Industries”, National Seminar on Emerging Trends in Indian Service Sector, Srinivas Institute of Technology Mangalore,26th and 27thApril 2012.
  • Ramachandra C G and T.R.Srinivas, “Importance of Computerized Maintenance Management System for Small Scale Industries”, National Seminar on Business in Global Economy: Issues &Challegnes, Srinivas Institute of Technology Mangalore,26thApril 2013.
  • Ramachandra C G and Rohini M, “Design of CNC Milling Fixture for an Aluminum Aerospace Component” National Conference on “Emerging Trends in Engineering Management”, organized by Dept. of Industrial Engineering and Management, held at JSS Academy of Technical Education, Bangalore during 4th and 5th of July 2013.
  • Ramachandra C G and Rizawan N Shaikh, “Prototype Model Of Multi-Load AGV For Material Supply In Manufacturing System”, National Conference Challenges In Research & Technology In The Coming Decades (CRT-2013) at Shree Dharmasthala Manjunatheshwara Institute Of Technology Ujire during 27th & 28th September 2013.
  • Ramachandra C G and Vaishak N L, “Embedded Robot Control System using ARM for Robot Application”, National Conference Challenges In Research & Technology In The Coming Decades (CRT-2013) at Shree Dharmasthala Manjunatheshwara Institute Of Technology Ujire during 27th & 28th September 2013.
  • Ramachandra C G and Shruthi Y C, “Productivity Improvement of castings, switching to Shell mould process from Green sand mould process”, A National level technical paper presentation contest at K.V.G.C.E, Sullia on 25th April 2014
  • Dr. Ramachandra C G and Chandrahas Bekal, “Determination of fracture toughness of through thickness structural flaw butt joint weld of low carbon steels subjected to tensile loading”, A National level technical paper presentation contest at K.V.G.C.E, Sullia on 11th April 2015.
  • Dr. Ramachandra C G and Sandeep Acharya, “Study and Optimization of Granite Processing Plant”, National Joint Conference on Innovations in Engineering and Technology (NJCIET-15) at CEC, Bantawal on 29th April 2015.
  • Dr. Ramachandra C G and Sandesh Hegde, “Central Heating Ventilation Air Conditioning System Optimization for Reduction of Energy Consumption”, National Joint Conference on Innovations in Engineering and Technology (NJCIET-15) at CEC, Bantawal on 29th April 2015
  • Dr. Ramachandra C G and Sandesh Hegde, “Energy Cost Optimization of Heating Ventilation Air Conditioning System (HVAC) by using Building Management System”, National Conference on Research in Science, Engineering and Management (NCRSEM-15) at PESITM, Shivamogga on 2nd May 2015.
  • Dr. Ramachandra C G and Sandeep Acharya, “Study and Optimization of Granite Plant with Process Improvement”, National Conference on Research in Science, Engineering and Management (NCRSEM-15) at PESITM, Shivamogga on 2nd May 2015.
  • Dr. Ramachandra C G and Sandesh Hegde, “Cost Optimization of Heating Ventilation Air Conditioning System (HVAC) for Reduction of Energy Consumption”, National Conference on Research in Science, Engineering and Management (NCRSEM-15) at PESITM, Shivamogga on 2nd May 2015.
  • Dr. Ramachandra C G and Manjunatha B, “Ecotel concept for energy conservation &waste reduction in hotel industries”, National Conference On Power Systems & Industrial Automation (NCPSIA-15) at GSSIETW, Mysuru on 22nd August 2015.
  • Dr. Ramachandra C G and Mohammed Gowspeer, “A Study on Learning and Teaching Styles in Engineering Education”, Two Day NAAC Sponsored National Seminar on Curriculum Design and Development for Student-Centric Learning at SIMS, Mangaluru, 25th & 26th March-2016.
  • Dr. Ramachandra C G and Prashanth Pai M, “Effect of Total Productive Maintenance (TPM) Implementation in Manufacturing and Service Industries – A Review”, Two Day National Conference on Advances in Mechanical Engineering Sciences (NCAMES-2016) at SIT, Mangaluru, 6th & 7th MAY-2016.
  • Dr. Ramachandra C G and Raghavendra M J, “A Study on Different Tool Condition Monitoring System Available to Monitor Tool Flank Wear”, Two Day National Conference on Advances in Mechanical Engineering Sciences (NCAMES-2016) at SIT, Mangaluru, 6th & 7th MAY-2016.
  • Dr. Ramachandra C G and Rudresh Gowda K G, “Development of Interfacing of Quick Change Robot for Tool Change between Tow CNC Machines & Reduction of Tool Changing Time”, Two Day National Conference on Advances in Mechanical Engineering Sciences (NCAMES-2016) at SIT, Mangaluru, 6th & 7th MAY-2016
  • Dr. Ramachandra C G and Sandesh Hegde, “Permanent Magnet Propelled Vertical-Axis Wind Turbine”, Two Day National Conference on Advances in Mechanical Engineering Sciences (NCAMES-2016) at SIT, Mangaluru, 6th & 7th MAY-2016.
  • Dr. Ramachandra C G and Majnunatha Prabhu, “Automatic Quantitative Sorting of Milk Packets on KMF Shimoga Dairy”, Two Day National Conference on Advances in Mechanical Engineering Sciences (NCAMES-2016) at SIT, Mangaluru, 6th & 7th MAY-2016.
  • Dr. Ramachandra C G and Manjunatha B, “Management Information System (MIS) in Hotel Industries to Improve Overall Efficiency”, Two Day National Conference on Advances in Mechanical Engineering Sciences (NCAMES-2016) at SIT, Mangaluru, 6th & 7th MAY-2016.
  • Dr. Ramachandra C G and Palayat Roshen Hemanth, “Automation of an Industrial Grade Steam Generation System using GSM Technology”, Two Day National Conference on Advances in Mechanical Engineering Sciences (NCAMES-2016) at SIT, Mangaluru, 6th & 7th MAY-2016.
  • Dr. Ramachandra C G and Chandrahas Bekal, “Fracture Toughness of Structural Flaw Butt Joint Weld of Low Carbon Steels”, Two Day National Conference on Advances in Mechanical Engineering Sciences (NCAMES-2016) at SIT, Mangaluru, 6th & 7th MAY-2016
  • Dr. Ramachandra C G and Vinayaka Kannantha, “Permanent Automatic Distance Measurement and Breaking for Automobile/AGV (Automated Guided Vehicle) Using Ultrasonic Waves and Accident Detection by GSM, Two Day National Conference on Advances in Mechanical Engineering Sciences (NCAMES-2016) at SIT, Mangaluru, 6th & 7th MAY-2016
  • Dr. Ramachandra C G and Rahul E K, “Automated Railway Signalling and Interlocking System Design Using PLC and SCADA”, Two Day National Conference on Advances in Mechanical Engineering Sciences (NCAMES-2016) at SIT, Mangaluru, 6th & 7th MAY-2016
  • Dr. Ramachandra C G and Neetha K, “A Study on Implementation of Total Quality Management (TQM) in Hospital to Improve Service Quality, Two Day National Conference on Advances in Mechanical Engineering Sciences (NCAMES-2016) at SIT, Mangaluru, 6th & 7th MAY-2016
  • Dr. Ramachandra C G and Lokesh K S, “Effect of E-Waste Filler on Tensile and Flexural Behavior of E- Glass/Epoxy Composites”, Two Day National Conference on Advances in Mechanical Engineering Sciences (NCAMES-2016) at SIT, Mangaluru, 6th & 7th MAY-2016
  • Faculty name: Chandra Jogi- Associate Professor

Publications-After Joining SIT

International Journal – Papers Published

  • Chandra Jogi and Parkash Ratan, “ Auto Metro Train to Shuttle Between Stations,” International Journal and Magazine of Engineering, Technology, Management and Research (IJMETMR), ISSN: 2320-3706, ISSN: 2348-4845(Online): vol. 2, Issue 5, May2015.
  • Chandra Jogi and Parkash Ratan, “ A Driverless Metro Train using ARM7,” International Journal of Innovative Research in Science, Engineering and Technology(IJIRSET), ISSN: 2341-6710, ISSN: 2319-8753(Online): vol. 4, Issue 6, June 2015.
  • Sudheendra H N and Chandra Jogi “A Review on Effect of Chemical Modification on Mechanical Properties of Sugarcane Bagasse Fiber Polymer Composite”, International Journal of Emerging Trends and Technology (Special issue NCAMES-2016), ISSN: 2231-5381, pp 19-21.
  • Chandra Jogi and Sudheendra H N, “Study of EDM parameters on Surface Finish of Hot Die Steel – H13”, International Journal of Emerging Trends and Technology (Special issue NCAMES-2016), ISSN: 2231-5381, pp 77-84.

International Conference – Papers Presented

  • 1.”Auto Metro Train to Shuttle Between Stations” International Conference on Emerging Trend in Engineering and Technology, IFERP, 31st May 2015 at Bangalore.

National Conference – Papers Presented

  • ”Study of EDM parameters on Surface Finish of Hot Die Steel – H13”, NCAMES-2016, May 6th & 7th 2016 at Srinivas Institute of Technology, Valchil, Mangaluru.
  • Faculty name: Raghavendra M J- Assistant Professor

Publications-After Joining SIT

International Journal – Papers Published

  • Raghavendra M J & Dr. Ramachandra C G, “A Review on Tool Flank Wear Monitoring by Tool Condition Monitoring System using Various Approaches”, Global Research and Development Journal for Engineering (GRDJE) ISSN: 2455-5703 Volume No.1 Issue No. 4, March 2016 Page No.07-13.
  • Raghavendra M J & Dr. Ramachandra C G, “ A study on Different Tool Condition Monitoring System Available to Monitor Tool-Flank Wear”, , International Journal of Engineering Trends and Technology (IJETT), Spl. Issue, p-ISSN: 2349-0918,  e-ISSN: 2231-5381, pp.359-364.
  • Raghavendra M J & Dr. Ramachandra C G, “Effect of Total Productive Maintenance (TPM) Implementation in Manufacturing and Service Industries- A Review” , International Journal of Engineering Trends and Technology (IJETT), Spl. Issue, p-ISSN: 2349-0918,  e-ISSN: 2231-5381, pp.346-350.
  • Raghavendra M J & Dr. Ramachandra C G, “OEE – A Tool to Measure the Effectiveness of TPM Implementation in Industries – A Review”, Global Research and Development Journal for Engineering (GRDJE) ISSN: 2455-5703 Volume No.1 Issue No. 12, November 2016 Page No.92-96.
  • Raghavendra M J & Dr. Ramachandra C G, “Optimal Inspection Frequency of a Critical Machine in a Machine Tool Manufacturing Unit”, Journal of Engineering Technological Research (JETR) ISSN: 2229-9262, Volume No.8, March 2017 Page No.179-182.
  • Raghavendra M J and Dr. Ramachandra C G, “Determination of Flak Wear of a PVD Coated Carbide Tool by Condition Monitoring”, Journal of Engineering Technological Research (JETR) ISSN: 2229-9262, Volume No.8, March 2017 Page No.108-113.
  • Raghavendra M J and Dr. Ramachandra C G, “Total Productive Maintenance – A Performance Enhancement Strategy for Manufacturing Industries”, Journal of Engineering Technological Research (JETR) ISSN: 2229-9262, Volume No.8, March 2017 Page No.305-311.
  • Raghavendra M J and Dr. Ramachandra C G, “Vibration Monitoring of Thread Line Mill in a Tyre Manufacturing Industry”, Journal of Engineering Technological Research (JETR) ISSN: 2229-9262, Volume No.8, March 2017 Page No.174-178.

International Conference – Papers Presented

  • Raghavendra M J & Dr. Ramachandra C G, “Optimal Inspection Frequency of a Critical Machine in a Machine Tool Manufacturing Unit”, International Convention on Dissemination of Innovative Research in Science, Engineering Technology & Management Applications in association with Society of Professional Engineers, Kuala Lumpur, Malaysia on 11th & 12th March 2017.
  • Raghavendra M J & Dr. Ramachandra C G, “Determination of Flak Wear of a PVD Coated Carbide Tool by Condition Monitoring”, International Convention on Dissemination of Innovative Research in Science, Engineering Technology & Management Applications in association with Society of Professional Engineers, Kuala Lumpur, Malaysia on 11th & 12th March 2017.
  • Raghavendra M J & Dr. Ramachandra C G, “Vibration Monitoring of Thread Line Mill in a Tyre Manufacturing Industry”, International Convention on Dissemination of Innovative Research in Science, Engineering Technology & Management Applications in association with Society of Professional Engineers, Kuala Lumpur, Malaysia on 11th & 12th March 2017.
  • Raghavendra M J & Dr. Ramachandra C G, “Total Productive Maintenance – A Performance Enhancement Strategy for Manufacturing Industries”, International Convention on Dissemination of Innovative Research in Science, Engineering Technology & Management Applications in association with Society of Professional Engineers, Kuala Lumpur, Malaysia on 11th & 12th March 2017.

National Conference – Papers Presented

  • Raghavendra M J & Dr. Ramachandra C G, “ A study on Different Tool Condition Monitoring System Available to Monitor Tool-Flank Wear”, Proceedings of the National Conference on Advances in Mechanical Engineering Sciences (NCAMES-2016), Srinivas Institute of Technology, Valachil, Mangaluru, Karnataka, India, 6-7 May 2016.
  • Raghavendra M J & Dr. Ramachandra C G, “Effect of Total Productive Maintenance Implementation in Manufacturing and Service Industries- A Review”, Proceedings of the National Conference on Advances in Mechanical Engineering Sciences (NCAMES-2016), Srinivas Institute of Technology, Valachil, Mangaluru, Karnataka, India, 6-7 May 2016.
  • Faculty name: Nithin Joshuva –Assistant Professor

Publications-After Joining SIT

International Journal – Papers Published

  • Nithin joshuva. ” Study and analysis of process capability of 4000 ton Mechanical press using 8D method ” IJETT , NCAMES, May 2016.
  • Nithin joshuva & Dr Thomas Pinto, ” A study on Analysis of condition based maintenance for general purpose machineries for fault diagnostic -A review , IJETT , May 2016
  • Nithin joshuva , criston vinuth ,” Compression behaviour of Al6061 / Al203 graphite hybrid composite materials”  , NCAMES , May 2016
  • Faculty Name: Naveen C R- Assistant Professor

Publications-After Joining SIT

International Journal – Papers Published

  • Mr. Naveen C R, Thomas Pinto.,“A study on mechinability of hybrid metal matrix composites- A review”, National Conference on AMES, SIT, Mangaluru, May 6th -7th 2016, IJETT, P-ISSN: 2349-0918.
  • Mr. Naveen C R, Somashekar L S.,“Flow analysis by using moldflow software for chair handle part”, National Conference on AMES, SIT, Mangaluru, May 6th -7th 2016, IJETT, P-ISSN: 2349-0918.
  • Mr. Naveen C R, Thomas pinto, Ranganath Y H.,“Production and characterization of As cast and heat treated Al2024/SiC/Gr hybrid metal matrix composite”, ICAMS, MCE, Hassan, March 4th -5th 2017, IJESRT, ISSN: 2277-9655.
  • Mr. Naveen C R, Thomas pinto, Kiran Holla.,“EDS analysis and mechanical testing of alumina and graphite particulate aluminium metal matrix composite”, ICAMS, MCE,Hassan, March 4th -5th 2017, GJESR, ISSN: 2348-8034

International Conference – Papers Presented

  • Mr. Naveen C R, Ramesh babu K.,“Design development and analysis of single cavity injection mould tool for chair handle component”,International conference on ETMR, toc H IST, Kochi, Sep 5th & 6th 2012.
  • Mr. Naveen C R, Ramesh babu K.,“Optimizing of the cycle time using conformal cooling for a chair handle part”, International Conference on COMIM, MSRIT, Bangaluru, Feb 11th -13th 2012.

National Conference – Papers Presented

  • Mr. Naveen C R, Ramesh babu K.,“Influence of gate location in the production of a chair handle”, National conference on CAME, KVCET, Kanchipuram, Tamilnadu, Feb 29th 2012.
  • Mr. Naveen C R, Ramesh babu K.,“Design of stacked injection mould tool for inside bracket of pick up head”, National Conference on ETME, RRCE, Bangaluru, Feb 24th and 25th 2012.
  • Mr. Naveen C R, Revanna siddappa, Venkatesh K C.,“Mechanical and wear behaviour of Al6061-SiC-Gr Hybrid composites”, National Conference on AMES,SIT, Mangaluru, May 6th -7th 2016, IJETT, P-ISSN: 2349-0918.
  • Mr. Naveen C R, Sathisha K G., “Fabrication and Characterization of as cast and heat treated Al2024/Al2O3/Gr hybrid metal matrix composites”, national conference on TTMT, SJBIT, Banglore, May 10th 2017.
  • Faculty name: Ranghanath Y H- Assistant Professor

Publications-After Joining SIT

International Journal – Papers Published

  • Ranganatha Y H . “Investigation On The Effect Of Heat Treatment On Microstructure And Tribological Behavior Of Aisi 2507 Dss”The International Journal of engineering trends and  technology (IJETT), vol. ISSN, pp. 2231-5381, 6th and 7th MAY. 2016, Srinivas Insitute of Technology, Mangaluru.
  • Ranganatha Y H. “Production and Characterization of Cast Heat Treated Al2024/SiC/Gr Hybrid Metal Matrix Composites” International Journal of Engineering Science and Research Technology ISSN: 2277-9655, March-2017
  • Faculty name: Harshavardhan L Hegde-Assistant Professor

Publications-After Joining SIT

International Journal – Papers Published

  • M.C. Math and Harshavardhan L. Hegde, “Experimental studies on performance and combustion characteristics of a compression ignition engine fuelled with Hydnocarpus wightiana methyl ester and its blends with conventional diesel and domestic kerosene “, ISSN: 1759-7269, Biofuels 2017, Taylor & Francis
  • M.C. Math and H. Hegde, “Application of Response Surface Methodology for Optimization of Biodiesel Production by Transesterification of Hydnocarpus Wightiana Seed Oil with Methanol”, International journal of renewable energy research, Vol.6, No.4, 2016

Marine Engineering

  • Faculty name: Dr. Ramachandra C G

Publications- Before Joining SIT

National Conference – Papers Presented

  • Ramachandra C G and Rishi J P, “Recent Trends in Condition Monitoring of Machinery”, AICTE sponsored National Conference, NMAMIT Nitte, 21st and 22nd March 2002.
  • Ramachandra C G and Rishi J P, “Recent Trends in Condition Monitoring of Machinery”, AICTE sponsored National Conference, NMAMIT Nitte, 21st and 22nd March 2002
  • Ramachandra C G and Rishi J P, “Recent Trends in Condition Monitoring of Machinery”, AICTE sponsored National Conference, NMAMIT Nitte, 21st and 22nd March 2002

Publications-After Joining SIT

International Journal – Papers Published

  • C.G. Ramachandra and T.R.Srinivas, “Maintenance Management Information System Used in Maintaining the Maintenance Activities of a Board Manufacturing Industry”, International Journal of Industrial Engineering and Technology (IJIET) ISSN 0974-3146,International Research Publication House, Volume 3, Number 2, July-December 2011, Page No. 163-172.
  • Ramachandra C G and T.R.Srinivas, “Acceptance and Usage of Management Information System in Small Scale and Medium to Large Scale Industries”, Advances in Engineering Science and Management, ISBN: 978-1-4673-0213-5,IEEE Explorer – March 2012, Page No. 31-35.
  • Ramachandra C G and T.R.Srinivas, “Acceptance and Usage of Management Information System (MIS) in Small Scale Industries”, International Journal of Research in Commerce & Management (IJRCM) ISSN 2231-5756, Volume 2, Issue 3, March-2012, Page No. 78-82.
  • Ramachandra C G and T.R.Srinivas, “Study On Usage Of Management Information System (MIS) In Medium Scale Industries”, International Journal of Business Research and Manufacturing Management(IJBRMM),ISSN 2231-5439 Business Management Research (BMR), Volume 2, Number 1, April-2012, Page No. 21-26.
  • Ramachandra C G and T.R.Srinivas, “Comparative Study on usage of Management Information System (MIS) in Small Scale and Medium Scale Industries in India”, International Journal of Management Research and Technology (IJMRT), ISSN 0974-3502, Serials Publications, Volume 6, Number 2, July-December 2012, Page No. 165-174.
  • Ramachandra C G and T.R.Srinivas, “Management Information System (MIS) applied to Small Scale Industries”, International Journal of Business Research and Manufacturing Management (IJBRMM) ISSN 2231-5349 (Online) Business Management Research (BMR), Volume 2, Number 3, October-2012, Page No. 01-07.
  • Ramachandra C G and T.R.Srinivas, “Management information system applied to mechanical department of an engineering college”, International Journal of Research in Commerce & Management (IJRCM) ISSN 2231-5756 Volume 2, Issue 11, November-2012, Page No. 21-26.
  • Ramachandra C G and T.R.Srinivas, “Case Study on Comparison of Usage and Acceptance of Management Information System (MIS) in Medium Scale and Large Scale Organizations”, International Journal of Engineering, Science and Innovative Technology (IJESIT) ISSN: 2319-5967 Volume 1, Issue 2, November-2012, Page No. 125-134.
  • Ramachandra C G and T.R.Srinivas, “A Study on Development and Implementation of a Computerized Maintenance Management Information System for a Process Industry”, International Journal of Engineering and Innovative Technology (IJEIT)ISSN: 2277-3754 Volume 2, Issue 5, November-2012, Page No. 93-99.
  • Ramachandra C G and Vaishak N L, ”Development of ARM Based embedded system for robot application” International Journal of Engineering Science and Innovative Technology (IJESIT) ISSN: 2319-5967 Volume 1, Issue 2, November 2012
  • Ramachandra C G and Vaishak N L, “Embedded Robot Control System based on an Embedded Operating System, the Combination of RISC Microprocessor, DSP & ARM Linux”, International Journal of Engineering and Innovative Technology (IJEIT)ISSN: 2277-3754 Volume 2, Issue 6, December-2012. Page No. 143-147.
  • Ramachandra C G and T.R.Srinivas, “A Study on usage of Management Information System (MIS) in Medium to Large Scale Industries”, International Journal on Recent Trends in Engineering and Technology (IJRTET), ISSN 2158-5563 (Online) ISSN 2158-5555 (Print), Association of Computer Electronics and Electrical Engineers (ACEEE), Vol. 8, No. 1 January-2013, Page No. 60-63.
  • Ramachandra C G and Rizawan N Shaikh, “Prototype Model of Multi-load AGV for Material Supply in Manufacturing System”, International Journal of Inventive Engineering and Sciences (IJIES), ISSN: 2319-9598 Volume 1, Issue 8, July 2013. Page No. 01-05.
  • Ramachandra C G, Sharun Mendonca and John Paul Vas, “Influence of injection pressure on performance of Simarouba biodiesel engine”, International Journal of scientific and engineering research (IJSER) ISSN 2229-5518 volume 4, issue 7, July 2013, Page No. 668-672.
  • Ramachandra C G and Vaishak N L, “Based on the Combination of Advanced RISC Machines and ARM-Linux Development of ArM based Embedded System for Robot Applications”, International Journal of Science, Engineering and Technology Research (IJSETR) ISSN: 2278-7798 Volume 2, Issue 7, July-2013, Page No. 1469-1474.
  • Ramachandra C G and Vaishak N L, “Embedded Robot Control System using ARM for Robot Application”, Research & Technology In The Coming Decades (CRT-2013) ISBN: 978-1-84919-868-4, IEEE Explorer – Sept 2013, Page No. 01-05.
  • Ramachandra C G and T.R.Srinivas, “Design, Development and Implementation of Computerized Maintenance Management Information System (CMMIS) for a Selected Medium Scale Industry”, International Journal of Science, Engineering and Technology Research (IJSETR) ISSN: 2278-7798, Volume 2, Issue 8, August-2013, Page No. 1634-1643.
  • Ramachandra C G and T.R.Srinivas, “Application Of Computerized Management Information System(CMIS) For A Paint Manufacturing Industry”, International Journal of Advances in Engineering Research (IJAER) ISSN: 2231–5152 Volume-6, Issue-3, Sept-2013, Page No. 01-12.
  • Ramachandra C G and Rohini M, “Optimization of Process Parameters For The Production of LH Channel Using CNC Milling”, International Journal of Advances in Engineering Research (IJAER) ISSN: 2231–5152 Volume-6, Issue-4, Oct-2013, Page No. 01-10.
  • Ramachandra C G and Adarsh Kumar H K, “GPS Based Remote Black Box for Airborne Vehicles”, International Journal of Advances in Engineering Research (IJAER) ISSN: 2231–5152 Volume-6, Issue-4, Oct-2013, Page No. 11-25.
  • Ramachandra C G and Krishna Pavana, “Design and Fabrication of Automotive Hydraulic Jack System for Vehicles”, International Journal of Advances in Engineering Research (IJAER) ISSN: 2231–5152 Volume-6, Issue-4, Oct-2013, Page No. 26-39.
  • Ramachandra C G and Rishi J P, “A Study On Implementation Of Lean Manufacturing Practices For An Automobile Industry”, International Journal of Advances in Engineering Research (IJAER) ISSN: 2231–5152 Volume-7, Issue-1, Jan-2014, Page No. 01-09.
  • Ramachandra C G and T.R.Srinivas, “A Survey Conducted to Analyze the Factors Influences the Non-Usage of Management Information System (MIS) in Selected Large Scale Industries” International Journal ELSEViER ISBN: 2978-93-5107-222-5 March-2014.
  • Ramachandra C G and Shruthi Y C, “Productivity Improvement of Castings, Switching to Shell Mould Process from Green Sand Mould Process”, International Journal of Research in Engineering and Technology (IJRET), eISSN: 2319-1163, pISSN: 2321-7308, Volume-3, Issue-5, May 2014, Page No. 594-598.
  • Ramachandra C G and Aaron Christopher Monis, “Automated CVD Reactor Cleaning System Using Relay”, International Journal of Science, Engineering and Technology Research (IJSETR) ISSN: 2278–7798 Volume-3, Issue-6, June-2014, Page No. 1764-1771.
  • Dr. Ramachandra C G and Srinath Pai, “Study of Fuel Injection Pressure and Injection Timing Effect on A Diesel Engine Performance And Emission”, International Journal of Research in Science And Technology (IJRST) ISSN: 2249–0604 Volume-4, Issue-3, July-Sept 2014, Page No. 71-80
  • Dr. Ramachandra C G and Manjunatha B, “Waste Minimization Initiatives and Energy Conservation in Hotel Industries”, International Journal of Research in Science And Technology (IJRST) ISSN: 2249–0604 Volume-4, Issue-3, July-Sept 2014, Page No. 81-89.
  • Dr. Ramachandra C G and T.R.Srinivas, “Condition Monitoring Of Dump Mill Of A Banbury Machine”, International Journal of Advances in Engineering Research (IJAER) ISSN: 2231–5152 Volume-9, Issue-1, Jan-2015, Page No. 32-39.
  • Dr. Ramachandra C G and Shruthi Y C, “Improvement In Productivity Of Castings By Switching From Green Sand Mould Process To Shell Mould Process”, International Journal of Advances in Engineering Research (IJAER) ISSN: 2231–5152 Volume-9, Issue-2, Feb-2015, Page No. 01-11
  • Dr. Ramachandra C G and Sandesh Hegde, “Cost Optimization Of Heating Ventilation Air Conditioning System (HVAC) By Using Building Management System”, International Journal of Advances in Engineering Research (IJAER) ISSN: 2231–5152 Volume-9, Issue-1, Jan-2015, Page No. 58-68.
  • Dr. Ramachandra C G and T.R.Srinivas, “A Study To Verify The Possible Reasons For The Non-Usage Of Management Information System (MIS) In Selected Medium Scale Industries”, International Journal of Transformations in Business Management (IJTBM) ISSN: 2231–6868 Volume-5, Issue-1, Jan-Mar 2015, Page No. 09-17.
  • Dr. Ramachandra C G and Sandeep Acharya, “Optimization Of Automated Granite Processing Plant”, International Journal of Research in Science And Technology (IJRST) ISSN: 2249–0604 Volume-5, Issue-1, Jan-Mar 2015, Page No. 04-14.
  • Dr. Ramachandra C G and Dr. T.R.Srinivas, “Vibration Monitoring Of Blower In A Tyre Manufacturing Industry”, International Journal of Advances in Engineering Research (IJAER) ISSN: 2231–5152 Volume-9, Issue-3, Mar-2015, Page No. 24-35.
  • Dr. Ramachandra C G and Rohini M, “Design Of CNC Milling Fixture For An Aluminum Aerospace Component”, International Journal of Research in Science And Technology (IJRST) ISSN: 2249–0604 Volume-5, Issue-1, Jan-Mar 2015, Page No. 57-67
  • Dr. Ramachandra C G and Sandesh Hegde, “Heating Ventilation Air Condi- toning System Energy cost optimization by Using Building Management System”, International Journal For Scienti_c Research & Development (IJSRD) ISSN: 2321-0613 Volume No.3 Issue No. 2, April 2015 Page No.2303-2306.
  • Dr. Ramachandra C G and Sandeep Acharya, “Study and Optimization of Granite Processing Plant”, International Journal For Scientific Research & Development (IJSRD) ISSN: 2321-0613 Volume No.3 Issue No. 2, April 2015 Page No.2307-2311.
  • Dr. Ramachandra C G and Sandesh Hegde, “Central Heating Ventilation Air Conditioning System Energy cost optimization”, International Journal For Scientific Research & Development (IJSRD) ISSN: 2321-0613 Volume No.3 Issue No. 2, April 2015 Page No.2312-2316.
  • Dr. Ramachandra C G and Randesh Ramanath Kochrekar, “Design and Development of Multifunctional Robot using Rigid and Flexi-body Concept”, International Journal of Multidisciplinary Research and Modern Education (IJMRME) ISSN (Online): 2454-6119 Volume No.1 Issue No. 1, 2015 Page No.376-383
  • Dr. Ramachandra C G and Manjunatha B, “Ecotel concept for energy conservation & waste reduction in hotel industries”, International Journal of Computer Applications (IJCA) ISSN: 0975-8887, Proceedings on NCPSIA-15, Number.01, December 2015 Page No.22-24
  • Dr. Ramachandra C G and Raghavendra M J, “A Review on Tool Flank Wear Monitoring by Tool Condition Monitoring System using Various Approaches”, Global Research and Development Journal for Engineering (GRDJE) ISSN: 2455-5703 Volume No.1 Issue No. 4, March 2016 Page No.07-13.
  • Dr. Ramachandra C G and Prashanth Pai M, “Effect of Total Productive Maintenance (TPM) Implementation in Manufacturing and Service Industries – A Review”, Proceeding of National Conference on Advances in Mechanical Engineering Science-International Journal of Emerging Trends in Technology (IJETT) ISSN: 2231-5381, May-2016 Page No.346-350.
  • Dr. Ramachandra C G and Raghavendra M J, “A Study on Different Tool Condition Monitoring System Available to Monitor Tool Flank Wear”, Proceeding of National Conference on Advances in Mechanical Engineering Science-International Journal of Emerging Trends in Technology (IJETT) ISSN: 2231-5381, May-2016 Page No.359-364.
  • Dr. Ramachandra C G and Rudresh Gowda K G, “Development of Interfacing of Quick Change Robot for Tool Change between Tow CNC Machines & Reduction of Tool Changing Time”, Proceeding of National Conference on Advances in Mechanical Engineering Science-International Journal of Emerging Trends in Technology (IJETT) ISSN: 2231-5381, May-2016 Page No.380-382.
  • Dr. Ramachandra C G and Sandesh Hegde, “Permanent Magnet Propelled Vertical-Axis Wind Turbine”, Proceeding of National Conference on Advances in Mechanical Engineering Science-International Journal of Emerging Trends in Technology (IJETT) ISSN: 2231-5381, May-2016 Page No.383-386.
  • Dr. Ramachandra C G and Majnunatha Prabhu, “Automatic Quantitative Sorting of Milk Packets on KMF Shimoga Dairy”, Proceeding of National Conference on Advances in Mechanical Engineering Science-International Journal of Emerging Trends in Technology (IJETT) ISSN: 2231-5381, May-2016 Page No.396-398.
  • Dr. Ramachandra C G and Manjunatha B, “Management Information System (MIS) in Hotel Industries to Improve Overall Efficiency”, Proceeding of National Conference on Advances in Mechanical Engineering Science-International Journal of Emerging Trends in Technology (IJETT) ISSN: 2231-5381, May-2016 Page No.399-405.
  • Dr. Ramachandra C G and Palayat Roshen Hemanth, “Automation of an Industrial Grade Steam Generation System using GSM Technology”, Proceeding of National Conference on Advances in Mechanical Engineering Science-International Journal of Emerging Trends in Technology (IJETT) ISSN: 2231-5381, May-2016 Page No.74-76.
  • Dr. Ramachandra C G and Chandrahas Bekal, “Fracture Toughness of Structural Flaw Butt Joint Weld of Low Carbon Steels”, Proceeding of National Conference on Advances in Mechanical Engineering Science-International Journal of Emerging Trends in Technology (IJETT) ISSN: 2231-5381, May-2016 Page No.95-99.
  • Dr. Ramachandra C G and Vinayaka Kannantha, “Permanent Automatic Distance Measurement and Breaking for Automobile/AGV (Automated Guided Vehicle) Using Ultrasonic Waves and Accident Detection by GSM”, Proceeding of National Conference on Advances in Mechanical Engineering Science-International Journal of Emerging Trends in Technology (IJETT) ISSN: 2231-5381, May-2016 Page No.100-103.
  • Dr. Ramachandra C G and Rahul E K, “Automated Railway Signalling and Interlocking System Design Using PLC and SCADA”, Proceeding of National Conference on Advances in Mechanical Engineering Science-International Journal of Emerging Trends in Technology (IJETT) ISSN: 2231-5381, May-2016 Page No.01-05.
  • Dr. Ramachandra C G and Lokesh K S, “Effect of E-Waste Filler on Tensile and Flexural Behavior of E- Glass/Epoxy Composites”, Proceeding of National Conference on Advances in Mechanical Engineering Science-International Journal of Emerging Trends in Technology (IJETT) ISSN: 2231-5381, May-2016 Page No.184-188.
  • Dr. Ramachandra C G and Neetha K, “A Study on Implementation of Total Quality Management (TQM) in Hospital to Improve Service Quality”, Proceeding of National Conference on Advances in Mechanical Engineering Science-International Journal of Emerging Trends in Technology (IJETT) ISSN: 2231-5381, May-2016 Page No.22-25.
  • Dr. Ramachandra C G and Rishi J P, “Keys to Succeed in Implementing Total Preventive Maintenance (TPM) and Lean Strategies”, International Journal for Modern Trends in Science & Technology (IJMTST) ISSN: 2455-3778, Volume No.2 Issue No. 7, July-2016 Page No.25-30.
  • Dr. Ramachandra C G and Rishi J P, “Implementation of Lean Strategies in an Automobile Axle Plant”, International Journal of Engineering Technology, Management & Applied Sciences (IJETMAS) ISSN: 2349-4476, Volume No.4 Issue No. 8, August-2016 Page No.74-81.
  • Dr. Ramachandra C G and Prashanth Pai M, “OEE – A Tool to Measure the Effectiveness of TPM Implementation in Industries – A Review”, Global Research and Development Journal for Engineering (GRDJE) ISSN: 2455-5703 Volume No.1 Issue No. 12, November 2016 Page No.92-96.
  • Dr. Ramachandra C G and Rishi J P, “Implementation of Lean Strategies in an Automobile Axle Plant”, International Journal of Advances in Scientific Research & Engineering (IJASRE) ISSN: 5454-8006, Volume No.2 Issue No. 10, November-2016 Page No.01-07.
  • Dr. Ramachandra C G and Prashanth Pai M, “Optimal Inspection Frequency of a Critical Machine in a Machine Tool Manufacturing Unit”, Journal of Engineering Technological Research (JETR) ISSN: 2229-9262, Volume No.8, March 2017 Page No.179-182.
  • Dr. Ramachandra C G and Raghavenra M J, “Determination of Flak Wear of a PVD Coated Carbide Tool by Condition Monitoring”, Journal of Engineering Technological Research (JETR) ISSN: 2229-9262, Volume No.8, March 2017 Page No.108-113.
  • Dr. Ramachandra C G and Sandesh Hegde, “Efficiency Improvement of the Vertical Axis Wind Turbine by Implementing Permanent Magnet Propelling Phenomena”, Journal of Engineering Technological Research (JETR) ISSN: 2229-9262, Volume No.8, March 2017 Page No.235-238.
  • Dr. Ramachandra C G and Rishi J P, “Development of Framework for Lean Manufacturing Implementation in SMEs”, Journal of Engineering Technological Research (JETR) ISSN: 2229-9262, Volume No.8, March 2017 Page No.243-248.
  • Dr. Ramachandra C G and Prashanth Pai M, “Total Productive Maintenance – A Performance Enhancement Strategy for Manufacturing Industries”, Journal of Engineering Technological Research (JETR) ISSN: 2229-9262, Volume No.8, March 2017 Page No.305-311.
  • Dr. Ramachandra C G and T R Srinivas, “Vibration Monitoring of Thread Line Mill in a Tyre Manufacturing Industry”, Journal of Engineering Technological Research (JETR) ISSN: 2229-9262, Volume No.8, March 2017 Page No.174-178.

National Journal – Papers Published

  • Ramachandra C G and T.R.Srinivas, “Maintenance Management Information System applied to a Process Industry”, Journal of Advances in Mechanical Engineering NAME-10, ISBN 978-81-8424-623-0 pp.480-485 Allied Publishers Pvt. Ltd. New Delhi-2010.
  • Ramachandra C G and T.R.Srinivas, “Computer Aided Maintenance Management Information System for A Tyre Manufacturing Industry”, Proceeding of International Conference on Advances in Manufacturing Technology (ICAMT-2012), June 2012.
  • Ramachandra C G and T.R.Srinivas, “Comparative Study on usage of Management Information System (MIS) in Small Scale and Medium Scale Industries in India”, Proceedings of International Conference on Current Trends in Engineering ICCTEM-2012,ISBN 978-93-5051-905-9, July 2012.
  • Ramachandra C G and Vaishak N. L, “Embedded Robot Control System based on an embedded operating system along with ARM for Robot Application”, Proceeding of International Conference on Control, communication and Computer Technology (ICCCCT), ISBN: 978-93-82208-41-9, 2012, Page no. 34-38.
  • Ramachandra C G and T.R.Srinivas, “A Study to Find Out the Influencing Factors for Non-Usage of Management Information System in Selected Small Scale Industries”, Indian Journal of Mechanical Engineering and Research (IJMER) ISSN: 2223-5329, Vol-1, No-1, Aug-2013.

International Conference – Papers Presented

  • Ramachandra C G and T.R.Srinivas, “Maintenance Management Information System Used in Maintaining the Maintenance Activities of a Process Industry” International Conference on Operational Excellence for Global Competitiveness ICOEGC – 2011, R.V. College of Engineering, Bangalore, 3-5th February 2011.
  • Ramachandra C G and T.R.Srinivas, “Acceptance and Usage of Management Information System in Medium to Large Scale Industries”, International Conference on Mechanical Engineering Technology ICOMET-2012, St. Joseph’s College of Engineering & Technology. Kottayam, 20th and 21stJanuary 2012.
  • Ramachandra C G and T.R.Srinivas, “Acceptance and Usage of Management Information System in Small Scale and Medium to Large Scale Industries”, IEEE International Conference on Advances in Engineering, Science and Management IEEE-ICAESM-2012, EGS Pillay Engineering College, Nagapattinam, 30th and 31stMarch 2012.
  • Ramachandra C G and T.R.Srinivas, “Study on Usage of Management Information System (MIS) in Medium Scale Industries”, International Conference on ‘Recent Advances in Mechanical Engineering INCRAME-2012, Dr. M.G.R Educational and Research Institute University, Chennai, 19th and 20thApril 2012.
  • Ramachandra C G and T.R.Srinivas, “Computer Aided Maintenance Management Information System for A Tyre Manufacturing Industry”, International Conference on Advances in Manufacturing Technology ICAMT-2012, Chennai Institute of Technology, Chennai, 15-17thJune 2012.
  • Ramachandra C G and T.R.Srinivas, “Comparative Study on usage of Management Information System (MIS) in Small Scale and Medium Scale Industries in India”, International Conference on Current Trends in Engineering ICCTEM-2012, VidyaVardhaka College of Engineering, Mysore, 12-14thJuly 2012.
  • Ramachandra C G and T.R.Srinivas, “Management Information System (MIS) applied to Small Scale Industries”, International Conference on Application of Optimization Techniques in Engineering ICAOTE-2012, Kodaikenal, 27th and 28thSeptember2012.
  • Ramachandra C G and Vaishak N. L, “Embedded Robot Control System based on an embedded operating system along with ARM for Robot Application”, International Conference on Control, communication and Computer Technology (ICCCCT) held at Bangalore-2012.
  • Ramachandra C G and T.R.Srinivas, “Application of Computerized Management Information System (MIS) For A Paint Manufacturing Industry”, IEEE International Conference on Research and Development Prospects on Engineering and Technology IEEE-ICRDPET-2013, EGS Pillay Engineering College, Nagapattinam, 29th and 30thMarch 2013.
  • Ramachandra C G and T.R.Srinivas, “A Survey Conducted to Analyze the Factors Influences the Non-Usage of Management Information System (MIS) in Selected Large Scale Industries”, International Conference on Recent Trends in Engineering and Technology ELSEVIER-ICRTET-2014, SNJB’s Late Sau K.B. Jain College of Engineering, Chandwad, 28th to 30th March 2014.
  • Ramachandra C G and Shruthi Y C, “Productivity improvement of castings switching to shell mould process from greensand mould process”, 2nd International Conference on Current Trends in Engineering and Management (ICCTEM-2014) organized by Vidyavardhaka College Of Engineering Mysore during 17- 19 July 2014.
  • Ramachandra C G and Rishi J P, “A Study on Implementation of Lean manufacturing Practices with Special Reference to Automobile Industry”, 2nd International Conference on Current Trends in Engineering and Management (ICCTEM-2014) organized by Vidyavardhaka College Of Engineering Mysore during 17- 19 July 2014.
  • Dr. Ramachandra C G and Prashanth Pai M, “Optimal Inspection Frequency of a Critical Machine in a Machine Tool Manufacturing Unit”, International Convention on Dissemination of Innovative Research in Science, Engineering Technology & Management Applications in association with Society of Professional Engineers, Kuala Lumpur, Malaysia on 11th & 12th March 2017.
  • Dr. Ramachandra C G and Raghavenra M J, “Determination of Flak Wear of a PVD Coated Carbide Tool by Condition Monitoring”, International Convention on Dissemination of Innovative Research in Science, Engineering Technology & Management Applications in association with Society of Professional Engineers, Kuala Lumpur, Malaysia on 11th & 12th March 2017.
  • Dr. Ramachandra C G and Sandesh Hegde, “Efficiency Improvement of the Vertical Axis Wind Turbine by Implementing Permanent Magnet Propelling Phenomena”, International Convention on Dissemination of Innovative Research in Science, Engineering Technology & Management Applications in association with Society of Professional Engineers, Kuala Lumpur, Malaysia on 11th & 12th March 2017.
  • Dr. Ramachandra C G and Rishi J P, “Development of Framework for Lean Manufacturing Implementation in SMEs ”, International Convention on Dissemination of Innovative Research in Science, Engineering Technology & Management Applications in association with Society of Professional Engineers, Kuala Lumpur, Malaysia on 11th & 12th March 2017.
  • Dr. Ramachandra C G and Prashanth Pai M, “Total Productive Maintenance – A Performance Enhancement Strategy for Manufacturing Industries”, International Convention on Dissemination of Innovative Research in Science, Engineering Technology & Management Applications in association with Society of Professional Engineers, Kuala Lumpur, Malaysia on 11th & 12th March 2017.
  • Dr. Ramachandra C G and T R Srinivas, “Vibration Monitoring of Thread Line Mill in a Tyre Manufacturing Industry”, International Convention on Dissemination of Innovative Research in Science, Engineering Technology & Management Applications in association with Society of Professional Engineers, Kuala Lumpur, Malaysia on 11th & 12th March 2017.

National Conference – Papers Presented

  • Ramachandra C G and T.R.Srinivas, “Management Information System in Maintenance an Approach”, National Seminal on Changing Frontiers of Industrial Development in India”, Srinivas Institute of Technology Mangalore, 26th and 27th April 2009
  • Ramachandra C G and T.R.Srinivas, “Maintenance Management Information System applied to a Process Industry”, National Conference on Advances in Mechanical Engineering, NAME-2010, Jawaharlal Nehru National College of EngineeringShimoga, 24th and 25th September 2010
  • Ramachandra C G and T.R.Srinivas, “Maintaining the Maintenance Activities by using Maintenance Management Information System”, National Conference on Advances in Mechanical Engineering AIMEngg-2011, Manipal Institute of Technology Manipal, 3rd -5th January 2011
  • Ramachandra C G and T.R.Srinivas, “Design and Development of Maintenance Management Information System”, National Seminar on Emerging Trends in Indian Service Sector, Srinivas Institute of Technology Mangalore, 26th and 27th April 2011.
  • Ramachandra C G and T.R.Srinivas, “Design and Development of Computer Aided Maintenance Management Information System for a Tyre Manufacturing Industry”, National Research Conference on Innovative Paradigms in Contemporary Management PINNACLE– 2012, S.B. Jain Institute of Technology Nagpur, 28th January 2012
  • Ramachandra C G and T.R.Srinivas, “A Study on Implementation of Maintenance Management Information System for Indian Industries”, National Seminar on Emerging Trends in Indian Service Sector, Srinivas Institute of Technology Mangalore,26th and 27thApril 2012.
  • Ramachandra C G and T.R.Srinivas, “Importance of Computerized Maintenance Management System for Small Scale Industries”, National Seminar on Business in Global Economy: Issues &Challegnes, Srinivas Institute of Technology Mangalore,26thApril 2013.
  • Ramachandra C G and Rohini M, “Design of CNC Milling Fixture for an Aluminum Aerospace Component” National Conference on “Emerging Trends in Engineering Management”, organized by Dept. of Industrial Engineering and Management, held at JSS Academy of Technical Education, Bangalore during 4th and 5th of July 2013.
  • Ramachandra C G and Rizawan N Shaikh, “Prototype Model Of Multi-Load AGV For Material Supply In Manufacturing System”, National Conference Challenges In Research & Technology In The Coming Decades (CRT-2013) at Shree Dharmasthala Manjunatheshwara Institute Of Technology Ujire during 27th & 28th September 2013.
  • Ramachandra C G and Vaishak N L, “Embedded Robot Control System using ARM for Robot Application”, National Conference Challenges In Research & Technology In The Coming Decades (CRT-2013) at Shree Dharmasthala Manjunatheshwara Institute Of Technology Ujire during 27th & 28th September 2013.
  • Ramachandra C G and Shruthi Y C, “Productivity Improvement of castings, switching to Shell mould process from Green sand mould process”, A National level technical paper presentation contest at K.V.G.C.E, Sullia on 25th April 2014
  • Dr. Ramachandra C G and Chandrahas Bekal, “Determination of fracture toughness of through thickness structural flaw butt joint weld of low carbon steels subjected to tensile loading”, A National level technical paper presentation contest at K.V.G.C.E, Sullia on 11th April 2015.
  • Dr. Ramachandra C G and Sandeep Acharya, “Study and Optimization of Granite Processing Plant”, National Joint Conference on Innovations in Engineering and Technology (NJCIET-15) at CEC, Bantawal on 29th April 2015.
  • Dr. Ramachandra C G and Sandesh Hegde, “Central Heating Ventilation Air Conditioning System Optimization for Reduction of Energy Consumption”, National Joint Conference on Innovations in Engineering and Technology (NJCIET-15) at CEC, Bantawal on 29th April 2015
  • Dr. Ramachandra C G and Sandesh Hegde, “Energy Cost Optimization of Heating Ventilation Air Conditioning System (HVAC) by using Building Management System”, National Conference on Research in Science, Engineering and Management (NCRSEM-15) at PESITM, Shivamogga on 2nd May 2015.
  • Dr. Ramachandra C G and Sandeep Acharya, “Study and Optimization of Granite Plant with Process Improvement”, National Conference on Research in Science, Engineering and Management (NCRSEM-15) at PESITM, Shivamogga on 2nd May 2015.
  • Dr. Ramachandra C G and Sandesh Hegde, “Cost Optimization of Heating Ventilation Air Conditioning System (HVAC) for Reduction of Energy Consumption”, National Conference on Research in Science, Engineering and Management (NCRSEM-15) at PESITM, Shivamogga on 2nd May 2015.
  • Dr. Ramachandra C G and Manjunatha B, “Ecotel concept for energy conservation &waste reduction in hotel industries”, National Conference On Power Systems & Industrial Automation (NCPSIA-15) at GSSIETW, Mysuru on 22nd August 2015.
  • Dr. Ramachandra C G and Mohammed Gowspeer, “A Study on Learning and Teaching Styles in Engineering Education”, Two Day NAAC Sponsored National Seminar on Curriculum Design and Development for Student-Centric Learning at SIMS, Mangaluru, 25th & 26th March-2016.
  • Dr. Ramachandra C G and Prashanth Pai M, “Effect of Total Productive Maintenance (TPM) Implementation in Manufacturing and Service Industries – A Review”, Two Day National Conference on Advances in Mechanical Engineering Sciences (NCAMES-2016) at SIT, Mangaluru, 6th & 7th MAY-2016.
  • Dr. Ramachandra C G and Raghavendra M J, “A Study on Different Tool Condition Monitoring System Available to Monitor Tool Flank Wear”, Two Day National Conference on Advances in Mechanical Engineering Sciences (NCAMES-2016) at SIT, Mangaluru, 6th & 7th MAY-2016.
  • Dr. Ramachandra C G and Rudresh Gowda K G, “Development of Interfacing of Quick Change Robot for Tool Change between Tow CNC Machines & Reduction of Tool Changing Time”, Two Day National Conference on Advances in Mechanical Engineering Sciences (NCAMES-2016) at SIT, Mangaluru, 6th & 7th MAY-2016
  • Dr. Ramachandra C G and Sandesh Hegde, “Permanent Magnet Propelled Vertical-Axis Wind Turbine”, Two Day National Conference on Advances in Mechanical Engineering Sciences (NCAMES-2016) at SIT, Mangaluru, 6th & 7th MAY-2016.
  • Dr. Ramachandra C G and Majnunatha Prabhu, “Automatic Quantitative Sorting of Milk Packets on KMF Shimoga Dairy”, Two Day National Conference on Advances in Mechanical Engineering Sciences (NCAMES-2016) at SIT, Mangaluru, 6th & 7th MAY-2016.
  • Dr. Ramachandra C G and Manjunatha B, “Management Information System (MIS) in Hotel Industries to Improve Overall Efficiency”, Two Day National Conference on Advances in Mechanical Engineering Sciences (NCAMES-2016) at SIT, Mangaluru, 6th & 7th MAY-2016.
  • Dr. Ramachandra C G and Palayat Roshen Hemanth, “Automation of an Industrial Grade Steam Generation System using GSM Technology”, Two Day National Conference on Advances in Mechanical Engineering Sciences (NCAMES-2016) at SIT, Mangaluru, 6th & 7th MAY-2016.
  • Dr. Ramachandra C G and Chandrahas Bekal, “Fracture Toughness of Structural Flaw Butt Joint Weld of Low Carbon Steels”, Two Day National Conference on Advances in Mechanical Engineering Sciences (NCAMES-2016) at SIT, Mangaluru, 6th & 7th MAY-2016
  • Dr. Ramachandra C G and Vinayaka Kannantha, “Permanent Automatic Distance Measurement and Breaking for Automobile/AGV (Automated Guided Vehicle) Using Ultrasonic Waves and Accident Detection by GSM, Two Day National Conference on Advances in Mechanical Engineering Sciences (NCAMES-2016) at SIT, Mangaluru, 6th & 7th MAY-2016
  • Dr. Ramachandra C G and Rahul E K, “Automated Railway Signalling and Interlocking System Design Using PLC and SCADA”, Two Day National Conference on Advances in Mechanical Engineering Sciences (NCAMES-2016) at SIT, Mangaluru, 6th & 7th MAY-2016
  • Dr. Ramachandra C G and Neetha K, “A Study on Implementation of Total Quality Management (TQM) in Hospital to Improve Service Quality, Two Day National Conference on Advances in Mechanical Engineering Sciences (NCAMES-2016) at SIT, Mangaluru, 6th & 7th MAY-2016
  • Dr. Ramachandra C G and Lokesh K S, “Effect of E-Waste Filler on Tensile and Flexural Behavior of E- Glass/Epoxy Composites”, Two Day National Conference on Advances in Mechanical Engineering Sciences (NCAMES-2016) at SIT, Mangaluru, 6th & 7th MAY-2016
  • Faculty Name: Dr. Kripa M Suvarna- Professor

Publications-After Joining SIT

  1. International Journal – Papers Published
    • Kripa.M. Suvarna, K.Rajendra Udupa & A.O.Surendranathan, “Microbial effects on heat treated on 316L Weldments in marine water”, Advanced Materials Research Vol. 794(2013) pp 606-617.
    • Kripa.M. Suvarna, K.Rajendra Udupa & A.O.Surendranathan, “ Corrosion studies on 316L fusion zone and base metal in natural sea water by weight loss method”, Journal of Metallurgical and Materials Science, Vol 55, No.2, Apr- Jun 2013, pp 159 -166.
    • Kripa.M. Suvarna, K.Rajendra Udupa & A.O.Surendranathan, “Influence of Acetobacter suboxydans on aged 316L in sea water”, Universal Journal of Materials Science 2(2): 27-35, 2014.
    • Kripa.M. Suvarna, K.Rajendra Udupa & A.O.Surendranathan, “ Corrosion behaviour of AISI 316L weldments on different aqueous and media and Marine water”, Proceedings of the 11th International conference on High Nitrogen Steels and Interstitial Alloys, Sept 27-29, 2012, Chennai, India, pp359-368.
    • Kripa.M. Suvarna, K.Rajendra Udupa & A.O.Surendranathan, “Corrosion behaviour of AISI 316L weldments on different aqueous media”, Proceedings of ASMP (2012) International conference on Aug 30-31, 2012, Chennai, India.
    • Georgie S Puthanpurackal, Mohd. Raffi Ichangi, Grithen Pinto and Dr. Kripa. M.S, “ Computational Fluid Dynamics simulation of exhaust values in an IC engines” International journal of heat and mass transfer, Vol 1, Issue 1, Jun (2016), 1-8.
    • Abhilash Kidiyoor and Dr. Kripa. M.S, “A study on performance of solar water heater using

Lauric acid- water as thermal storage system”, International journal of heat and mass transfer, Vol 1, Issue 1, Jun 2016, 1-8.

    • Mithun K.V, Kennath Joseph D Coutho, Ligin Cyril, Mohammed Mufeed Abdulla and Dr. Kripa M.S,“Mechanical Behaviors of Banana Fibres with Different Mechanical Properties”, International Journal of Mechanical Engineering, Vol 6, Issue 2, 2016 ISSN :2277-7059.
  1. International Conference – Papers Presented
  • International conference on ASMP (2012), “Corrosion studies on 316L on different aqueous media”, IIT Madras.
  • Conference on Stainless steel Centenary symposium, SSCS (2013), “Microbial effects on heat treated on 316L Weldments in marine water”, IIT Mumbai.
  • Kripa.M. Suvarna, K.Rajendra Udupa & A.O.Surendranathan, “ Corrosion behaviour of AISI 316L weldments on different aqueous and media and Marine water”, Proceedings of the 11th International conference on High Nitrogen Steels and Interstitial Alloys, Sept 27-29, 2012, Chennai, India, pp359-368.
  • Faculty Name: Yashawantha K M – Assistant Professor

Publications-After Joining SIT

  • J. Pasha, M. K. Ramis, and K. M. Yashawantha, “The Effect of Sonication Time on Alumina Nanofluids with Paradoxical Behavior,” Nano Trends A J. Nanotechnol. Its Appl., vol. 16, no. 3, pp. 31–40, 2014.
  • Faculty Name : Renston Jake Fernandes

Publications-After Joining SIT

National Conference – Papers Presented

  • Authored a published conference paper titled “ Experimental Investigation Of Cycle By Cycle Fluctuations in a 4 – stroke SI Engine using Gasoline-Ethanol Blends” at national conference on RENEWABLE ENERGY TECHNOLOGY 2017 held at VTU research Centre , Mysore.

(ISBN:978-93-86256-57-7)

Nano Technology

  • Faculty name: Dr. Prasad P, Professor and Head, Department of Nano Technology

Before joining SIT

PUBLICATIONS: INTERNATIONAL JORNALS

  • Published an article titled “Miscibility, Thermal, and Mechanical Studies of Hydroxypropyl Methylcellulose/Pullulan Blends”, in Journal of Applied Polymer Science, 110, 444–452, 2008, DOI 10.1002/app.28575
  • Published an article titled “Miscibility Studies of Polysaccharide Xanthan Gum/PVP Blend”, in Journal of Polymers and the Environment, 18, 135–140, 2010, DOI 10.1007/s10924-010-0191-2
  • Published an article titled “In-Vitro release study Metroprolol Succinate from the Bioadhesive films of Pullulan-Polyacrylamide blends”, in International Journal of Polymeric Materials and Polymeric Biomaterials” 61 (4), 300-307, 2012
  • Published an article titled “Studies on the Compatibility of Pullulan-Carboxymethyl Cellulose Blend Using Simple Techniques”, in Malaysian Polymer Journal (MPJ), 3 (2), 13-23, 2008
  • Published an article titled “Miscibility, thermal and mechanical studies of methyl cellulose/poly (vinyl alcohol) blends”, International Journal of research in pharmacy and chemistry, 2 (4), 957- 968, 2012
  • Published an article titled “Investigation on Miscibility of Sodium Alginate/Pullulan Blends”, Journal of Polymers and the Environment, 18 (2), 135-140, 2010, DOI 10.1007/s10924-012-0427-4
  • Published an article titled “Miscibility and Thermal Behavior of Pullulan/Polyacrylamide Blends”, Journal of Macromolecular Science, Part A: Pure and Applied Chemistry, 48,920-926, 2011, DOI: 10.1080/10601325.2011.614864
  • Published an article titled “Miscibility and thermal studies of PVP/Pullulan blends”, in International Journal of Plastic Technology, 14(2), 234–245, 2010, DOI 10.1007/s12588-011-9008-y
  • Published an article titled “Investigation on miscibility on biocompatible guar gum/pullulan polymer blend”, in Malaysian Polymer Journal, 8 (1), 33-37, 2013

After joining SIT

PUBLICATIONS: INTERNATIONAL JORNALS

  • Published an article titled “Miscibility studies of GG/CMC blends in aqueous solution”, in International Journal of Advanced Research in Science and Engineering, 6 (1), 514-523, 2017
  • Published an article titled “Physico-chemical and thermal property studies of GG/CMC blend thin films”, in Journal of Advanced Research in Science and Engineering, 6 (6), 572-578, 2017
  • Published an article titled “Azobenzene dye-sensitized solar cells using TiO2 nanoparticles and carbon nanotubes”, in Journal of Advanced Research in Science and Engineering, 6 (7), 743-749, 2017
  • Faculty Name: Mr. Shareefraju J. Ukkund, Department of Nano Technology

After joining SIT

PUBLICATIONS: INTERNATIONAL JORNALS

  • Published an article titled “Azobenzene dye-sensitized solar cells using TiO2 nanoparticles and carbon nanotubes”, in Journal of Advanced Research in Science and Engineering, 6 (7), 743-749, 2017
  • Accepted for publication titled “Synthesis and characterizationof Ag nanoparticles from pencilliumsps.” in Elsevier, Special Isuue Title “Materials Today”-Proceedings. MSID: #35

Bachelor of Architecture

  • Faculty name: Dr.Shaila Bantanur

JOURNAL PUBLICATION

  • Shaila,S.B., Mahua, M.,R, Shankar.,(2012),Ushering in an Era of Campus Sustainability. Journal of

The Indian Institute of Architects, pp 24-28. ISSN No:0019-4913

  • Shaila,S.B.,Mahua, M.,R, Shankar.,(2012).Sustainability practices in Institutions of Higher

Educational Campuses in India. Kashi journal of Social Sciences, 2 , pp 254-260. ISSN No:2249-

037x

  • Shaila,S.B.,Mahua, M.,R, Shankar.,(2014).Comparative Assessment of awareness of Issues

pertaining to sustainability institutions of higher education. Journal of Environmental Sciences,

International Scientific Journal 3, pp 158-165. ISSN No: 13:978-1499721980

  • Shaila,S.B.,Mahua, M.,R, Shankar.,(2014) Growing awareness of sustainability in institutes of higher education in India; a case study. International journal on Environmental Sciences. 3 (2) pp 83 – 92. ISSN No: 2249-2127
  • Shaila,S.B.,Mahua, M.,R, Shankar.,(2015) Emerging dimensions of sustainability in institutes of

higher education in India, A case study” International Journal of Sustainable Built Environment.

Elsevier Publication 4, 323–329. ISSN No: 2212-6090

  • Shaila,S.B.,Mahua, M.,R, Shankar.,(2015) “Sustainability; Perceptions in a Technological Institution of Higher Education in India”. Journal of Current Science,109, 2198-2203. Impact Factor: 0.967 ISSN No:011-3891
  • Shaila,S,B.,Prashanti Rao.,(2015) “Integrating Sustainability in Creativity ;Study on Informal

settlement of Artists at Raghurajpur,Orissa’.Journal of School of Planning and

Architecture,SPANDREL,10,126-131. ISSN No:2231-4601

CONFERENCE PUBLICATION

  • “Earthquake resistant measures-A sustainable approach through adobe construction”,

Paper published in Indian Institute of Technology Roorkee (IIT Roorkee), India for the

conference on “Disaster Mitigation in Housing in India: an agenda for the future” in April

2010

Masters in Business Administration

  • Faculty name: Prof. Hariprakash U.P

After Joining SIT

  • Prof. Hariprakash U.P, Private Labels In Indian Retail Industry, International Journal of Multidisciplinary Research, ISSN 2231 5780, Vol.1 Issue 8, December 2011.
  • Prof. Hariprakash U.P and Dr. Beeran Moidin B.M , A “Comparative Study on Shopping Variables Influencing Grocery Store Choice among Organised and Unorganised Grocery Shoppers in Dakshina Kannada District, Karnataka, India”, Acme Intellects International Journal of Research in Management, Social Sciences & Technology ISSN 2320 – 2939, Vol- 13 No. 13 Jan 2016.
  • Faculty name: Dr. Ambika Mallya G

After joining SIT

  • Mallya, Ambika G., “Effective Communication and Relevance of Soft Skills” in The Journal of Engineering Education’, 91st Quarterly Issue, vol. XXIII No.3,pp. 11-18, ISSN 0971 – 5843, January 2010.
  • Mallya, Ambika G., “The Unheard Voices: An Analysis of Select Short Stories of Indira Goswami”, in Exploring North-East Indian Writings in English, Vol-1, pp.281-299, Indu, Swami, Eds, , Sarup Book Publishers Pvt Ltd, New Delhi (Book chapter), ISBN-978-81-7625-725-1, 2011.
  • Mallya, Ambika G and Shashikantha K., “Indian Women Writing: Voices from the Periphery-Feminism’s quest towards gender egalitarianism and erasure of violence against women”, in Post- Feminism in India: Myth or Reality?, pp.185-203, Sudhir Narayan, Singh and Dalvir Singh, Gahlawat., Eds., Adhayayan Publishers & Distributors, New Delhi (Book chapter), ISBN 978-81-8435-378-5, 2012.
  • Mallya, Ambika G and Shashikantha K., “The Marginalized Voices: Towards Creating Counter Images”, in .Asian Quarterly-An International Journal of Contemporary Issues, Vol.No.11, Issue No.4, pp. 130-146, ISSN 2229-581X, February 2014.
  • Mallya, Ambika G., A research article “Is There a Kodava Cinema?” by Sowmya Dechamma translated into Kannada as Kodava Cinema Embudideye?,’, in.Lokajnana: A Triannual Research Journal of Cultural Studies in Kannada, Vol:2, Edition:1, pp.51-64, Shetty, Dr.Nithyananda.B, Eds, ISSN 2321-001X, January-April 2014.
  • Mallya, Ambika G. and Shashikantha, K. “Feminism and the Gendered Body in Sarah Aboobackar’s ‘Sahana’: A Saga of Mute Agony”, in Contemporary Women’s Writing in India, pp.151-159, Varun,G. and Mythili, A, Eds., Lexington Books: Lanham, Boulder, New York, London. ISBN 978-1-4985-0210-8(Print), ISBN 978-1-4985-0211-5(electronic) (Book chapter), December 2014.
  • Mallya, Ambika G. and Shashikantha, K “Culture, Patriarchy and Religion with Reference to Indian Feminism: Autobiographical Musings of Sarah Aboobackar”, in Illuminati-A Transnational Journal of Literature, Language and Culture Studies, Volume 5,pp.60-71, ISSN NO.2229-4341, January-December. 2014-15.
  • Mallya, Ambika G and Shashikantha K., “Adaptation-The Dynamics of a Hybrid Medium-Triveni’s Sharapanjara: Portrayal of the feminine from a psychoanalytical perspective” in From Fiction to Film-An Interdisciplinary Approach, pp.86-93, Krishna Prabha,V.P., and Sasidharan, Neeta., Eds.,Fabian Books,ISBN 818733386-3, 2015.
  • Faculty Name: Steevan Robert Tellis

After Joining SIT

  • “The scope of catastrophe bonds as a catastrophe risk financing alternative in india: a study focused on catastrophe losses over the last five years”, excel international journal of multidisciplinary management studies vol.2 issue 2, February 2012, ISSN 2249 8834.
  • Faculty Name: Veena Santhosh Rai

After Joining SIT

  • “On coping Strategies Adopted by Employees in Technical Educational Institution to Manage Stress –an Explorative Study” International conference 37th World Management Congress Indira Gandhi Technological and Medical Sciences University, Ziro Commonwealth Society for Innovation & Research. Date: 3 & 4 December 2016 ,. ISSN2277-9302.Vol.VI, Issue 8(I).(IJMR),pp25-36
  • “Stress management among students and its impact on their effective learning ”Published a paper in International Journal of Engineering Research and Modern Education (IJERME) ISSN (Online): 2455 – 4200 (www.rdmodernresearch.com) Volume I, Issue I, 2016 355 ,pp355-362
  • On “An Outlook of the Status of Rural Women Entrepreneur”: Agribusiness Perspective” at ALVAS Institute of engineering & Technology Department of Business Administration on 30th April 2016.with ISBN No:978-93-81195-86-4,pp.23-28
  • On “Contemporary issues in Work LIFE Balance and stress management on “2nd International Education and Leadership summit IELS 24th feb 2016 in Pune ISSN No-2277,9310,pp.34-37.
  • On “Changing Landscape of E-Commerce-An Effective Sales strategy In Marketing.” Innovative Practices in Management, IT, Education and social Sciences on at Srinivas Institute of Management Studies on 17th October 2015 ISSN No-22490558.pp.388-395.
  • Faculty Name: Mrs.Rashmi

After joining SIT

  • Rashmi “An Outlook of the Status of Rural Women Entrepreneur” ISBN No:978-93-81195-86-4, pp.23-28 April 2016
  • Rashmi “M-Commerce: The Future of E-Commerce” International Research Journal of Commerce, Business and Social Science (IRJCBSS), ISSN: 2277-9310 Vol.VI, Issue 8 (I), December 2016.
  • Rashmi “Contemporary issues in work life balance and Stress management” International Research Journal of Commerce, Business and Social Science (IRJCBSS), ISSN: 2277-9310 Vol .IV, Issue 10 (II), February 2016
  • Faculty name : Mr.Praveena D.

After joining SIT

  • Praveena D “Automation in Banking Sector & its Effectiveness” “International Journal of Multi Disciplinary Research (IJMR) – ISSN 2277-9302 Vol.V,issue11(IV) March, 2016”
  • Praveena D “How to balance the core stake holders of the company?” “International Journal of Multi Disciplinary Research (IJMR) – ISSN 2277-9302 Vol.VI, issue9 (II) Jan, 2017”.
  • Faculty Name: Mrs.Mallika

After joining SIT

  • Mallika “Development of Rural Banks through Rural Entrepreneurship and its changing landscape” ISBN NO: 978-93-81195-86-4 pp.29-31, April 2016.
  • Mallika, “Automation in Banking Sector & Its Effectiveness” International Journal of Multidisciplinary Research (IJMR) ISSN: 2277-9302 Vol. V, Issue 11 (IV) pp. 52-55, March 2016.
  • Mallika “Changing Landscape of E-Commerce-An Effective Sales strategy In Marketing.” International Journal of management, IT and Engineering (IJMIE) ISSN: 2249-0558.pp.388-395, October 2015
  • Faculty name: Pramod Nayak B

After joining SIT

  • Pramod Nayak B “How to balance the core stake holders of the company?” “International Journal of Multi Disciplinary Research (IJMR) – ISSN 2277-9302 Vol.VI, issue9 (II) Jan, 2017”
  • Pramod Nayak B “Contemporary issues in Work Life Balance and Stress Management “International Research Journal of Commerce, Business & Social Science(IRJCBSS) ISSN 2277-9310 Vol.IV, issue 10(II) Feb 2016”
  • Pramod Nayak B “Cross Functional Integration to Optimize Manufacturing Process” “International Journal of Engineering Trends and Technology E-ISSN:2231-5381 P-ISSN:2349-0918 NCAMES, 2016”

Masters in Computer Application

  • Faculty Name: Dr. Shashidhar Kini K, Professor, Department of M.C.A.

After joining SIT

  • Paper entitled “Data Management in Technical Institutions in India with special reference to Karnataka State, D.K. District” is published in the International Journal of Innovative Research in Computer and Communication Engineering (IJIRCCE), Vol, 2, Special Issue 5, October, 2014 with ISSN (Online):2320-9801, ISSN Print: 2320-9798.Impact factor: 4.447.
  • Paper entitled “Business Intelligence for CRM: A Vision of Technical Education” is published in the International Journal of Innovations in Engineering & Technology (IJIET), a peer reviewed journal. ISSN 2319-1058, Vol. 2, Issue 1, February, 2013, pp. 415-419 with impact factor 0.67.
  • Paper entitled “Electronic Customer Relationship Management (e-CRM): Data Integration for Technical Institutions” published in.” Proceedings of International Conference on Internet Computing and Information Communications. Springer India, 2014.
  • Paper entitled “Role of CRM e-Business in Knowledge Economy” is published in International Journal of Commerce and Management Studies – Internationally Indexed Journal. ISSN-2229-5674, Vol.I I, Issue 2, March, 2011.
  • Presented a paper entitled “A Vision of Data Modeling Data Warehousing for Technical Institutions in India” at the “ The 2012 International Conference on Technology & Society in Asia“, at Polytechnic Graduates’ Guild, Singapore on 27-29 October, 2012 sponsored by the Society on Social Implications of Technology (SSIT) of the Institute of Electrical and Electronics Engineers (IEEE).
  • Paper entitled “Enterprise Data Model – A study with reference to Technical Institution” presented at The 2010 International Conference on Web Information Systems and Mining (WISM’10) and the 2010 International Conference on Artificial Intelligence and Computational Intelligence (AICI’10) jointly held from October 22-24, 2010 in the Yuhai International Resort Hotel, in Sanya, Hainan, China and same has published in IEEE International Journal with DOI 10.1109/WISM.2010.111, Vol. II, October, 2010, pp.323-326.
  • Presented a paper entitled “Business Intelligence for CRM: A Vision of Technical Education” at the “International Conference on Emerging Technology Trends in Advanced Engineering Research” at Baselios Mathews II College of Engineering, Kollam on Feb. 20-21, 2012.
  • Presented a paper entitled “A Study on Importance of Business Intelligence in Institutions offering Technical Education” at the National Seminar on “Business in the Global Economy: Issues & Challenges” Organized by Department of MBA, Srinivas Institute of Technology, Mangalore on 26th April, 2013.
  • Presented a paper entitled “A Study on Data Warehousing and CRM” at the National Seminar on “Economic Revival: Business Perspectives and Opportunities” organized by P.G. Department of Business Administration, St. Joseph’s Engineering College, Vamanjoor, Mangalore on 29th-30th April, 2010.
  • Presented a paper entitled “Role of e-CRM in Data Warehousing” at the International Conference on Computer Science and Information Technology (ICCSIT-2010) organized by Department of Information Science Engineering, R.L. Jalappa Institute of Technology, Doddaballapur, Bangalore Rural on 17th-18th, September, 2010. ISBN: 978-81-920011-0-4.
  • Paper entitled “The Role of Information Technology in Customer Relationship Management(CRM)” at the National Conference “MANEGMA-2011” on “From Best Practices to Next Practices – Strategic Rethinking for Sustainable Competitive Advantage” organized by P.G. Department of Business Administration, Srinivas Institute of Management Studies, Pandeshwar, Mangalore on 8th April, 2011.
  • Paper entitled “Importance of Customer Relationship Management (CRM) in Institutions offering Technical Education in India” was accepted (in absentia) at the International Conference on Management of Micro, Small and Medium Enterprises (MSMECON-2011) organized by Institute of Management Technology, Nagpur on 19th-20th August, 2011.
  • Presented a paper entitled “Role of Technology for optimizing Customer Relationship Management” at the National Seminar on “Changing Frontiers of Industrial Development in India” organized by P.G. Department of Business Administration, Srinivas Institute of Technology on October 14, 2009.
  • Presented a paper entitled “Implications of e-CRM with Special reference to e-Business” at the National Conference on “Economic Crisis and Recent Trends in Management” at P.A. College of Engineering on 24th March, 2009.
  • Presented a paper entitled “CRM in e-Business – A Sustainable Social & Economic Change” at the International Conference on “Better Business Practices for Sustainable Social Change” at Justice K.S. Hegde Institute of Management, Nitte on 29-30, December, 2008.
  • Presented a paper entitled “CRM in India – An Analysis” at the International Conference on “Globalization, Development, Public Policy and Management, Emerging Issues” at School of Commerce and Management Studies, Kannur University on March, 9-10, 2008.
  • Faculty name: Mr. Karthik Nayak

After joining SIT

  • Paper entitled “Grid Based Feature Extraction for the Recognition of Indian Currency Notes” published in the “International Journal of Latest Trends in Engineering and Technology (IJLTET), Vol.4, Issue 1, May 2014.

Department of Physics

  • Faculty Name : Dr.K.Suryanarayana

Before joining SIT

  • K.Suryanarayana, S.M.Darmaprakash “Growth and characterization of Calcium strontium tartrate crystals”, Cryst.Res.Technol. (GERMANY) Vol 31, No.2,pp k-11-k15, 1996.
  • K.Suryanarayana, S.M.Darmaprakash “Physico chemical characterisation of Calcium strontium tartrate crystals”,
  • J.Phys.Chem.Solids (USA) Vol 58, No.10,pp 1599-1602. 1997
  • K.Suryanarayana, S.M.Darmaprakash,K.Sooryanarayana, “Optical and structural characteristics of Strontium doped calcium tartrate crystals”, Bull.Mater.Sci., (INDIA) Vol 21, No.1, February 1998
  • K.Suryanarayana, S.M.Darmaprakash, “Crystal growth and characterization of Barium doped calcium tartrate tetra hydrate crystals”, Materials lettters, (USA) Vol 42, pp 92-96, 2000
  • K.Suryanarayana, S.M.Darmaprakash, A.Ananda, “ Electron Spin Resonance studies of X-irradiated barium doped Calcium tartrate tetrahydrate single crystals”, Indian Journal of Pure and Applied Physics,Vol 38,pp 603-605,Aug 2000.
  • K.Suryanarayana, S.M.Darmaprakash, A.Ananda, “ ESR studies of X-irradiated Strontium mixed Calcium tartrate crystals”, Journal of Phy.Chem. of solids (USA),Vol 61,pp 1821-1825,2000
  • K.Suryanarayana, S.M.Darmaprakash, “Physico Chemical Characteristics of Ba2+ mixed Calcium tartrate crystals”, Materials Chemistry and Physics ,Vol 73,pp 31-36, 2002
  • K.Suryanarayana, S.M.Darmaprakash, “Linear and Non-Linear Optical and electromagnetic properties of Ba2+ substituted Calcium tartrate tetrahydrate Crystals”, Materials Chemistry and Physics ,Vol 77,pp 179-184, 2002
  1. After joining SIT
  • K.Suryanarayana, “Fabrication and Characterisation of Ropes from Stem of Eupatorium Odoratum” International Journal of Engineering Research & Technology (IJERT), Vol.6,Issue04,pp 166-168, April 2017

DEPARTMENT OF CHEMISTRY

  • Faculty Name: Dr. Gopalakrishna Bhat.N, Professor &Head

Before Joining SIT

  • N. Gopalakrishna Bhat, B. Narayana and NV Sreekumar ,“Complexometric determination of thallium(III) in low concentration using oxalic acid as releasing agent”, Annali Di Chim.(Italy), 92 139-142, 2002.
  • B. Narayana, N.G.Bhat, K.S.Bhat, C.H.R. Nambiar, B. Ramachandra, A.Joseph, “Selective complexometric determination of copper in ores and alloy composition using 2,2’-bipyridyl as a masking agent”, Microchim.J.64, 221-225, 2000.
  • N.V Sreekumar, N.Gopalakrishna Bhat, B.Narayana, Ronald Aquin Nazareth, Prashanth Hegde, and B.R. Manjunatha ,“Selective complexometric determination of titanium(IV) using sodium potassium tartarate or ascorbic acid as a masking agent”, Mikrochimica Acta, 141, 29-33, 2003.
  • B.Narayana, Mendalin Mathew, N. Gopalakrishna Bhat and N.V. Sreeekumar ,“Spectrophotometric determination of selenium using potassium iodide and starch as reagents”, Microchim.Acta, 141, 175-178, 2003 .
  • C.H. Rahavan Nambiar, B. Narayana, N.V. Sreekumar, Ronald A Nazarath and N. Gopalakrishna Bhat, “Spectrophotometric determination of platinum(IV) using anthranilic acid”, J. Indian Chem.Soc., 79, 778-779, 2002.
  • N. Gopalakrishna Bhat, B.Narayana, Ronald Aquin Nazareth, N.V. Sreekumar and C.H.R. Nambiar, “Spectrophotometric determination of nickel using sulphosalicylic acid”, J. Indian Chem.Soc.,80, 939-940, 2003.
  • N.V. Sreekumar, B. Narayana, R.A. Nazareth, N.G. Bhat, Prashanth Hegde and B. R. Manjunatha , “Indirect complexometric determination of thorium(IV) using 5-sulphosalicylic acid as a masking agent”, , Chem. Anal., 47, 759-764, 2002.
  • N.V. Sreekumar, B. Narayana, , N.Gopalakrishna Bhat, R.A. Nazareth, Prashanth Hegde and B. R. Manjunatha ,“Indirect complexometric determination of cadmium(II) using sodium thiosulphate as masking agent”, Chem.Anal., 47, 765-768, 2002.
  • N.Gopalakrishna Bhat, B. Narayana ,“Complexes of Ag(I), Tl(I), Zn(II), Hg(II), Cd(II), Pd(II), Co(II) and Ni(II) with 4-[(4-dimethylamino-benzylidene)-amino]-5-ethyl-2,4-dihydro-[1,2,4]triazole-3-thione(HDEDT) and 4-[(benzylidene)amino]-6-(t-butyl)-4H-[1,2,4]triazin-3-thione-5-one(HBBTT)”, Synth.React.Inorg.Met.-Org.Chem., 35, 253-262, 2005.
  • N. Gopalakrishna Bhat, B.Narayana, N.V. Sreekumar and Ronald Aquin Nazareth,,Spectrophotometric determination of platinum(IV) using potassium ferrocyanide as a reagent, presented at the XX ICC Conference, Mysore ( 2001) AO-2.
  • Ronald Aquin Nazareth, B.Narayana , N.V. Sreekumar, N. Gopalakrishna Bhat, Spectrophotometric determination of cobalt in alloys using thiocarbohydrazide(TCH), presented at the XX ICC conference, Mysore, AO-3, 2001.
  • N.V. Sreekumar, B. Narayana,. N. Gopalakrishna Bhat, Ronald Aquin Nazareth ,Indirect complexometric determination of thallium(III) using thioglycollic acid as a releasing agent, presented at the XX ICC conference, Mysore, AO-47, 2001.
  • N. Gopalakrishna Bhat, B. Narayana, N.V. Sreekumar and R.A. Nazareth , Indirect complexometric determination of cadmium(II) using citric acid as a masking agent, , presented at the 21st ICC conference, Jabalpur, AP-8, 2002.
  • N. Gopalakrishna Bhat, B. Narayana, N.V. Sreekumar and R.A. Nazareth , Complexo-titrimetric determination of manganese(II) in low concentrations using thioglycollic acid as an indirect masking reagent, , presented at the 21st ICC conference, Jabalpur, AP-7, 2002.
  • N. Gopalakrishna Bhat, B. Narayana, N.V. Sreekumar and R.A. Nazareth,, Indirect complexometric determination of thorium(IV) using tartaric acid as a masking agent, presented at the 21st ICC conference, Jabalpur, AO-34, 2002.
  • N. Gopalakrishna Bhat, B. Narayana, N.V. Sreekumar and R.A. Nazareth, Indirect complexometric determination of mercury(II) using 4-amino-5-ethyl-4H-[1,2,4]triazole-3-thiol as a masking agent, presented at the 21st ICC conference, Jabalpur, AO-35, 2002.
  • N. Gopalakrishna Bhat, B. Narayana, N.V. Sreekumar and R.A. Nazareth, Synthesis and characterization of complexes of Ag(I), Tl(I), Zn(II), Hg(II), Cd(II), Pd(II), Co(II) and Ni(II) with 4-[(4-dimethylamino-benzylidene)-amino]-5-ethyl-2,4-dihydro-[1,2,4]triazole-3-thione, presented at the 21st ICC conference, Jabalpur, IP-4, 2002.
  • N. Gopalakrishna Bhat, B. Narayana, N.V. Sreekumar and R.A. Nazareth , Complexes of some bivalent metal ions with 4-[(pyridine-2-ylmethylene)-amino]-3-thioxo-6-(t-butyl-3,4-dihydro-2H-[1,2,4]triazin-5-one, , presented at the 21st ICC conference, Jabalpur, IP-5, 2002.

After joining SIT

  • N. Gopalakrishna Bhat and B. Narayana, Indirect complexometric determination of Thorium(IV) using tartaric acid as masking agent, J. Indian Chem.Soc., 89, 427-428, 2012.
  • N. Gopalakrishna Bhat & B. Narayana, Indirect complexometric determination of cadmium(II) using citric acid as a masking agent, J. Indian Chem.Soc., 89, 563-565, 2012.
  • Chandrashekar K.G, N. Gopalakrishna Bhat, Nagaraj P and B. Narayana, Indirect complexometric determination of Manganese(II) using tartaric acid as a masking agent, Journal of Indian Chemical Society, 91, 1973-1975, 2014.
  • Nagaraj P, N. Gopalakrishna Bhat and Chandrashekar K.G, Selective complexometric determination of Titanium(IV) by using 5-Sulphosalicylic acid as releasing agent, Iranian Journal of Analytical Chemistry, 1, 50-52, 2014.
  • Chandrashekar K.G, N. Gopalakrishna Bhat and Nagaraj P, Selective complexometric determination of palladium by using L-Cystine as releasing agent, Asian journal of Chemistry, 27, 882-884, 2015.
  • Chandrashekar K.G, N. Gopalakrishna Bhat and Nagaraj P, A Highly sensitive Spectrophotometric method for the micro level determination of nitrite and nitrate anions by coupling of tetrazotized benzidine and N,N-dimethylaniline, Research Journal of Chemical Sciences, 5(2), 42-47, 2015.
  • Chandrashekar K.G, N. Gopalakrishna Bhat and Nagaraj P, Facile and direct Spectrophotometric determination of palladium(II) with L-Cystine, International Journal of Chemical Studies 2(5), 46-49, 2015.
  • Nagaraj P, N. Gopalakrishna Bhat and Chandrashekar K.G, “Indirect complexometric determination of mercury(II) using L-Cystine as a selective masking agent, International Journal of Chemical Studies, 3(1), 27-29, 2015.
  • Nagaraj Perdur, Gopalakrishna Bhat Nellikalaya and Chandrashekhar Kalchar , Ammonium oxalate as a masking agent for the complexometric determination of Manganese(II), Vietnam Journal of Chemistry, 53(2), 151-155, 2015.
  • Nagaraj P, Gopalakrishna Bhat and Chandrashekhara K.G, Spectrophotometric determination of Palladium by the coloration with 2-mercaptoethanol, , Research Journal of Chemical Sciences, 5(9), 19-26, 2015.
  • Chandrashekhar K.G, Gopalakrishna Bhat N and Nagaraj P, Spectrophotometric determination of Chromium by using sulphanilic acid and N,N-dimethyl aniline, Indian Journal of Chemical Technology, 22, 78-81, 2015.
  • Nagaraj P, Gopalakrishna Bhat N, Chandrashekhar K.G and Chethan Seetharam Harekal , Complexing behaviour of 4-[{3-(4-hydroxy-3-methoxyphenyl)prop-2-enalidene}-amino]-5-ethyl-4H-1,2,4-triazole-3-thiol, , International Journal of Multidisciplinary Research and Development, 3 71-75, 2016.
  • N. Gopalakrishna Bhat and B. Narayana, Indirect complexometric determination of mercury(II) using 2,2’-bipyridyl as masking agent, , presented in NCRTCR 2010, held at NITK Surathkal, Mangalore, OP -9, 2010.
  • Faculty Name: Dr.Chandrshekhar K.G, Associate Professor

Before joining SIT: NIL

After joining SIT:

  • Chandrashekar K.G, N. Gopalakrishna Bhat, Nagaraj P and B. Narayana, Indirect complexometric determination of Manganese(II) using tartaric acid as a masking agent, Journal of Indian Chemical Society, 91, 1973-1975, 2014.
  • Nagaraj P, N. Gopalakrishna Bhat and Chandrashekar K.G, Selective complexometric determination of Titanium(IV) by using 5-Sulphosalicylic acid as releasing agent, Iranian Journal of Analytical Chemistry, 1, 50-52, 2014.
  • Chandrashekar K.G, N. Gopalakrishna Bhat and Nagaraj P, Selective complexometric determination of palladium by using L-Cystine as releasing agent, Asian journal of Chemistry, 27, 882-884, 2015.
  • Chandrashekar K.G, N. Gopalakrishna Bhat and Nagaraj P, A Highly sensitive Spectrophotometric method for the micro level determination of nitrite and nitrate anions by coupling of tetrazotized benzidine and N,N-dimethylaniline, Research Journal of Chemical Sciences, 5(2), 42-47, 2015.
  • Chandrashekar K.G, N. Gopalakrishna Bhat and Nagaraj P, Facile and direct Spectrophotometric determination of palladium(II) with L-Cystine, International Journal of Chemical Studies 2(5), 46-49, 2015.
  • Nagaraj P, N. Gopalakrishna Bhat and Chandrashekar K.G, “Indirect complexometric determination of mercury(II) using L-Cystine as a selective masking agent, International Journal of Chemical Studies, 3(1), 27-29, 2015.
  • Nagaraj Perdur, Gopalakrishna Bhat Nellikalaya and Chandrashekhar Kalchar , Ammonium oxalate as a masking agent for the complexometric determination of Manganese(II), Vietnam Journal of Chemistry, 53(2), 151-155, 2015.
  • Nagaraj P, Gopalakrishna Bhat and Chandrashekhara K.G, Spectrophotometric determination of Palladium by the coloration with 2-mercaptoethanol, , Research Journal of Chemical Sciences, 5(9), 19-26, 2015.
  • Chandrashekhar K.G, Gopalakrishna Bhat N and Nagaraj P, Spectrophotometric determination of Chromium by using sulphanilic acid and N,N-dimethyl aniline, Indian Journal of Chemical Technology, 22, 78-81, 2015.
  • Nagaraj P, Gopalakrishna Bhat N, Chandrashekhar K.G and Chethan Seetharam Harekal , Complexing behaviour of 4-[{3-(4-hydroxy-3-methoxyphenyl)prop-2-enalidene}-amino]-5-ethyl-4H-1,2,4-triazole-3-thiol, , International Journal of Multidisciplinary Research and Development, 3 71-75, 2016.
  • Faculty Name: Mrs SUMANA V. S. Assistant Professor

Before joining SIT: NIL

After joining SIT

  • Sumana V. S., SudhakarY.N., “Miscibility of starch and low molecular weight Poly(ethylene glycol) blends in aqueous medium.” Mapana Journal of Science 15,2, 45-56, 2016
  • Faculty Name: Dr. K.RAGHAVENDRA BHAT Professor

Before joining SIT: NIL

After joining SIT

  • K.Raghavendra Bhat , B. Thimme Gowda , Kinetics and Mechanism of oxidation of iron (II)By N – chloro – p- substituted – benzene sulphonamides. J .Indian Chem.Soc. Vol.78, p 412-416, Aug 2001.
  • K .Raghavendra Bhat , B. Thimme Gowda, , Kinetics and Mechanism of oxidation of iron (II) by substituted N-chlorobenzamides in aqueous Methanol. Oxidation Communications 24, No.4,581-591, 2001.
  • K .Raghavendra Bhat , B. Thimme Gowda, Mechanism of Ru(III) catalysed Tl(III) oxidation of Di- and Tri-substituted phenols in aqueous Acetic acid. A kinetic study. Oxidation Communications 25, No.1,117-141, 2002.

Library

  • Staff Name: Sujatha.B

After joining SIT

  • Sujatha .B, and T.Y Mallaiah, “The Impact of Age and Experience on the Level of Satisfaction and Motivation among Library Professionals” Journal of Advanced research in library and Information Science, Vol.1.No.1, pp.1-6,March.2014.ISSN 2395-2288
  • Sujatha .B, and T.Y Mallaiah, “Motivation of Library professional in the engineering college libraries in Dakshina Kannada” Indian Journals of Library and Information Technology.Vol.4, No.4, pp.27-31, Oct-Dec 2014, ISSN 2249-8489.
  • Sujatha .B, and T.Y Mallaiah, “Use of library Resources, Services, facilities by the faculty of Engineering College in Dakshina Kannada District” Indian Journal of Library and Information Science. Vol. 8, No.3, pp.225-232, Sept-December. 2014, ISSN 0973-9548.
  • Sujatha .B, Pushpalatha .K,and T.Y Mallaiah, “Impact of organizational culture on employee Involvement in LIS Professionals” Journal of Advanced research in library and Information Science, Vol.4 No. 1&2,pp.12-16,July.2017. ISSN 2395-2288.